How to Make an Emoji Brush on Procreate
StyleFrame Team9 min read
To make an emoji brush in Procreate, prepare your emoji as a high-contrast image, open Brush Studio from a new brush, and import the image as the brush's Shape source. Then set spacing, scatter, rotation, and size jitter in the stroke settings so each tap places one clean emoji or a loose cluster. Save the brush to your own set and test it on a transparent canvas before using it in a project.
Because brush shapes are read as grayscale, the biggest decision is whether you want a single-color stamp or a multicolor result. That decision affects how you prepare the artwork, so start there.
What to Prepare Before You Open Brush Studio
A brush is only as good as its source image. Spend a few minutes on prep and you will avoid most of the usual problems, such as muddy edges, off-center stamps, and brushes that paint inverted.
- A square canvas for the emoji. Centered artwork with some padding around it keeps the stamp from clipping and makes rotation behave predictably.
- A high-resolution source. Brushes are scaled up and down constantly. A small, soft source gets blurry at large sizes.
- A grayscale version of the design. Decide which parts of the emoji should paint and which should stay empty. Strong contrast between those regions gives you crisp edges.
- A clear idea of the use case. A one-tap stamp, a scattered confetti-style spray, and a line of repeated emoji along a stroke each need different settings.
If your starting point is a system emoji, a screenshot, or a drawing of your own, the same logic applies. Simplify it into shapes that read well at small sizes. Fine interior detail often disappears in a brush stamp, so strip it back to the silhouette and a few key features such as eyes and mouth.
Step 1: Build the Shape Source
Create your emoji artwork on a square canvas, then convert it to black and white. There are two practical routes.
Route A: Draw or trace it directly. Place the emoji on a reference layer, trace the major forms on a new layer, and fill them in black and white. This gives you the cleanest result and full control over which details survive.
Route B: Desaturate and threshold. Bring in the emoji image, desaturate it, and push the contrast with curves or a similar adjustment until the features separate clearly. This is faster, but it can leave noise in the edges, so check it at a zoomed-in view.
Keep the background of the source flat. A stray gray gradient will show up in the brush as a soft haze around each stamp. When you are happy, export the artwork or copy it so you can import it into the brush editor.
Step 2: Create a New Brush and Import the Shape
- Open the brush library and create a new brush using the add button.
- In Brush Studio, go to the Shape settings.
- Choose the option to edit the shape, then import your source image.
- Check the preview. If the emoji appears inverted, with the face painted where it should be empty or the reverse, use the invert option or flip your black and white regions.
- Confirm the shape and look at the stroke preview at the top of the panel.
Interface labels shift between versions, so if a setting is not where you expect, look for the shape source editor within the same panel. The principle is the same: you are telling the brush what footprint to stamp.
A note on color
Because shape sources are interpreted in grayscale, a brush made this way usually paints in your currently selected color. That works well for silhouette-style emoji, sticker packs in a single tone, or brushes you intend to recolor on the fly. If you need true multicolor emoji, you have a few options:
- Build the emoji as separate brushes per color region and stack them on different layers.
- Keep full-color emoji as a library of artwork you duplicate, scale, and place as layers rather than as a brush.
- Use a brush for placement and texture, then color the stamps afterward with fill and clipping layers.
For production work where fidelity matters, the layer-based approach often beats a brush. A brush wins when you want fast, varied, hand-placed repetition.
Step 3: Tune the Stroke So It Behaves Like an Emoji Brush
Importing the shape is the easy part. The settings that follow determine whether the brush feels like a stamp tool or just a messy line.
Spacing
Spacing controls how far apart each stamp lands along a stroke. For a tap-to-place stamp, raise spacing high enough that emojis do not overlap, so a drag produces a tidy row. For a dense trail, lower it so they overlap into a pattern. Test with a quick horizontal drag and a tight curve to see how each behaves.
Scatter and jitter
Use scatter to push stamps off the stroke path for a spray or confetti effect. Add a small amount of size jitter and rotation jitter if you want a hand-placed, organic look. Keep these at zero if you need the brush to place clean, uniform emoji. Subtle variation usually looks better than extreme variation, especially if the final piece will be animated and every placement will be scrutinized.
