How to Make a Stitch Brush in Procreate
StyleFrame Team8 min read
To make a stitch brush in Procreate, draw a small rounded rectangle or capsule on a square canvas, copy it, and import it as the Shape source of a duplicated Monoline brush. Then raise Spacing in Stroke Path so the shapes separate into individual stitches, set Scatter to zero, and switch the shape to follow the stroke direction. From there you tune size, stabilization, and rendering until the line reads like thread. The same method can be adapted to produce running, cross, blanket, and chevron stitches.
What You Need Before You Start
You need Procreate on an iPad and an Apple Pencil or other stylus. A finger works for drawing the base shape, but a pencil gives you cleaner pressure behavior when you test the brush.
Decide how you'll use the brush before you build it. If the stitches are for print or surface patterns, a high-resolution canvas matters. If they're for motion work, think about the output: a transparent PNG or PSD of stitched linework is what you'll want to bring into After Effects, so keep your strokes on separate layers from the start.
Step 1: Create a Square Canvas
Start with a square canvas. Some tutorials use a large one, such as 12 × 12 inches at 300 DPI, which is fine for the shape source.
Use a black or transparent background. What matters is that your final shape source is clear: Procreate reads white as opaque and black as transparent, with grays giving partial transparency. You'll flip the shape later if needed.
Step 2: Draw the Stitch Shape
A single stitch is just a small, slightly rounded rectangle or a capsule (sometimes called a "cigar" shape). Draw it in white on black, or in black on white if you plan to invert it.
- Keep the shape centered. Use Move and Transform with snapping on, and look for the gold guides that confirm vertical and horizontal centering.
- Leave padding around the shape. If it touches the canvas edge, the stitch will clip or look cramped when spacing changes.
- Make it horizontal, which matters once you set the shape to follow the path.
Rounded ends look more like thread than hard-cornered rectangles. For a more handmade feel, nudge the edges so the shape isn't mathematically perfect.
Step 3: Copy the Shape
With the shape layer active, copy it. You can use the three-finger swipe down gesture and tap Copy, or open the layer menu and choose Copy. Another route is the Actions (wrench) menu, then Add, then Copy Canvas. Copy Canvas grabs everything visible, so use it when the shape is the only thing on the canvas.
Step 4: Duplicate the Monoline Brush
Open the Brush Library, find Monoline in the Calligraphy set, and swipe left to Duplicate. Always work on a duplicate so you never overwrite the original. The copy appears as "Monoline 1," which you can rename later.
Monoline is a good base because it gives you a clean starting point, and you add behavior only where you want it.
Step 5: Import the Shape in Brush Studio
Tap the duplicated brush to open Brush Studio.
- Go to Shape.
- Under Shape Source, tap Edit.
- Tap Import, then choose Paste.
- If the stitch appears with the wrong tonality, use a two-finger tap to invert it.
- Tap Done, and tap Done again to leave the shape editor.
If your stitch looks like a hollow outline or a negative, the inversion is the fix. Remember the rule: white areas of the source paint with your selected color, black areas are invisible.
Step 6: Set Spacing and Scatter for the Stitch Rhythm
This step turns a smear of overlapping rectangles into discrete stitches.
- Open Stroke Path and increase Spacing. Pushing it near the maximum separates the shapes completely, which suits a classic running stitch. For a tighter, more continuous thread look, a lower value around the high double digits can work better. Test and adjust.
- Return to Shape and set Scatter to zero. Scatter rotates shapes randomly, which is why stitches can end up pointing in the wrong direction.
- In the same Shape panel, set Rotation so the stitch follows the stroke. This keeps each dash aligned with the curve you draw.
If the stitches look too regular, add a small amount of Jitter under Stroke Path. A little goes a long way, and it's often the difference between "digital dashed line" and "hand-sewn."
Step 7: Tune Size and Stabilization
Open Properties and adjust the Maximum Size and Minimum Size. A larger maximum gives you room to scale the stitch up for big shapes, while a low minimum lets you shrink it for fine detail. Treat these as flexibility ranges rather than a fixed look, and set them to suit your canvas size.
