How to Make Brush Smaller Procreate
StyleFrame Team8 min read
To make a brush smaller in Procreate, drag the top slider in the left sidebar downward until the size preview shrinks. If the brush is still too large at the bottom of the slider, open the brush in Brush Studio, go to Properties, and lower the Max Size under Size Limits. Duplicate the brush first so the original stays untouched.
The Fast Method: The Size Slider
The size slider is the top slider in the sidebar on the left edge of the canvas (the lower one controls opacity). Drag the handle down to shrink the brush and up to enlarge it. While you drag, a preview shows the current size as a percentage.
A few points about how it behaves:
- The value is a percentage, not a pixel measurement. It's a position within the brush's size range, which is defined by the brush's own limits.
For most sketching and linework this is all you need. When the slider hits the bottom and the brush still feels too thick, the limit is coming from somewhere else, and the next sections cover where.
Why the Brush Still Looks Too Big: Canvas Size and DPI
Brush size in Procreate is relative to the canvas, not to your screen. The same 25% stroke looks different on a small canvas than on a large one, even at identical slider values.
This matters for anyone building high-resolution frames. A 3000 × 3000 px canvas at 300 DPI makes the same percentage look smaller and finer than a 1000 × 1000 px canvas. Textured brushes show it most: grain that reads clearly on a small canvas can nearly disappear on a large one.
The reverse is the cause of an oversized brush. If you work on a small or low-resolution canvas, even a low slider value produces a thick stroke relative to the artwork. Before you start editing brush settings, check:
- Canvas dimensions: Open Actions > Canvas > Canvas Information to confirm pixel size and DPI.
- Intended output: If the final frame will be 4K or larger, paint on a canvas close to that size, so brush behavior matches what you'll see in the final composite.
- Brush choice: Some brushes are designed with a broad footprint. A different brush may suit your canvas better than a heavily modified one.
Starting at the right canvas size avoids a lot of later rework, especially if you're passing the artwork on to other tools.
Zoom In Instead of Shrinking Further
Because brush size scales with the canvas, zooming in effectively makes your brush finer relative to the artwork. Pinch to zoom, and the same slider value now covers a smaller area of the image.
This is the standard approach for detail work such as eyes, linework on a character turnaround, small props, or edge cleanup on a matte. Zoom in, paint at a comfortable on-screen size, then zoom out. The strokes are as fine as the zoomed-in view allows, with no need to change the brush.
The trade-off is consistency. If you zoom to different levels throughout a piece, line weights can vary. For illustrations that need uniform line weight, such as a series of style frames, note the slider value and your zoom level, or keep a reference stroke at the edge of the canvas to compare against.
Lower the Maximum Size in Brush Studio
If the brush is too large even with the slider at its minimum, or if you want the whole slider range to be useful for fine work, change the brush's size limits. This reshapes the slider so it covers smaller sizes.
Steps
- Open the Brush Library by tapping the brush icon.
- Find the brush you want. Swipe left on its name and tap Duplicate. A copy appears with a number added to its name, which keeps the original intact.
- Tap the duplicate to open Brush Studio.
- Choose Properties.
- Under Brush Behavior, find Size Limits.
- Drag Maximum Size down to a lower percentage.
- Tap Done and test the brush on a scratch layer.
Now, when the sidebar slider is at the top, the brush will only reach the lower maximum you set, and the entire slider range maps to smaller sizes. That gives you finer control at the bottom of the slider, since the same slider travel is spread over a narrower range.
Forum testing by Procreate users describes the relationship clearly: with a solid square brush source, a Max Size of 50 and Min Size of 0 produced a brush at 50% of the source when the slider was at top, and 25% when the slider was at halfway. In short, the slider operates within the range the size limits define.
Understand How Min Size Interacts With the Slider
Min Size is the other half of the size limits, and it explains many "my brush won't go smaller" complaints.
- Min Size at 0%: The slider can shrink the brush all the way down to a tiny stroke.
- Min Size above 0%: The slider has a floor. Even at the bottom, the brush stays at that minimum.
For example, with Max Size at 100 and Min Size at 50, a slider at the very top gives the full size, but a slider at the bottom only shrinks the brush to half its size. If a brush you downloaded or edited won't go small, check whether someone set a high Min Size. Reducing it to 0 or a low value restores the lower end of the range.
When customizing, a sensible approach is to set Max Size to the largest stroke you'd actually use with that brush and Min Size low enough to reach hairline detail. Treat the slider as the working range and tune the limits to match.
Check Pressure and Apple Pencil Dynamics
Sometimes the brush isn't too big. It reacts to pressure in a way that produces wide strokes. In Brush Studio, the Apple Pencil settings control how pressure and tilt influence size.
If strokes balloon when you press harder:
- Open Apple Pencil in Brush Studio and review the Size setting under Pressure. Reducing it makes the brush hold its size more steadily.
- Check Tilt behavior. Some shading brushes widen dramatically when you tilt the Pencil.
- If every brush feels too heavy, consider whether your overall pressure settings are producing thicker strokes than you intend.
Adjusting these gives you a thinner and more predictable line without touching the size limits.
Keep Texture Consistent When You Resize
When you shrink a textured brush, its grain may not follow. Grain can stay at a fixed scale while the shape shrinks, so fine strokes look noisy, or textures vanish entirely on larger canvases. In Brush Studio, review the Grain settings, particularly the behavior and scale options, and adjust them so the texture stays proportional to the stroke. Test on a fresh layer at several slider positions, such as 5%, 25%, and 100%, before you commit to a brush for a project.
Quick Troubleshooting
Where This Fits in a Motion and VFX Pipeline
Many motion designers and animators use Procreate for the hand-painted portion of their work: style frames, character sketches, texture passes, or key poses. Fine brush control matters because those drawings often become the foundation of everything downstream.
is an AI video and motion tool. Hand-painted frames from Procreate can serve as reference images for it.
That is also why brush precision matters upstream. Clean, deliberate linework and consistent texture in the source art give a reference-driven tool more reliable material to work from.
Your Procreate illustration can stay in the tools you already trust.
A practical workflow looks like this:
- Paint key frames in Procreate at your final output resolution, with brush sizes tuned for consistent line weight.
- Export them as PNG files (or flattened layers) with transparency where needed.
- Use them as references in Styleframe to build motion.
- Finish in your compositing tool of choice.
FAQ
Can I set an exact pixel size for a Procreate brush? Not directly through the slider, which uses percentages. The effective size depends on the brush's source shape, its size limits, and the canvas dimensions. Test strokes on your actual canvas to see the real size.
Will changing Max Size affect my original brush? Only if you edit the original. Duplicate the brush first, as described above, so you can revert easily.
Why do my brushes look different on a new canvas? Brush size is relative to canvas size and resolution, so the same slider value produces different visual results as canvas dimensions change.
Is zooming the same as making the brush smaller? Visually and practically, yes. Zooming in lets the same brush cover less of the artwork, so you get finer detail without altering brush settings.