Rotation
Decide whether the emoji should always stay upright or follow the direction of the stroke. Upright emoji read as stickers. Stroke-following rotation is better for decorative borders and trails. Random rotation adds energy but can make faces look chaotic.
Pressure and size
Map pressure to size if you want expressive stamping, where a light touch gives small emoji and a firm press gives large ones. If you want consistency, reduce or remove the pressure response and set a sensible minimum and maximum size in the brush's properties.
Stabilization and smoothing
If you plan to draw lines of emoji, add some stabilization so the path stays smooth. For single taps, you can leave it minimal.
Step 4: Name, Organize, and Test
Give the brush a descriptive name and place it in a custom set so it does not get lost among the defaults. Use a transparent or neutral canvas and test:
- A single tap at small, medium, and large sizes
- A short straight stroke
- A curved stroke
- A quick scribble to check overlap behavior
Look at the edges at 100% and zoomed in. If you see fringing or a soft halo, return to the source and clean up the contrast. If the stamps feel too cramped, raise spacing. If the brush feels unpredictable, reduce jitter one setting at a time rather than changing everything at once.
When you are satisfied, you can share the brush file or keep it in your library for later projects. If you are building a family of emoji brushes, duplicate the finished one and swap the shape source. That keeps your spacing and jitter settings consistent across the set.
Common Problems and Quick Fixes
- The emoji paints as a blob. The source has too little contrast or too much detail. Simplify it and increase the separation between black and white regions.
- The stamp looks inverted. Flip the source or use the invert control in the shape editor.
- The stamp is cut off. Add padding around the artwork in the source canvas.
- Edges look soft at large sizes. Use a higher-resolution source image.
- Stamps overlap unexpectedly. Increase spacing, and check that size jitter is not pushing some stamps larger than intended.
- Brush does not feel like the preview. Check that pressure and tilt dynamics are not overriding your size settings.
Bringing Emoji Brush Artwork Into a Motion Pipeline
For motion designers, an emoji brush is rarely the end product. It is a fast way to generate hand-placed elements for reactions, lower thirds, stickers, social cutdowns, or textured backgrounds. A few habits make that handoff smooth.
Paint on separate layers. Put each group of stamps on its own layer so you can animate position, scale, and opacity independently once you are in After Effects or another compositor.
Work on a transparent background. Export in a format that supports transparency so the elements drop straight onto a timeline without keying.
Use frame-by-frame animation when you want hand-made motion. If you animate inside the drawing app, export the result as an image sequence and bring it into your compositing or editing software as a footage item. Image sequences keep quality predictable and fit existing review and compositing steps.
Keep a clean master. Save the original layered file so you can revise the placement later without repainting.
Extending Emoji Artwork With Styleframe
Once you have a set of painted emoji frames or a stamped composition, you may want to push them further without redrawing everything. is an AI video and motion tool that can sit beside your drawing app and compositor.
A few practical uses to explore for emoji-based artwork:
- Generating motion between frames. Use your painted start and end frames as a guide instead of drawing every in-between by hand.
- Carrying a consistent look. Use a reference image to keep a specific line quality or paint texture across your emoji elements and animation.
- Isolating elements. Separate painted or generated elements so they are ready to layer in a composite.
- Exploring dimension. Look at a flat emoji design as a dimensional object from multiple angles.
- Upscaling. Bring finished output to the resolution your project needs.
Check the tool's current feature set to confirm what is available for your workflow. The goal is to extend your hand-made brushwork, not replace it.
Final Checklist
Before you rely on your new brush for client work, confirm that:
- The source is high-resolution, centered, and high-contrast.
- The shape is not inverted and has no stray gray haze.
- Spacing, scatter, and rotation match the way you intend to use it.
- Size and pressure behave predictably.
- The brush is named and saved in your own set.
- You have tested it on a transparent canvas and exported a sample to your compositor.
Once those are in place, an emoji brush becomes a reusable tool. You can adjust a handful of settings to get anything from tidy sticker stamps to loose confetti, and the artwork moves cleanly into your motion workflow.