How to Make a Tie Dye Pattern in Procreate
StyleFrame Team7 min read
To make a tie dye pattern in Procreate, fill a square canvas with four to five saturated color blocks on a single layer, then use Liquify's Twirl tool at the center to pull them into a spiral. Smooth the result with a light blur, add fabric-style texture and white resist lines on separate layers, and export a high-resolution PNG. For motion work, the exported file becomes a plate you can animate in After Effects or Blender.
What You Need Before You Start
The method needs no special brushes. Procreate's built-in tools are enough, and third-party tie dye or watercolor brush packs only add texture.
- Canvas: Start square if the pattern will end up in a video frame or a texture map. The maximum size and layer count depend on your iPad's memory, so check what Procreate shows for your device when you create the canvas.
- Color profile: If the file is going into a color-managed comp, choose the profile when you create the canvas, because it is awkward to change later.
- Palette: Pick four or five colors with clear hue separation, such as magenta, yellow, teal, violet, and a lime accent. Tie dye depends on adjacent hues blending into new ones, so avoid colors that muddy each other (orange next to teal tends to turn gray).
Step 1: Block In the Color Zones
- Create a new layer and name it "Base."
- Use the Rectangle selection (Add mode) or a hard-edged brush to fill the canvas with large color zones. Quadrants work well for a classic center-spiral look. Wedges radiating from the center give a tighter, more traditional spiral.
- Keep the edges between zones crisp. Liquify smears whatever it finds, and clean color boundaries make cleaner swirls.
- Duplicate the layer and hide the original as a backup. You will be distorting destructively, so you want a clean source to return to.
If you want accuracy, turn on the Drawing Guide with a 2D grid and enable snapping. For organic dye work, though, slightly uneven blocks usually look more convincing than perfect ones.
Step 2: Twirl the Colors with Liquify
This step creates the tie dye look.
- Select the duplicated layer, tap Adjustments (the magic wand icon), and choose Liquify.
- Pick Twirl Right (or Twirl Left for the opposite direction).
- Set a large brush size, around half the canvas width. Keep pressure moderate and distortion fairly high. Momentum, if you enable it, helps create a softer, flowing feel.
- Place the Apple Pencil at the center of the canvas and hold it down. The color blocks wind into a spiral for as long as you hold.
- Reduce the brush size and add secondary twirls off-center. Real tie dye has several pinch points, so a single perfect spiral looks artificial.
- Use Push to nudge stray bands and Pinch to tighten the center.
Stop before the colors turn to soup. If the middle collapses into a blur, undo a few steps and hold for less time. Several short twirls give you more control than one long one.
Making Different Tie Dye Styles
- Spiral: One strong central twirl, followed by smaller corrections.
- Crumple: Several medium twirls at random points, alternating left and right.
- Bullseye: Start with concentric color rings instead of quadrants, then pinch the center slightly.
- Stripe fold: Start with horizontal bands and apply a few opposing twirls along the edges.
Step 3: Add Dye Bleed and Soft Edges
Digital swirls often look too clean. Real dye soaks into fabric and bleeds along thread lines.
- Duplicate the twirled layer.
- On the top copy, apply Gaussian Blur at a small amount, using Layer mode so it affects the whole layer.
- Set the blurred layer to a blend mode such as Overlay or Soft Light at reduced opacity, or erase through it selectively with a soft eraser so some boundaries stay crisp.
- Use the Smudge tool with a textured brush along color borders to create feathered transitions.
The goal is a mix of sharp and soft edges. Wherever two colors meet, the transition should vary in width.
Step 4: Add Fabric Texture and Resist Lines
Two additional layers make the pattern read as dyed cloth rather than a gradient.
Fabric grain
- Create a new layer above the artwork.
- Fill it with a neutral gray, or use a canvas, linen, or paper texture brush at low opacity.
- Set it to Multiply or Overlay and reduce opacity until the weave is just visible.
