How to Make Art Transparent Procreate
StyleFrame Team8 min read
To make art transparent in Procreate, tap the N on a layer and drag the Opacity slider to fade it, or hide the Background color layer and export as PNG to get a see-through canvas. To remove a solid white background from flat art, set the layer to Multiply or erase or mask the white. Procreate has no one-tap "make white transparent" command, so the right method depends on whether you want a faded layer, a transparent canvas, or a cut-out of existing artwork.
What "transparent" means in Procreate
People searching this keyword usually mean one of three things, and each has a different fix:
- Reduced layer opacity: the artwork stays on the canvas but lets the layers beneath show through.
- A transparent canvas: nothing sits behind your art, so it exports with an alpha channel.
- Removing a baked-in white background: the image already has opaque white pixels that you want gone.
Mixing these up is the main source of frustration. A flattened JPEG with white pixels will never export as transparent, however many times you toggle the Background color layer.
Method 1: Lower a layer's opacity
This is the fastest way to make art partially transparent.
- Open the Layers panel.
- Tap the N on the right of the layer you want to fade.
- Drag the Opacity slider left to increase transparency.
You can also use Adjustments (magic wand icon) → Opacity and slide your finger left or right across the screen. At 100% the layer is fully opaque, and lower values reveal what is underneath. Tap the Adjustments icon again or choose another tool to commit the change, or tap Cancel to back out.
Two related controls are easy to confuse with this one:
- Brush opacity (the lower slider in the left sidebar) only affects new strokes, not existing pixels.
- Layer opacity affects everything already on that layer, and you can change it at any time without destroying the pixels.
Pick layer opacity when you want a reversible fade, because the underlying art is untouched.
Method 2: Get a transparent canvas
If your goal is a cut-out asset, such as a logo, a character, or a texture overlay, you need real alpha, not just faded pixels.
- Open the Layers panel.
- Untick the Background color layer at the bottom. The checkerboard pattern indicates transparency.
- Make sure none of your own layers contain a white fill.
- Go to Actions (wrench) → Share and choose PNG.
PNG preserves the alpha channel. JPEG does not, which is why some users find that transparent artwork arrives as a white-backed JPG. If that happens, save to Files or the camera roll instead of sending directly through a mail client, and check whether iOS storage optimization is swapping originals for lower-quality copies.
For layered handoff, export a PSD. Each layer keeps its own opacity and blend mode, and you can decide in After Effects or Photoshop what to flatten.
A habit that prevents most problems: never paint a white fill onto a layer you want transparent. Draw on empty layers and let the Background color layer supply the white you see. When that layer is hidden, only your marks remain.
Method 3: Remove a white background from existing art
This is the hard case. Your artwork already has opaque white pixels, perhaps from a scan, a photo of a sketch, or a flattened export. Procreate has no built-in command that converts white to alpha while mapping tonal values to partial opacity. These workarounds get you most of the way there.
Use Multiply for line art
If your art is dark lines on white, set the layer's blend mode to Multiply:
- Tap N on the layer.
- Choose Multiply from the blend mode list.
Multiply darkens whatever is underneath and effectively makes pure white vanish. Place the layer over color or texture and the white disappears visually. This is a blend effect, not true transparency. If you export the layer alone as a PNG, the white will still be there. It works best when you composite inside Procreate or hand the layer to an app that honors the Multiply mode.
Use a layer mask for black-and-white art
A mask method works well on high-contrast art such as comic inks:
- Copy the layer (Actions → Copy, or use the layer's Copy option).
- Add a Mask to the layer from the layer options.
- Select the mask and paste the copied image into it. Invert it if needed so that dark areas stay visible and white areas become hidden.
- If light gray halos remain, set the layer to Multiply to clean them up.
Expect uneven results on art with soft shading, smudges, or color. Masks are driven by brightness, so mid-tones become partial transparency, which may or may not look right.
Select and delete the white
For art with clean shapes, use the Selection tool in Automatic mode:
- Tap the layer, then the Selection tool.
