How to Make a Stencil on Procreate
StyleFrame Team8 min read
To make a stencil in Procreate, import your image, desaturate it, duplicate the layer, set the top copy to Color Dodge, invert it, and add Gaussian Blur until clean outlines appear. Then tighten the result with Curves and export it as a PNG. For a bolder two-tone stencil, push contrast with Curves or Hard Mix instead. For a reusable digital stencil you can paint through, build a shape layer and clip your paint layers to it.
What "Stencil" Means in Procreate
The word covers three different jobs, and each uses different tools:
- Outline stencil: a line-only version of a photo or drawing, used for tattoo transfers, hand-cut paper stencils, or tracing.
- Two-tone (threshold) stencil: solid black and white shapes, used for spray stencils, screen-print positives, vinyl cutting, or graphic mattes.
- Digital paint stencil: a shape that confines your brush strokes, built with clipping masks, Alpha Lock, or selections.
Pick the method that matches the end use, because the export settings and cleanup differ.
Set Up the Canvas First
Resolution decides whether your stencil holds up when it's printed or scaled in a composite.
- Create a canvas at the final output size. For print stencils, 300 DPI at the real-world dimensions is a sensible default. For video work, match your comp resolution or go larger so you can scale without softness.
- Name your layers from the start. You'll be duplicating and merging a lot.
- Import your source through Actions (wrench) > Add > Insert a photo, then scale it with the Transform tool.
Use a high-contrast source with a clear subject. Stencils amplify noise, so a flat, muddy photo gives you a muddy stencil.
Method 1: Outline Stencil From a Photo or Drawing
This is the fastest route to a line-based stencil, and it works on photos, 3D renders, or painted frames.
Step 1: Desaturate the Source
Select the image layer, then tap Adjustments > Hue, Saturation, Brightness and drag Saturation to zero. Color information only gets in the way of line detection.
Step 2: Duplicate the Layer
Swipe left on the layer and tap Duplicate. You now have two identical grayscale layers.
Step 3: Invert the Top Copy
Select the top layer and choose Adjustments > Invert. It should look like a photographic negative.
Step 4: Set the Blend Mode to Color Dodge
Tap the N next to the top layer and select Color Dodge. The canvas will turn almost entirely white, which is expected.
Step 5: Blur the Top Layer
Choose Adjustments > Gaussian Blur, set it to Layer, and slide across the screen. Lines emerge as the blur increases. Lower values give faint, fine detail, while higher values give heavier, darker lines. Stop where the key forms read clearly without filling in the shadows.
Step 6: Merge and Tighten
Pinch the two layers together to merge them. Then open Adjustments > Curves and pull the black point and white point inward. This turns weak gray lines into confident black ones and cleans paper-white areas.
If the lines are still too light, undo the merge and increase the blur slightly before merging again. Fixing it at the source is cleaner than fighting it with Curves.
Method 2: High-Contrast Two-Tone Stencil
Use this when you need solid shapes instead of lines, such as a spray-paint stencil or a graphic matte.
- Desaturate the image as before.
- Apply a light Gaussian Blur (a small percentage) to knock out grain that would create speckle.
- Open Curves and create a steep S-curve, pulling the shadows down and the highlights up so midtones collapse toward black or white.
- For a harder edge, add a patterned layer beneath and set your artwork layer to Hard Mix. This gives a threshold-style result. Because it reacts to what's underneath, changing the layer below changes the look.
- For a printed-dot texture, try a halftone brush pattern instead. Halftone patterns can give a range of tonal values even when the output is purely black and white.
Check the result at 100% zoom. Thin bridges, small floating islands, and tiny gaps are the usual problems. If you're physically cutting the stencil, floating islands will fall out, so reconnect them with a small brush stroke.
Method 3: A Digital Stencil for Painting
Sometimes you want a stencil as a working tool rather than an output. Procreate gives you a few ways to build one.
Clipping Mask
- Draw or fill your shape on its own layer, such as a logo, letterform, or silhouette.
- Add a new layer above it, tap the layer, and choose Clipping Mask.
- Paint on the clipped layer. Strokes appear only where the shape beneath has pixels.
You can stack several clipped layers for shading, texture, and highlights, and the base shape stays intact.
Alpha Lock
Swipe two fingers right on a layer to enable Alpha Lock. Painting is then limited to existing pixels. It's quicker than a clipping mask but less flexible, since the paint lives on the same layer as the shape.
Selection
Use the Selection tool with Freehand or Automatic mode to isolate a region, then paint, fill, or erase inside it. The selection works as a temporary stencil, and you can save it by filling it on its own layer.
For non-destructive work, clipping masks win, because you can adjust or delete paint layers without touching the stencil shape.
Clean Up and Export
A few habits make the export reliable:
- Remove the background. Hide the paper color layer before exporting if you need transparency.
- Handle white pixels. If your stencil is black lines on white pixels (as in Method 1), the white is real data. Either set the layer to Multiply when compositing later, or use Curves and selection tools to isolate the black and delete the white.
- Choose a format. Export through Actions > Share. Use PNG for flat stencils with transparency, PSD if you want to keep layers for further work in other software, and PDF for print.
- Check orientation. Some stencil transfer methods need a mirrored image. You can flip the canvas with Actions > Canvas > Flip Horizontal before exporting. Confirm what your printer or transfer paper requires.
- Print a test. Screens lie about line weight. A test print on plain paper reveals lines that are too thin or details that are too dense.
Common Problems and Fixes
Everything is white after Color Dodge. That's normal until you add Gaussian Blur. Make sure the blur is applied to the inverted top layer and set to Layer, not Pencil.
The lines are too faint. Increase the blur, then use Curves to darken. Also check that you desaturated the base before duplicating.
The result is noisy. Apply a small blur to the source before running the technique, or choose a cleaner image.
Edges look jagged. Your canvas is too small for the output. Rebuild at a higher resolution instead of upscaling a finished stencil.
Bringing Procreate Stencils Into After Effects
If you work in motion, a Procreate stencil is a handy asset. A few practical uses:
- Track mattes: Place the stencil above a layer and use it as an Alpha or Luma Matte to reveal footage through a custom shape.
- Stencil blend modes: After Effects has Stencil Alpha and Stencil Luma modes, which cut through everything beneath the layer. They suit graphic wipes and cut-out looks.
- Texture masks: Use a halftone or stencil as a multiply layer for print-style grit on type and shapes.
- Animated reveals: Import the PNG or layered PSD, then animate position, scale, or a Luma Matte threshold for write-on effects.
Export at least at comp resolution so you aren't scaling up soft edges. Keep a layered PSD if the client might want changes to line weight or detail later.
Extending a Stencil Look to Moving Footage
A stencil is usually a single frame, but the look often needs to carry across a whole shot. This is where an AI tool built for directed control can help, as long as you use it as part of the pipeline and not a replacement for it.
is an AI video and motion tool. You can take a stencil-treated frame you made in Procreate and try it as a style reference. Check Styleframe's current documentation for the inputs, features, output quality, and export formats it supports, and for any integrations with compositing software.
Treat the output like any other plate: your Procreate stencil still decides the graphic language, and your compositing workflow still does the final assembly.
Quick Reference
Final Tips
Start with the cleanest source you can find, and work at the final output resolution. Adjust the blur and Curves values by eye, because they depend on the image. Keep your original layers hidden but intact so you can rebuild the stencil if your needs change. Whether the stencil ends up on skin, on a wall, or in an After Effects comp, a few minutes of test prints and zoomed-in checks will save you more time than any shortcut.