How to Make an Eyelash Brush in Procreate
StyleFrame Team8 min read
To make an eyelash brush in Procreate, duplicate a basic inking brush, then open Brush Studio and set the Taper so strokes start thick at the root and thin to a point. Add a little Streamline for smooth curves and enable pressure-driven size. For a faster, more repeatable result, build a stamp brush instead: import a small lash shape as the brush Shape, space it widely, and add slight rotation and scatter randomness. Both methods produce a brush you can reuse across character art.
Pick the Right Approach: Stroke Brush or Stamp Brush
Before opening Brush Studio, decide how you want to place lashes.
- Tapered stroke brush: You draw each lash with a flick of the stylus. It gives the most organic variation and works well for illustrated portraits and stylized characters.
- Stamp brush: You tap once to place a curved lash or a small cluster. It is faster and more consistent, which matters when you need many matching lash sets for a blink cycle or an animation turnaround.
Many artists keep both. The stroke brush handles hero close-ups, and the stamp brush handles background characters and quick roughs.
Method 1: Build a Tapered Stroke Brush
Step 1: Duplicate a brush
Don't edit a default brush directly. In the Brush Library, swipe left on a clean inking brush and tap Duplicate. Tap the copy to open Brush Studio. If you ever need the original again, it will be untouched.
Step 2: Set the stroke path
In the Stroke Path settings:
- Lower Spacing so the stroke reads as one continuous line, not a string of dots.
- Raise Streamline to smooth out shaky hand movement. Lashes are short, curved flicks, and streamlining helps the curve look intentional.
- Keep Jitter at zero for now. You can add subtle variation later.
Step 3: Create the taper
This is the step that makes a lash look like a lash. Open the Taper section. Procreate offers Pressure Taper and Touch Taper, and the exact labels can shift slightly between versions, so look for the controls that affect size and tip.
- Set the size taper so the stroke thins along its length, ending at a fine point.
- Adjust the tip or end values so the point is sharp but not vanishing too early.
- Use the start value to control how thick the root is. Lashes should begin fairly solid and finish fine.
- Leave opacity taper low unless you want the lash tips to fade, which can look good for soft, lower lashes.
Test in the preview area at the bottom of Brush Studio. Draw a quick curved flick. If the lash tapers too abruptly, relax the taper. If it ends blunt, push it further.
Step 4: Tune pressure and size
In Apple Pencil settings, let pressure influence size so a firmer press yields a thicker root. In Properties, set the maximum and minimum size to a sensible range. Lashes need to stay thin even at maximum size, so don't set the max too high. A narrow range gives you reliable, consistent lashes at any canvas size.
Step 5: Name, save, and test
Rename the brush, such as "Lash – Tapered," and test it on a blank canvas. Draw at least twenty lashes at different speeds and angles. Fast flicks should give long, elegant lashes, and slow strokes should stay readable. If speed changes the width too much, check the Dynamics settings.
Method 2: Build a Stamp Brush
A stamp brush uses a drawn shape as the brush tip. It can be a single curved lash or a fan of three to five lashes.
Step 1: Draw the lash shape
Create a square canvas, such as 2048 × 2048 px. Draw a single curved lash in black on a white background. It should be thick at the base and come to a fine point. Keep it centered, with enough margin so the shape doesn't clip. For a cluster, draw several lashes fanning slightly from a shared base.
Keep the shape high-contrast, since mid-grays can produce semi-transparent edges.
Step 2: Import it as the brush shape
Duplicate a brush and open Brush Studio. In the Shape section, tap Edit, then import your drawing as the shape source. Confirm and exit.
Step 3: Configure spacing and behavior
- Increase Spacing a lot so each tap places one clean lash rather than a smeared trail.
- Add small Rotation variation so lashes don't all point in the same direction.
- Add a touch of Scatter and Count Jitter if you want a more natural, uneven row.
- Turn off Grain or texture so edges stay crisp.
Use the stroke itself as a guide. Drag along the lash line and the stamps will repeat along the path, with the stroke direction rotating each lash if you enable that behavior.
Step 4: Save and test
Test it along a curved lash line. If the stamps look too uniform, increase rotation and size jitter slightly. If they look messy, dial both back. Subtle variation reads as natural, and heavy variation reads as noise.
