How to Make Art Prints from Procreate
StyleFrame Team7 min read
To make art prints from Procreate, create the canvas at the final print size plus bleed at 300 DPI, and choose the color profile your printer asks for (usually CMYK, such as GRACoL 2006, or RGB for some labs). Export a flattened duplicate as a high-quality PDF, or as a TIFF for giclée printing, and order a proof before committing to an edition. Many bad prints can be traced to setup mistakes made before the first brushstroke, not to the export.
Start with the print size, not the screen
Procreate defaults to screen-oriented canvases, so the first step is a custom canvas built for paper.
- In the Gallery, tap +, then the custom canvas icon.
- Switch the unit from pixels to inches (or centimeters).
- Enter the final trim size plus bleed.
- Set DPI to 300.
- Name the canvas and save it as a preset so you can reuse it.
An 8" × 10" print with 0.125" bleed on every side becomes 8.25" × 10.25". At 300 DPI that is 2475 × 3075 pixels.
If you're unsure of the final size, build larger. Enlarging a finished raster file forces interpolation, which softens linework and grain. Shrinking is harmless. Standard sizes such as 11" × 14" also make framing easier for buyers.
Motion designers tend to think in pixel dimensions and aspect ratios, so the mental shift is that print size is pixels divided by DPI. A 3840 × 2160 frame is only 12.8" × 7.2" at 300 DPI. This matters later if you're tempted to pull print stills from video.
Mind the canvas limits
Procreate's maximum canvas size and layer count depend on the iPad's RAM. The Layers count shown in the canvas creation dialog drops as dimensions grow. For large formats, plan your layer structure up front: merge finished elements, keep texture passes lean, and avoid stacking dozens of full-size layers.
Choose the right color profile
Color is where print work diverges most from screen work. Procreate lets you pick a profile when you create the canvas.
- RGB is what you see on a display. It's fine for social posts and portfolio pieces, and some digital print labs accept it.
- Adobe RGB (1998) is a better choice if you're scanning originals or sending files for giclée printing.
- CMYK (GRACoL 2006) is the usual choice if you're selling prints through a commercial printer, since it previews more closely how cyan, magenta, yellow, and black inks will behave.
Check your printer's spec sheet before you create the canvas. Changing profiles after painting can shift your colors, and fixing those shifts by hand is tedious. If you work in RGB and convert later, do it in a color-managed app such as Photoshop, review the result, and never send the RGB version to a client as a proof of what the print will look like.
You already know this from broadcast and grading work: wide-gamut, backlit images don't survive a trip to a smaller gamut unchanged. Print is just another delivery spec.
Add bleed and safe margins
Bleed prevents white slivers at the paper edge when the sheet is trimmed.
- Add 0.125" (about 3 mm) of bleed on all sides.
- Extend backgrounds, textures, and color fields into the bleed area.
- Keep text and important details at least 0.25" inside the trim line.
Treat it like title-safe and action-safe areas in video. Printers cut with tolerance, and anything near the edge may be shaved off or look off-center. Use Procreate's drawing guide to mark your trim and safe boundaries on a separate layer, and hide it before export.
Work in layers, export flat
Layers are for you, not the printer. Most print shops want a flattened file.
- Keep line art, color, texture, and type on separate layers while you work.
- Save a layered backup as a
.procreatefile. - Duplicate the canvas before flattening.
- Only flatten the duplicate for export.
Name layers as you go. When a client asks for a color change six months later, you'll want the original structure intact.
Pick the right export format
In Procreate, open Actions → Share (or swipe left on the artwork in the Gallery and tap Share). Your options map to different print situations:
Procreate's Help Center notes that PDF, .procreate, and very high-resolution files can't be saved straight to Photos. Use Save to Files instead. If you share multiple canvases as a single PDF, each artwork becomes its own page, which is handy for bundling a series but not what you want for a single-file submission.
Name files so they're traceable, for example Artwork_8x10_300dpi_CMYK.pdf. It sounds trivial until you have forty versions across a drive.
Check before you send
Zoom to 100% and inspect the whole image. You're looking for:
- Pixelation or soft edges, especially in text and fine linework
- Banding in gradients
- Texture or grain that looks muddy rather than intentional
- Elements creeping into the safe margin
Then order a proof. Your monitor isn't a reliable representation of ink on paper, and the gap widens after an RGB-to-CMYK conversion. A digital or physical proof is cheap insurance for limited editions and client work. Expect printed colors to look slightly darker and less luminous than on a backlit display, and compensate during the proofing pass rather than after the run.
Common mistakes to avoid
- Working at 72 or 132 DPI. Procreate's default pixel density suits screens, not print.
- Resizing after the fact. Upscaling finished artwork softens it.
- Forgetting bleed. You get white edges or an awkward crop.
- Exporting a compressed JPEG. Compression artifacts show up in print.
- Skipping the proof. You find the color shift after paying for the full run.
- Overwriting the layered file. You lose the ability to edit without starting over.
Can you print vector-quality results from raster art?
Yes. Vector art isn't required for professional printing. A high-resolution raster file from Procreate prints well if the canvas size and DPI were right from the start. Vector only becomes necessary when you need infinite scalability, such as signage or die-cut work, in which case rebuild or trace the artwork in a vector tool.
Rescuing artwork made at the wrong size
Sometimes the piece is finished at 72 DPI or too small. Your options:
- Check the effective size: divide pixel dimensions by 300 to see how large you can print at full quality.
- Print smaller. A modest reduction is the cleanest fix.
- Upscale with a dedicated tool and inspect carefully at 100%. Results vary with the art style, and fine hatching and grain are the first things to break.
- Repaint critical areas at a higher resolution when the piece will be sold as a limited edition.
Be especially skeptical of stills pulled from video. A 4K frame won't cover large formats at 300 DPI, so keep a print master separate from any motion deliverable.
Where print work meets motion work
Many motion designers and animators sketch or illustrate in Procreate, then need the same artwork to live in two places: as a gallery or merch print, and as a moving piece. Keeping the pipeline clean on both sides saves rework.
A practical split:
- Print master: the layered Procreate file at final size, 300 DPI, correct profile, with bleed. Never overwritten.
- Motion source: exports of the same artwork, either as flat frames or layer groups, sized for your comp resolution.
Keep one boundary clear: print files still need to come from your Procreate master, built at the right physical size and color profile. Treat generated or upscaled video frames as motion deliverables, not as substitutes for a 300 DPI print file.
Quick pre-flight checklist
- Canvas set to final size plus 0.125" bleed
- 300 DPI
- Color profile matched to your printer's spec
- Key content inside 0.25" safe margin
- Layered backup saved
- Flattened duplicate exported as PDF (or TIFF for giclée)
- Inspected at 100%
- Proof ordered for color-critical or limited-edition work
Follow those steps and a Procreate piece will move from iPad to paper with the sharpness and color you intended, and your original file stays ready for whatever comes next, whether that's a reprint or a motion project.