Then check Stabilization. Heavy streamline can smooth your curves so much that stitches bunch or drift off the path you drew. Lower it if the line feels laggy or inaccurate.
If the stitch looks too thick, you can also squish the shape inside the Shape editor, narrowing it with the transform handles, rather than just shrinking the brush. This keeps the length proportions of the stitch while thinning the thread.
Step 8: Add Dimension with Rendering and Texture
A flat capsule reads as a dash. To make it read as thread, look at Rendering and Shape/Grain options:
- Try a glaze-style rendering mode for a softer, layered look.
- Add a subtle grain texture to suggest fiber.
- Add a second brush layer with a slightly offset darker color for a shadow.
- Duplicate the layer in your canvas, lock alpha, and fill one copy with a darker tone to fake depth under the stitch.
Draw some test lines, curves, and a closed circle. Tight curves reveal whether the rotation setting is working, and closed shapes reveal how stitches meet at the join.
Variations: Cross Stitch, Blanket Stitch, and More
Once the basic pipeline is clear, you can create other stitch types by changing only the shape source and spacing:
- Running stitch: a single capsule with wide spacing.
- Cross stitch: two crossed capsules in one shape source, rotated and spaced evenly.
- Blanket stitch: an "L" or comb shape with its long edge perpendicular to the path.
- Chevron or fern stitch: a V or branching shape, with rotation following the stroke.
- Lazy daisy: a teardrop shape at larger spacing, usually applied as individual stamps.
Procreate brushes can be exported and shared, so you can build a small stitch library and reuse it across projects. If you download third-party brush sets, check their license terms before using them in commercial work.
Troubleshooting Common Problems
- Stitches are invisible: the shape is probably inverted. Two-finger tap in the shape editor to flip it.
- Stitches point in random directions: Scatter is not zero, or rotation isn't set to follow the stroke.
- Stitches overlap into a solid line: increase Spacing.
- Stitches look jagged: build the shape source on a larger canvas, and make sure the shape has soft, clean edges.
- Brush won't import or open: older brush files sometimes fail on newer Procreate versions. Rebuild the brush from scratch using the steps above.
Taking Stitch Art Into Motion Work
Stitch brushes are mostly used for illustration and pattern design, but they translate well into animation, title design, and mixed-media motion graphics. A few practical ways to use your stitched artwork in a motion pipeline:
Export clean layers. Save stitched elements as transparent PNGs or a layered PSD, then import them into After Effects as footage or a composition. Keeping stitches on their own layer lets you add shadows, texture overlays, or color adjustments non-destructively.
Reveal the stitches over time. In After Effects, an animated matte or a wipe along the path will make stitching appear to draw on. Use the Procreate version when you need a hand-made irregularity that a perfectly regular vector dash can't provide.
Use frame-by-frame variation. If you want a boiling, hand-stitched look, draw two or three alternate versions of the same stitched line and cycle them at a low frame rate.
Where Styleframe Fits
If you want to carry a stitched look beyond hand-drawn frames, is an AI video and motion tool you can explore. You can use your Procreate stitch artwork as a reference image so footage or animation picks up the embroidered texture and linework you designed. You keep the comp in your existing compositing workflow, and Styleframe handles the stylized generation step.
Quick Checklist
- Square canvas, white stitch shape on black, centered with padding.
- Copy the shape.
- Duplicate Monoline from Calligraphy.
- Brush Studio → Shape → Edit → Import → Paste (invert if needed).
- Stroke Path: raise Spacing; Shape: Scatter to zero, rotation follows stroke.
- Adjust Properties size range and lower Stabilization if needed.
- Test on curves, then refine rendering and texture.
- Export transparent layers for use in After Effects or other tools.
Once you understand that a Procreate brush is just a shape source plus rules for spacing, rotation, and randomness, building any stitch variant is quick. The art is in the small imperfections: slightly uneven spacing, a hint of jitter, and a shape that isn't perfectly symmetrical.