How to Make Chain Brush Procreate
StyleFrame Team7 min read
To make a chain brush in Procreate, draw a single chain link in white on a black square canvas, export it as a PNG, then import it as the Shape source of a new brush in Brush Studio. Set the Stroke Path spacing so links sit end to end, and set Shape rotation so each link follows the direction of your stroke. Tune Streamline and size dynamics, then test the brush on the drawing pad until the chain reads cleanly at different sizes.
What You Need Before You Start
- Procreate on iPad (an Apple Pencil helps with pressure and snapping, but isn't required)
- A square canvas, 2048 × 2048 px, so the shape source stays sharp at large brush sizes
- A hard-edged brush for drawing the link, such as a monoline brush
- Time for tuning after the first version
Procreate shape sources are grayscale stamps. White areas become paint, black areas become transparent, and grays become partial opacity. Keep that in mind throughout the build.
Step 1: Draw the Chain Link
- Create a new square canvas at 2048 × 2048 and fill the background layer with black.
- Add a new layer and pick white.
- Select a hard-edged brush and raise the size to near maximum.
- Draw an oval or circular loop. Hold the stroke at the end for a moment so QuickShape snaps it to a clean ellipse.
- Add a bar or second loop for the connection if you want a more detailed link.
Keep the link centered with even margins. Procreate stamps the shape from its center, so lopsided artwork makes spacing and rotation look uneven along the stroke.
A Better Chain: Draw a Two-Link Tile
A single repeated oval looks like a string of beads, not a chain. Real chain links alternate between face-on and edge-on. To fake that:
- Draw one wide, open link (face-on) on the left half of the canvas.
- Draw one narrow, thick link (edge-on) on the right half, overlapping slightly.
- Use this pair as the shape source.
The stamp then repeats a face-on/edge-on pair, which sells the interlocking look far better than identical ovals.
Step 2: Prepare and Export the Shape
If you want shading, add it now, but remember the grayscale rule. Gray highlights inside the link won't show up as metallic color. They'll show up as variations in opacity, so the link will look semi-transparent in places. Two options:
- Keep the shape flat (pure white on black) and add metallic shading later with Alpha Lock or a separate layer.
- Use gray deliberately for a soft, engraved effect where the brush deposits less paint in the dark areas.
Before exporting, hide any background layers you don't want in the file. Then go to Actions > Share > PNG and save the file. Keep the original layered Procreate file so you can revise the link later without redrawing it.
Step 3: Create the Brush in Brush Studio
- Open the Brush Library and tap + to create a new brush.
- Name it at the bottom of the Brush Studio panel, for example "Chain Brush."
- Open Shape, tap Edit, then Import and choose your PNG from Photos or Files.
- Confirm the preview shows the link centered and legible. If the link looks inverted, flip the black and white values in your source.
- Optionally, clear or replace the default Grain source so texture doesn't break up the links.
Step 4: Tune the Settings That Make It Behave Like a Chain
Menu names and slider ranges shift slightly between Procreate versions, so treat the values below as starting points.
Stroke Path
- Spacing: This controls how far apart stamps land. Tiny values smear the shape into a solid line. For a chain, push it up until the links sit end to end. Pulling it back slightly so neighboring links overlap gives the impression that they interlock.
- Jitter: Keep this at zero so the chain stays on the line.
- Fall Off: Leave it at zero unless you want links to fade at the stroke's end.
Stabilization
- Streamline: Raise it for smooth, flowing curves. Chains look wrong with shaky, wobbly paths, so be generous here.
Shape Behavior
- Rotation / Azimuth: Set the shape to follow the direction of your stroke. Without this, every link stays upright regardless of stroke angle, and the chain breaks down on curves. Test by drawing a loop. If the links twist with the path, you're done.
- Scatter and Randomized: Keep both at zero. Small amounts of randomness can add a hand-made feel later, but they ruin the mechanical rhythm of a chain.
Properties
- Set a Maximum Size that suits your canvas and a Minimum Size that keeps tiny chains legible.
- Adjust Size and Opacity dynamics under Apple Pencil settings so pressure doesn't produce unwanted fading. Many artists turn pressure-driven opacity off for this kind of brush and leave size responsive.
Step 5: Test and Refine
Use the Drawing Pad at the bottom of Brush Studio to try the brush while you edit. Check these cases:
- A long, straight line (spacing consistency)
- A tight curve (rotation and link overlap)
- A tiny stroke (does the link remain readable?)
- A large stroke (is the shape source sharp enough?)
If links look pixelated at large sizes, rebuild the shape at a higher resolution or cut the maximum brush size. If the chain looks like a dotted line, reduce spacing. If it looks like a rope, increase it.
Common Problems and Fixes
Limits of a Stamp-Based Chain Brush
A Procreate chain brush is a repeating 2D stamp. It won't give you real depth, believable gravity, or links that react to light. That's fine for illustration, lettering, and decorative borders, but be honest about it if the work is headed into a motion or compositing pipeline. For a metallic finish, paint highlights and shadows over the stroke on a clipped layer rather than expecting the brush to carry the shading.
Taking the Chain Into a Motion Pipeline
If you're a motion designer or compositor, the brush is usually a starting point for a design, not the finished asset. Some practical ways to carry it forward:
- Export on transparency. Hide the background layer and export PNGs for use as layers in After Effects, Premiere Pro, or Nuke.
- Animate in Procreate. Animation Assist can build a frame-by-frame sequence, which you can export as PNG frames.
- Rebuild procedurally in After Effects. Use the brush art to inform a shape-layer Repeater or a path-based setup, which gives you cleaner control over timing than frame-by-frame work.
- Go 3D. For chains that need to hang, swing, or catch light, rebuild the link in Cinema 4D or Blender and use the Procreate drawing as a design reference.
Where Styleframe Fits
If you want the drawn chain to move or gain dimension without rebuilding everything by hand, Styleframe can pick up from your Procreate art. It's an AI video and motion tool built around artistic control, where generations are driven by your reference images, clips, and keyframes instead of a one-click black box.
Practical ways to use it with this kind of asset:
- Frames-to-Video: Set keyframes of your chain at different positions or poses and generate the motion between them.
- Restyle and Ink-and-Paint: Use your drawing as a style reference so generated footage matches your line quality and finish.
- 2D-to-3D and Turntable: Turn a flat link or chain design into a 3D view, then rotate it to check how it reads from other angles.
- Remove Background: Clean up elements for compositing.
Check which export formats are available so you can bring the result into After Effects or Nuke and keep your usual compositing, grading, and finishing workflow. Your Procreate brush work stays the creative source, and Styleframe extends it into motion.
Quick Checklist
- Square 2048 × 2048 canvas with a white link on black
- PNG exported and imported as the Shape source
- Spacing set so links connect
- Shape rotation following the stroke
- Jitter and scatter at zero
- Streamline raised for smooth paths
- Tested on straight lines, curves, and at small and large sizes
Once the base brush works, duplicate it and make variations, such as a thin jewelry chain, a heavy industrial chain, or a rope-like twist, so you've got a reusable set for future projects.