How to Make Bubble Letters in Procreate
StyleFrame Team7 min read
To make bubble letters in Procreate, set up a high-resolution canvas, type or sketch a guide word, and trace a rounded, evenly thick outline around each letter on a new layer. Then fill the shapes with ColorDrop and add highlights and shadows on clipped layers so they read as puffy and glossy. Keep each letter on its own layer, and you can export a layered PSD or transparent PNGs for animation in After Effects.
Set Up the Canvas for Production Use
Many Procreate bubble letter tutorials target social posts and stickers. If your lettering will end up in a motion piece, set the canvas up for that from the start.
- Canvas size: Create a custom canvas at your delivery resolution or larger, such as 3840×2160 for UHD. Decide early how many layers you need.
- Color profile: Choose RGB. Display P3 is fine if your After Effects project is color managed, but sRGB is the safest default if you aren't sure.
- Background: Leave the background color layer hidden when you export, so you get transparency instead of a baked-in color.
- Layer plan: Put every letter, and eventually its fill, shading, and highlights, in separate layers or groups. It costs a few extra minutes and saves a lot of time when you animate.
Method 1: Trace Over a Text Guide
This is a fast way to get consistent, readable letterforms, and it's an approach many video tutorials take.
- Add the text. Open Actions, tap Add, then Add Text. Type your word in caps or lowercase.
- Pick a heavy font. A thick, rounded sans gives you generous room to inflate. Thin fonts leave little space to build up a puffy outline.
- Space the letters out. Increase kerning so the bubble outlines have room. Letters that overlap slightly can look charming, but you want to control that overlap, not get it by accident.
- Lower the opacity of the text layer. It's only a guide. Around 30–40% works well.
- Create a new layer above it for the outline.
- Choose a monoline brush. A simple, uniform-width brush like Monoline (under Calligraphy) works well. Set Streamline in the brush settings to a moderate level so your curves smooth out.
- Trace around the outside of each letter, leaving an even gap between your outline and the guide. Round the corners generously. Close every shape.
The key principle is consistent thickness. Letters can wobble a little and still look charming, but uneven padding around the guide makes the word look lopsided.
Method 2: Draw Stick Letters, Then Inflate Them
If you want a hand-drawn feel without relying on a font, build the letters from skeletons.
- Draw the word as simple single-line "stick" letters on one layer.
- On a new layer, draw a rounded outline around each stick letter, keeping the same distance on both sides of the stroke.
- Where strokes cross or join, as in the crossbar of an "A" or "H", merge the outline into a single shape instead of drawing two overlapping outlines.
- Hide or delete the skeleton layer.
This method gives you more personality and more variation between letters, which suits playful, sticker-like work. It's also easier to push a letter into a bouncy, uneven shape. Turn on a Drawing Guide grid (Actions > Canvas > Drawing Guide) if you want baseline and spacing help.
Optional: Blur-and-Curves Inflation for Fast Results
If you'd rather not trace by hand, you can round off a text layer digitally:
- Rasterize the text layer (tap it and choose Rasterize).
- Apply Gaussian Blur (Adjustments > Gaussian Blur) in Layer mode until the corners soften.
- Open Curves (Adjustments > Curves) and push the curve to tighten the soft edges back into a crisp shape.
The result is a rounded, blobby silhouette that you can then outline and shade. It's less controllable than tracing, and the final shape depends on your blur and curve settings, so treat it as a quick starting point.
Fill the Letters Cleanly
Once your outlines are closed:
- Use ColorDrop. Drag a color from the color wheel into each closed outline. If the fill spills out, there's a gap in your outline. Undo, close the gap, and try again.
- Set Color Fill Threshold. After dropping color, hold your pen on the canvas to adjust the threshold. This helps fill right up to the edge of the line without leaving a halo.
- Put fills on a separate layer under the outline. That lets you change outline and fill colors independently later.
- Use Reference. Set your outline layer as Reference (Layers menu) so ColorDrop on a blank layer uses the outline to find the boundaries.
Add Dimension: Highlights, Shadows, and Depth
Flat bubble letters are fine for stickers. Dimensional ones read as inflated, glossy, or balloon-like, and they hold up better in motion.
Highlights
Create a new layer above the fill and set it as a Clipping Mask. Paint a short, curved white stroke along the upper left of each letter, then add a small dot or two nearby. Even a single highlight curve makes the shape feel glossy.
Shadows and Core Shading
Add another clipped layer and set it to Multiply. Paint a darker tone of the fill color along the lower and right edges, or inside curves where the shape would turn away from the light. Use a soft airbrush for smooth gradients or a hard brush for a cel-shaded look.
Reflected Light
A thin strip of lighter color along the shadow edge, opposite your main light source, makes the letters feel rounder. Keep it subtle.
Drop Shadow and Offset Outline
For a sticker or pop-art look, duplicate your filled letters layer, Alpha Lock it, fill it with a dark color, and nudge it down and to the right behind the original. An offset shadow adds depth with almost no extra work.
Outline Variations
Alpha Lock the outline layer and recolor it to a darker shade of each letter's fill. This usually looks richer than a pure black stroke, especially for glossy balloon styles.
Common Problems and Fixes
- Letters look lumpy: Increase Streamline, or draw longer strokes with fewer stops. Short, hesitant strokes create wobble.
- Uneven thickness: Zoom out frequently. Problems you can't see at 400% zoom show up immediately at full view.
- Fills leak: Zoom in and find the gap in the outline, or increase the ColorDrop threshold.
- Highlights spill outside the letter: Check that the layer is set as a Clipping Mask to the fill layer.
- Letters feel flat: Add a highlight and one shadow layer before adding any more detail.
Export From Procreate for Motion Work
How you export determines how easy the lettering is to animate later.
- Layered PSD: Go to Actions > Share > PSD. After Effects can import the file with separate layers, so you can animate each letter independently. Check blend modes after import, because Procreate's Multiply and clipping behavior may not translate identically.
- Transparent PNGs: Hide the background color layer, then export PNG. For per-letter animation, hide all but one letter and export each separately, or keep them grouped and export the whole word.
- Pre-comp by letter: In After Effects, group each letter's fill, outline, and highlight layers into a precomp so you can add scale, rotation, and position animation without breaking the shading.
- Animation ideas: Letters that look inflated suit squash-and-stretch overshoot on scale, a subtle wiggle on rotation, and staggered entrances. Puppet Pin works well on rounded shapes for a wobbly balloon feel.
If you want to animate frame by frame, Procreate also has built-in animation tools for simple loops. For anything that needs compositing, camera moves, or 3D integration, the After Effects route is more flexible.
Where Styleframe Fits After the Lettering Is Done
Procreate handles the drawing. If you want to push your bubble lettering further into motion or restyled treatments, you can bring your exported artwork into a tool like Styleframe.
Your compositing workflow stays intact. A tool like this can supply additional material, and you keep the final say in your comp.
Quick Workflow Summary
- Create a high-res RGB canvas with a hidden background.
- Type a heavy guide word or sketch stick letters.
- Trace a rounded outline of consistent thickness on its own layer.
- Fill with ColorDrop on a separate layer.
- Add clipped layers for highlights, shadows, and reflected light.
- Add an offset shadow or outline variation for extra depth.
- Export as a layered PSD or transparent PNGs.
- Animate in After Effects, or extend the look with Styleframe before compositing.
Bubble letters are forgiving to draw. The things that make them look professional are consistent outline thickness, a clean fill, and one well-placed highlight. Get those three right in Procreate, and the lettering will be ready for whatever motion treatment comes next.