- Tap a white area and drag to adjust the selection threshold.
- Delete the selected pixels, or invert the selection to isolate the subject and delete the rest.
- Clean up fringes with the Eraser.
Selecting and deleting produces hard decisions. Anything that is not selected stays opaque, so anti-aliased edges can keep a faint white halo. Lower the threshold slightly, feather the selection, and zoom in to check the edges against a dark background.
Method 4: Finish transparency in your compositing app
Motion and VFX artists often don't need Procreate to do the keying at all. If you are going to composite the art anyway, it can be faster to export it flat and handle white removal where you have more control.
In After Effects:
- For line art on white, set the layer's blend mode to Multiply. It is non-destructive and keeps soft pencil texture.
- To convert brightness to alpha, try Effects → Keying → Luma Key or a Linear Color Key with the key color set to white. Tweak the tolerance and edge thin/feather to avoid a halo.
- Check Interpret Footage → Alpha. A transparent PNG from Procreate that looks fringed over a dark background may need its alpha interpreted differently (straight versus premultiplied). Toggle it and compare edges.
In Premiere Pro: Place the artwork on a track above your footage and use the Multiply blend mode in Effect Controls for line art, or an Ultra Key or Color Key effect for flat color backgrounds.
In Nuke: Use a Keyer in luminance mode for line art, or copy a processed matte into the alpha with a Copy node, then Premult before merging. Keep an eye on whether your input is premultiplied.
In Blender or Cinema 4D: Import the PNG with alpha as an image texture and enable alpha blending or transparency on the material. If you start with a white-backed image, you can use a Multiply mix, or plug a luminance-derived mask into alpha.
The reasoning is simple: a luminance key in your comp can be tuned and re-tuned, whereas a destructive erase inside Procreate can't be revisited without undoing work.
Animation exports and transparency
If you animate in Procreate, the same rule applies. Hide the Background color layer before exporting, and choose a format that supports alpha, such as a PNG sequence. MP4 has no alpha channel, so it will flatten against a solid color. Run a quick test on a couple of frames in After Effects before exporting a long sequence, so you catch fringing or a stray white layer early.
Where Styleframe fits for transparent assets
If your transparent Procreate art is the starting point for motion work, is useful on the generation side of the pipeline. It is an AI video and motion tool built around artistic control. Each generation is driven by your reference images, video clips, and keyframes rather than a one-click black box, and iteration is non-destructive.
A few of its tools line up with this workflow:
- Remove Background helps when you have a flattened image and need a cut-out without hand-selecting it in Procreate.
- Frames-to-Video lets you set keyframes from your illustrations and generate the motion between them.
- Restyle and Ink-and-Paint use reference-driven style transfer, so you can push footage or renders toward the look of your Procreate artwork.
- 2D-to-3D and Turntable can turn a flat character or object into something you can view from multiple angles.
- 4K Upscale brings generated output up to production-ready resolution.
Output goes out as image sequences, so it slots into the same After Effects or Nuke comp where you are already handling alpha, keying, and color. An After Effects plugin is on the way. You keep your compositing workflow and use Styleframe for the generative step.
Quick troubleshooting
- My export has a white background. The Background color layer is still visible, or a layer has a white fill. Hide it and export as PNG.
- My PNG turned into a JPG. This is usually the share destination. Save to Files or the camera roll and check storage optimization settings.
- There is a white halo around my cut-out. Shrink the selection by a pixel or two, erase the fringe, or fix the alpha interpretation in your compositing app.
- Multiply looks right in Procreate but not in my comp. Multiply is a blend, not alpha. Set Multiply in the comp as well, or convert the white to real alpha with a key.
- Colors look washed out when faded. Lowering opacity blends the layer with whatever is beneath it. Check what sits under the layer, or use Multiply instead.
Summary
Use layer opacity to fade art, a hidden Background color layer plus PNG export for a transparent canvas, and Multiply, masks, or selection to deal with a baked-in white background. For production work, consider exporting flat and keying in After Effects, Nuke, or your 3D app, where you can adjust the result non-destructively.