How to Make Art Look Like Oil Painting Procreate
StyleFrame Team9 min read
To make art look like an oil painting in Procreate, paint with the stock oil painting brush that comes with the app (try the Turpentine brush from the Painting set for texture), build from a loose underpainting, and let colors mix on the canvas instead of stacking in clean layers. Then add a canvas texture and keep brush marks visible. The look comes from opaque, blended color and visible strokes, not from a filter.
What actually makes a piece read as "oil"
Oil paint has a few visual traits you can reproduce deliberately:
- Wet-into-wet blending. Colors smear into each other when you paint over them, unlike acrylic, which dries and layers cleanly.
- Opaque coverage. Oils are usually applied thick enough to hide what's underneath, which is why they suit digital work so well.
- Visible brush direction. Strokes follow form, and edges alternate between soft and broken.
- Surface texture. A canvas weave or bristle texture catches light differently from smooth digital fill.
If your art looks flat or "vector-clean," it's usually missing one or more of these. Fix them in that order: blending, opacity, stroke direction, then texture.
Step 1: Set up the canvas and a reference-based palette
Start with a reference, even if you plan to drift from it. Some painters pull one from Pinterest or their own photos.
- Pick a canvas size. A square works for equal proportions. Procreate's A4 template is slightly taller than wide and suits portraits and still lifes. For work headed to video, create the canvas at your target aspect ratio and resolution instead, so you don't crop later.
- Build a palette from the photo. In the Color panel, open Palettes, tap the plus, and choose New from Photo. Procreate samples the image and gives you a starting set of colors. You'll mix your own as you go, but a palette tied to your reference keeps the color harmony consistent.
- Insert the reference into the canvas. In Actions, use Insert a Photo, then tap and hold on the image to pick up exact colors. You can hide or delete the layer later.
Step 2: Block in an underpainting
Traditional oil painters rarely start with detail. Take a dark gray or black and sketch the large shapes, proportions, and placement on a new layer, checking back against your reference. Because you're digital, you can resize or reposition shapes with the Transform tool, which makes proportion mistakes cheap to fix.
Then block in broad areas of color on separate layers underneath or above the sketch. Keep the shapes big and the edges rough. Detail comes last.
Step 3: Choose and configure the brushes
Procreate ships with what you need. The stock oil painting brush blends colors when you paint over them, which is the behavior you want. The stock Turpentine brush in the Painting set is another option worth trying for an oil-like texture, and some artists try Soft Pastel for its textured edge.
Practical tips:
- Duplicate before editing. Stock brushes can change between Procreate versions. Make a copy of any brush you tweak so your settings aren't lost.
- Keep one main brush. Using a single oil brush for most of the painting gives the piece the coherence of a real brush set, with a few variations for blending and detail.
- Adjust brush size to the stage. Large for blocking, medium for modeling form, small only for final accents.
- Paint on one layer more than you think. Painting across many separate layers prevents colors from mixing. For wet blending, work on a single layer per major area (for example, background, figure, foreground) and paint into existing color directly.
- Use pressure. Heavier pressure for opaque strokes, lighter for thinner passes.
Third-party brush sets built for oils exist too. Some separate dry brushes, which keep colors distinct and show clear texture, from wet brushes, which mix color and darken edges to emphasize texture. The stock set is enough to learn the look first.
Step 4: Add canvas and brush texture
Procreate brushes include both a brush texture (the grain of the stroke) and a paper or canvas texture (the surface the stroke sits on). For many artists, that's enough to get an oil feel without importing anything.
If you want more:
- Try the stock canvas textures. The Warby Canvas texture can work well. Pastel Paper is another option.
- Edit the brush's texture settings. Open the brush, go to the texture options, and change the paper texture or scale in your duplicate.
- Add a texture layer on top. Import a canvas texture image, set it to a blend mode like Multiply, Overlay, or Soft Light, lower the opacity, and check how it reads at 100% zoom. Subtle is better. Heavy texture quickly looks like a filter.
One caution: palette-knife and thick impasto effects are hard to fake digitally and can look strange. If the thick, sculpted paint look is the goal, treat it as a stylistic choice and test it, or use a brush set designed for it, rather than expecting stock brushes to deliver.
Step 5: Blend, break edges, and refine
This is where a painting stops looking digital.