Refine Your Eyelash Brush
Once the basic brush works, a few adjustments make it production-ready:
- Make a lower-lash variant. Duplicate the brush, reduce the max size, and increase taper so the lashes come out finer and sparser.
- Make a hard and a soft version. A hard-edged brush suits flat or cel-style character art, and a slightly softened one suits painterly work.
- Set a sensible default size. Lashes sized wrong at the start waste time. Match the default to your usual canvas resolution.
- Check at 100% zoom. Taper problems that are invisible when zoomed out show up quickly at full resolution.
Also keep your brush set organized. Create a custom brush set called "Face Details" and keep the eyelash brushes there next to your brow, pore, and hair brushes. Procreate brushes can be exported as .brush files, so back them up and share them with teammates for consistent results.
Drawing Better Lashes With the Brush
A good brush won't fix poor placement. A few habits matter more than any slider:
- Start lashes slightly inside the lid line so they look rooted, not stuck on.
- Keep inner-corner lashes shorter and straighter, and make outer-corner lashes longer and more curved.
- Draw upper lashes in two or three overlapping passes, varying length and angle.
- Put lashes on their own layer so you can adjust, erase, or recolor them without touching the eye.
- Add a darker tone at the lash roots and a few subtle highlights at the tips for depth.
Using Procreate Lashes in a Motion Pipeline
If you're a motion designer, the brush is only half the job. Lashes often need to animate with blinks, head turns, or expression changes, so structure the artwork for it.
Separate layers. Keep upper lashes, lower lashes, eyelid, eyeball, and highlights on separate layers. Name them clearly. Keep the layers intact when you export so the artwork is ready for puppet tools, parenting, or rigs in your animation software.
Paint beyond the visible edge. If lashes will move or be masked by an eyelid, give yourself extra artwork past the lash line so edges don't reveal gaps when you animate.
Work large. Draw at a higher resolution than your delivery size. Fine lash tips soften quickly when scaled up, and a 4K comp will expose any low-resolution artwork.
Plan the blink. For a simple blink, draw the lash set open, half-closed, and closed on separate layers. The stamp brush helps here because you can match lash count and spacing between states.
Where Styleframe Fits
Procreate is where you design the look, and the next challenge is carrying that look through motion without redrawing every frame. is an AI video and motion tool built for artistic control, and it can pick up from your hand-drawn lash work.
- Restyle and Ink-and-Paint: Use your Procreate frame as a style reference so line quality, including lash weight and taper, guides how other footage or frames are rendered. This is reference-driven style transfer, not a one-click black box.
- Frames-to-Video: Set keyframes, such as eyes open and eyes closed, and have the in-between motion generated from your own artwork. You control the start and end poses.
- Remove Background: Isolate a character from footage or a plate before you composite your illustrated details.
- 4K Upscale: Bring finished sequences to production-ready 4K, which matters for fine details like lashes.
- 2D-to-3D and Turntable: Explore a character from other angles when you need reference for a rotating head.
Every generation is driven by your reference images, clips, and keyframes, and iteration is non-destructive, so you can try variations without losing earlier versions. You keep your compositing workflow and use Styleframe for the generative step.
Common Problems and Fixes
Lashes look like straight lines. Add more Streamline and draw with a quick, curved flick. A curve built into the motion matters more than any setting.
The taper is too blunt. Increase the size taper at the tip and check that the minimum size isn't preventing a fine point.
Stamps look repetitive. Add rotation and scatter jitter, and vary your stamp size manually as you place them.
Edges look jagged. Work on a larger canvas, and check that your stamp shape has clean, anti-aliased edges.
The brush behaves differently on another device. Pressure curves vary with the stylus and device. Adjust the Pressure curve in Procreate's settings rather than rebuilding the brush.
Summary
A custom eyelash brush in Procreate comes down to two choices: a tapered stroke brush for organic, hand-drawn lashes, or a stamp brush for speed and consistency. Duplicate a base brush, set a strong taper, control spacing and pressure, and test at full resolution. Keep lashes on separate layers, work large, and export layered files so the artwork carries cleanly into your animation software. If you then need that hand-drawn look to carry through moving footage, tools like Styleframe can extend your artwork while you stay in control of the keyframes and references.