How to Make an Arch in Procreate
StyleFrame Team8 min read
To make an arch in Procreate, draw a circle with QuickShape, hold until it snaps into a perfect shape, then erase the bottom half. For a solid architectural arch, combine a rectangle and an ellipse in Selection mode and fill the result. Procreate has no built-in text-on-path or arch-text function, so arched lettering takes the Warp tool (with Advanced Mesh), Liquify, or a vector app such as Illustrator.
"Arch" can mean a graphic shape, such as a doorway, rainbow, or frame, or text curved into an arch. The steps below cover both, then show how to carry an arch from Procreate into a motion pipeline.
Decide which kind of arch you need
The method depends on the result:
- A line arch (rainbow, decorative frame, text guide): use QuickShape on an ellipse and trim it.
- A solid arch (doorway, window, badge, mask): use Selection mode to combine shapes, then fill.
- A symmetrical, ornate arch (repeating borders, boho layouts): use the Symmetry guide.
- Arched text: use a guide arc plus Warp or Liquify, or move the type into a vector tool.
Draw a line arch with QuickShape
This is the fastest way to a clean curve, and it works well for text guides and linework.
- Create a new layer and pick a monoline brush. A technical pen or any hard-edged brush gives a smooth stroke.
- Draw a rough circle or ellipse, and keep the pen on the canvas at the end of the stroke.
- Hold until the shape snaps. Procreate converts your wobbly loop into a regular ellipse. Tapping the canvas with another finger while holding constrains it to a perfect circle.
- Use the Edit Shape button that appears at the top to adjust the nodes if the proportions are off.
- Open the Transform tool to reposition and scale the shape, then erase the bottom half with the Eraser (or select and delete it) to leave an arch.
If you need a precise arch height or width, turn on the Drawing Guide first (Actions > Canvas > Drawing Guide > Edit Drawing Guide). Increase the grid size so it is easier to see, then use the grid cells to center the arch and keep both sides symmetrical.
Build a solid architectural arch with Selection
For a doorway or window, you want a flat-bottomed shape with a rounded top. A rectangle plus a semicircle gets you there.
- Create a new layer.
- Tap the Selection tool and choose Rectangle. Drag out the lower body of the arch.
- Switch the mode to Add, choose Ellipse, and drag a circle whose diameter matches the rectangle's width. Position it so its center sits on the rectangle's top edge.
- The combined selection now has a rounded top. The lower half of the circle overlaps the rectangle, so it adds nothing.
- Fill the selection by dragging a color from the Colors panel into it (ColorDrop), or by tapping the layer and choosing Fill Layer.
To make an arched frame with a cutout, repeat the process on a second layer with a smaller arch and delete it from the first. Alternatively, use the Subtract mode on a nested selection. Keep each arch on its own layer so you can recolor, resize, or mask them later.
Keep edges crisp
- Turn on Snapping and Magnetics in the Transform tool's bottom menu so shapes align to the canvas center and to each other.
- Work at a high canvas resolution if the arch is going into video. Scaling a raster arch up later softens edges.
- Leave margins around the arch. If it is later animated, any rotation or scale change needs room.
Use the Symmetry guide for decorative arches
When you are drawing a hand-built arch, such as a gothic window, a floral arch, or a bordered doorway, the Symmetry guide saves a lot of effort.
- Go to Actions > Canvas > Drawing Guide > Edit Drawing Guide > Symmetry.
- Set the source to Vertical and turn on Assisted Drawing on the layer you are working on.
- Draw one side. Procreate mirrors your strokes across the center line.
You can combine this with a QuickShape arch layer underneath, using it as a reference and tracing ornamental detail on top. The result is symmetrical without having to mirror and nudge duplicate layers by hand.
How to arch text in Procreate
Procreate's text tool is relatively new and has no arch or warp option, so there are several workarounds. Each trades editability for speed, so pick based on how final the text is.
Prepare the text first
- Tap Actions > Add > Add Text.
- Double-tap the text to edit it. Drag the side handles so the word sits on one line instead of stacking in a column.
- Choose a font. Heavier or bolder styles are easier to bend without breaking apart.
- Open the Design options and increase Kerning. Extra spacing between letters keeps them from overlapping when they bend.
- Duplicate the text layer before you do anything else. Warp and Liquify rasterize the text, so you can no longer edit the wording afterward.
Method 1: Warp with Advanced Mesh
This gives the most predictable curve, and it is the one to use when the text must follow your arch guide.
- Draw an arch guide on a layer beneath the text (see above) and center your text on it.
- Select the text layer, tap Transform, choose Warp, and turn on Advanced Mesh for more control points.
- Drag the mesh points so the baseline follows the arc. Keep the points symmetrical on each side. Any part of the mesh can be pulled, not just the nodes.
- Work gradually. Small adjustments across the mesh produce a smoother curve than large pulls on a few points.
Method 2: Liquify Push
Liquify is quick, but it is harder to judge how much the text will stretch.
- With the text layer selected, open Adjustments > Liquify.
- Choose Push and set a brush size that is large enough to move whole letters but small enough not to disturb their neighbors.
- Stroke in the direction you want the text to move, working from the center outward.
Turn on the brush cursor in Preferences so you can see the brush footprint.
Method 3: Place letters manually
If you want complete control and no distortion, convert the text to individual letters. Type each letter as its own text layer, or rasterize and cut the letters apart. Then rotate and position each one along the arch guide. It is slow, but the letters keep their proportions, and kerning can be tuned by eye.
Method 4: Arch in a vector app
For client work that requires editable, resolution-independent text, build the arch in Illustrator, where text can be warped without being rasterized. Affinity Designer lacks tools for warping text so that it stays live text, though it works well for layout. Some artists use Procreate for the illustration and a vector app for the layout. A practical approach is to lay out the text there, import it to Procreate as a guide, paint the artwork, and re-import the final art into the layout file.
Troubleshooting common arch problems
- The arch snaps to the wrong shape: keep the pen down until it settles. If it keeps misreading, draw the stroke more slowly and make the loop more circular.
- The two sides don't match: use the Drawing Guide grid or Symmetry rather than relying on eye alone.
- Warped text looks jagged: the text was likely scaled up after rasterizing. Start with a larger text size and a high-resolution canvas.
- Letters collide at the inner edge of the curve: increase kerning before warping. On an arch, inner letters compress and outer letters spread.
- You can't edit the wording anymore: that is expected after Warp or Liquify. Keep the duplicated original, hidden, as a backup.
From Procreate arch to motion
Arches are common in title cards, lower thirds, and illustrated scenes. Getting one from an iPad into an animation pipeline takes a few decisions.
Export for compositing. Hide the background and export a PNG with transparency, or export layers as a PSD so the arch, text, and decoration stay separable in After Effects. Keep arch, text, and detail on separate layers if you plan to move them independently.
Decide whether to rebuild. If the arch is a clean geometric shape, rebuilding it as a shape layer in After Effects is often better, since Trim Paths and shape operators give you vector-sharp animation. Keep the Procreate version for the painted, textured, or hand-lettered work that would be tedious to recreate.
Animate the painted look without losing it. This is where may fit. It is an AI video and motion tool, and you can bring your Procreate arch in as reference artwork for animation. Check its current documentation for supported keyframe, restyle, upscaling, and export options, as well as any planned integrations, before building a pipeline around it. Color, grading, and final assembly can still happen in your existing After Effects or Nuke comp.
Quick reference
Start with the simplest method that meets the deliverable, keep your layers separate, and duplicate any text before warping. That keeps the arch editable in Procreate and ready for After Effects or Nuke.