- Blend by painting, not by smudging everything. Pick up neighboring color and drag it across the boundary. Use the smudge tool with an oil brush selected for soft transitions in skies, skin, or backgrounds.
- Vary edges. Keep soft edges where forms turn away, and sharper ones where they catch light or sit in the foreground. Uniformly crisp or uniformly soft edges look artificial.
- Follow the form. Brush strokes on a sphere should curve around it. On a flat wall, they can run in one direction.
- Use temperature shifts. Warm highlights and cooler shadows (or the reverse) give the color variation that real oil paint tends to show.
- Add the last touches. A few confident highlights with a small brush, then stop. Overworking is a common reason digital paintings lose the lightness of traditional ones.
Making existing artwork look like oil paint
If you're starting from a photo, rendering, or flat illustration instead of a blank canvas, the process is to paint over it.
- Place the source image on the bottom layer and lower its opacity.
- Create a new layer above and paint over it with the oil brush, following the form of the subject.
- Work big shapes first, then smaller ones, as you would from a reference.
- Hide the source layer periodically to check that the painting stands on its own.
This approach gives you control over where detail goes, and it avoids the uniform look you'd get from automated filters. It also takes real time, so it's best for key frames, hero illustrations, and style tests.
Bringing a Procreate oil painting into a motion pipeline
For motion designers and VFX artists, a still oil painting is often a starting point.
- Export layers deliberately. Export a layered PSD, or flattened PNGs of grouped layers, so you can separate background, midground, and foreground in After Effects and animate them with parallax.
- Match resolution to your comp. Paint at or above your delivery resolution so you can push in on the canvas.
- Keep the texture consistent. If the camera moves, animate the painting layers but keep a canvas texture layer locked to the frame on top, as it would be on a real canvas.
- Consider a "boil." Hand-painted animation usually shimmers from frame to frame. In After Effects you can approximate that by stepping the frame rate down (for example, with a time-posterizing effect) and applying subtle displacement, though it won't replicate true frame-by-frame painting.
Hand-painting every frame is the most authentic approach. It also scales poorly for anything long.
Where Styleframe fits in an oil-paint workflow
Once you have one frame with the look you want, the hard problem is carrying that look across footage or a sequence without repainting each frame. This is where can serve as a complement to the Procreate and After Effects workflow. It's an AI video and motion tool built for artistic control, not a one-click generator.
- Use your painting as the reference. Restyle and Ink-and-Paint are reference-driven style transfer tools, so your Procreate oil painting can drive the look instead of a text prompt.
- Direct the motion. Frames-to-Video is keyframe-driven, so you can define start and end frames and shape what happens between them.
- Iterate without losing work. Generations are non-destructive, so you can compare variations and keep the version that holds the brushwork best.
- Prepare for delivery. 4K Upscale helps get output to production resolution, and Remove Background can isolate elements for compositing. Styleframe also offers 2D-to-3D and Turntable for turning a painted subject into something you can rotate.
It exports image sequences and works alongside After Effects and Nuke, so grading, texture overlays, and final compositing stay in the tools you already use. An After Effects plugin is on the way.
Treat any AI-assisted pass as a draft to check against your painted reference. Look at brush direction, edge variation, and texture consistency, and correct in comp where needed.
Common mistakes to avoid
- Too many layers. Isolated layers prevent paint from blending.
- Perfect gradients. Smooth airbrush-like transitions read as digital. Let brush marks show.
- Texture applied as an afterthought. A texture overlay can't rescue a painting that lacks blended color and varied edges.
- Over-detailing. Oil paintings suggest detail with a few accurate marks.
- Ignoring value structure. If the lights and darks don't work in grayscale, no brush will save it.
Quick checklist
- Set the canvas size and create a palette from your reference.
- Sketch an underpainting in a dark neutral.
- Block in large color shapes.
- Paint with the stock oil painting brush, and try the Turpentine brush for texture.
- Duplicate and adjust brush textures as needed.
- Add a subtle canvas texture.
- Vary edges, shift color temperature, and add final highlights.
- Export at delivery resolution, with layers if you plan to animate.
The oil look comes down to how the paint behaves: mixing, covering, and leaving marks. Get those right in Procreate, and the same painting can serve as a reference for animation and compositing downstream.