- Apply Noise from the Adjustments menu for a fine grain if you do not have a texture brush.
Resist lines
- Add another layer and set it to Soft Light or Overlay.
- With a dry brush or a chalky texture brush in off-white, paint irregular lines that follow the spiral. They imitate the places where string or folds kept dye out of the cloth.
- Vary the spacing and pressure. Uniform lines look mechanical.
Keep grain, resist lines, and base color on separate layers. This matters when you hand off the file, since a compositor can then adjust each independently.
Step 5: Color Adjustments
Before exporting, check the whole image at a zoomed-out size.
- Use Hue, Saturation, Brightness on the base layer to shift the palette without repainting.
- Use Curves to deepen shadows or lift highlights.
- Try Color Balance to unify the overall temperature if one color dominates.
Tie dye should feel vivid but not neon, so pull saturation back slightly if the colors look like they clip on a video monitor.
Step 6: Turn It Into a Repeating Pattern (Optional)
A twirl composition does not tile by default, because its center and edges are not designed to match. There are two practical options.
- Mirror approach: Duplicate the artwork, flip it horizontally and vertically with Transform and snapping on, and arrange four copies into a larger kaleidoscopic tile. The seams will match, but the pattern becomes symmetrical.
- Offset approach: Cut the canvas into quadrants, swap their positions so the original edges meet in the middle, and paint across the seam to blend them. Move back to the original arrangement to check that the edges align.
Test the tile by placing several copies side by side. If you plan to use it as a repeating texture in 3D or in After Effects, this check is worth doing before export.
Step 7: Export for Motion Work
- Export PNG for a flattened, high-quality plate, or PSD to keep layers.
- If you bring a layered file into your compositing app, check that blend modes look right after import, since not all of them translate perfectly.
- Name layers clearly (Base, Bleed, Grain, Resist) before export.
Using the Pattern in After Effects, Blender, and Cinema 4D
Once the artwork is out of Procreate, it is ordinary footage-ready material.
In After Effects
- Animate the Twirl effect's angle over time for a slowly rotating spiral.
- Add Turbulent Displace with an animated Evolution value to make the dye appear to flow.
- Drive displacement with a Fractal Noise layer used as a map for more organic movement.
- Keyframe a Hue/Saturation adjustment to cycle the palette.
- Use Mesh Warp for hand-directed distortions at specific moments.
In Blender or Cinema 4D
- Apply the PNG as a base color texture on cloth, T-shirt, or product geometry.
- Use the grain layer as a roughness or bump input to make fabric catch light realistically.
- If the pattern is seamless, set the texture to repeat and scale it in UV space.
In Premiere Pro
- Use it as a background plate or transition element, and animate scale and position, though more complex distortion is better handled in After Effects.
Troubleshooting Common Problems
- Colors look muddy: Reduce the number of hues, or separate complementary colors with a lighter buffer color such as white or pale yellow.
- Spiral looks too perfect: Add off-center twirls and uneven resist lines.
- Banding in gradients: Add a small amount of noise before export, especially if the plate is headed for 8-bit delivery.
- Pattern looks flat in motion: Add texture variation and subtle displacement in After Effects. Static dye art often needs extra micro-movement to feel alive.
- Lag in Liquify: Work at a smaller canvas size, finish the twirling, then rebuild at a higher resolution or upscale the result.
Quick Workflow Checklist
- Create a square canvas and a 4–5 color palette.
- Block in color zones on one layer and duplicate it.
- Use Liquify Twirl, Push, and Pinch to build the swirl.
- Blur and smudge edges to simulate dye bleed.
- Add grain and resist-line layers in Multiply or Overlay.
- Adjust hue, curves, and balance.
- Test tiling if needed.
- Export PNG or layered PSD and bring it into your motion pipeline.
With a clean source file and organized layers, a tie dye pattern built in Procreate becomes a flexible asset for backgrounds, textures, and animated graphics.