How to Make a Square Monoline Brush Procreate
StyleFrame Team7 min read
To make a square monoline brush in Procreate, draw a perfectly centered solid square on a 2048 × 2048 px canvas, then import it as the Shape Source of a duplicated Monoline brush. Set the Apple Pencil pressure and tilt responses to zero so the line weight stays constant, and choose between a fixed or follow-stroke orientation depending on how you want the corners to behave. Procreate doesn't ship a true square shape and can't reshape a shape source, so you have to build it yourself.
Why Procreate has no square monoline brush by default
Procreate's shape library has almost nothing square-edged, and there's no perfect square. Brush Studio settings cannot reshape a shape source. If you need square end caps, you have to supply the geometry.
Two other constraints shape the workflow:
- The brush tip always sits at the center of the shape source. You can't offset the hit point, so an off-center square will make strokes drift away from your pencil.
- Hand-painted squares are never perfect. Even a steady stroke leaves slight variation in the edges. Build the square with tools that snap, not with a brush.
What you need
- Procreate on iPad
- An Apple Pencil, or a stylus that supports pressure, for testing
- The stock Monoline brush, which you'll duplicate and modify
Duplicating Monoline gives you a clean baseline, so you're only swapping the tip, not rebuilding the brush from nothing.
Step 1: Build a perfect square shape source
- Create a new 2048 × 2048 px square canvas. This is the right size for making brush source images, and a square canvas keeps the shape aligned to the center.
- Turn on Drawing Guide (Actions > Canvas > Drawing Guide > Edit Drawing Guide). Use the 2D Grid, or drop diagonal lines with QuickShape on a separate layer to mark the exact center.
- Add a new layer and fill it with a solid color using ColorDrop or a full-canvas fill.
- Open Transform and turn on Magnetics. Scale the filled layer down to the size you want. Magnetics keeps it centered and the edges aligned, which is the main advantage over drawing the square by hand.
- Hide the guide layers and the background layer so only the square remains.
If you want your brush to fill more of the canvas, scale the square up. If you want it to leave breathing room, leave a margin.
Shortcut: Procreate's default grain library includes a blank white source that fills the whole shape source. You can use it as a shape source and get a square without building anything. Some users find it a bit too big, so it suits some projects better than others.
Black or white?
Depending on how you made the image, the brush may behave as a negative of what you expected. If your stroke comes out as a square-shaped hole or looks inverted, check the colors of your source image rather than redrawing.
Step 2: Import the square into a duplicated Monoline brush
- In the Brush Library, swipe left on Monoline and tap Duplicate.
- Tap the duplicate to open Brush Studio and go to Shape.
- Under Shape Source, tap Edit, then Import. Choose Paste if the square is on your clipboard, or import from Photos or Files.
- Confirm the shape. A preview stroke at the bottom should immediately show square-edged marks.
- Rename the brush (Brush Studio > About this brush) so you can find it later.
If you're working from a separate canvas, copy the square layer to the clipboard, or save it to Photos or Files and import from there.
Step 3: Make it behave like a monoline
A monoline brush stays the same width regardless of pen pressure or speed. Check each of these settings:
Stroke path
- Spacing: Keep it low (near the minimum). Higher spacing leaves visible stamp marks, which breaks the clean line.
- Jitter: Zero.
- Streamline and Stabilization: Raise them modestly for smooth curves. High values add lag, so test with the strokes you actually draw.
Shape behavior
This is where the corners are decided:
- Fixed orientation (rotation 0°): The square never turns. Horizontal and vertical strokes are exactly the square's width, but diagonal strokes get wider because you're dragging the corners. This gives a chiseled, calligraphic look. You can get some corners this way, but not every corner every time.
- Follow Stroke: The square rotates with your path, so the stroke width stays constant, with flat square ends. This is the closer match to a true monoline. Lower spacing helps keep the stroke smooth on tight curves.
Set Scatter and Randomized to zero so nothing moves off-axis.
Apple Pencil
Open the Apple Pencil panel and zero out the pressure curves for size and opacity, and remove any tilt response. For a strict monoline, flatten the pressure response.
Properties
Set Maximum size and Minimum size so the brush doesn't shrink under light pressure. This keeps width consistent at any pressure.
Rendering
Check the rendering settings. Overlapping stamps can build up opacity unevenly, which shows up as darker joints along the stroke. Try different rendering options and compare against a test stroke at reduced opacity.
Step 4: Test it properly
Before using the brush on real work, draw a test sheet on a blank canvas:
- Horizontal, vertical, and 45° lines
- A tight circle and a long S-curve
- A sharp corner where two strokes meet
- A line at 50 percent opacity, to reveal overlap artifacts
Look for three problems: diagonal width changes (a sign you want Follow Stroke), dotted edges (spacing too high), and darker beads (rendering mode). Fix one setting at a time, since they interact.
Troubleshooting common issues
- Rounded corners: The source image was anti-aliased heavily or scaled down too far. Rebuild it at 2048 px with Transform and snapping, and keep the edges crisp.
- Stroke is offset from the pencil tip: The square isn't centered in the source canvas. Re-center it.
- Brush looks gray or faint: The shape source isn't pure black or white. Fill with a fully opaque flat color such as digital black.
- Wobbly edges on curves: Increase Streamline slightly, lower spacing, and try a different orientation mode.
Alternatives when a brush isn't the best tool
A brush isn't always the cleanest way to get hard-edged square lines:
- QuickLine and QuickShape: Hold at the end of a stroke to snap to a straight line or perfect shape.
- Selection tool: Tap points with the Selection tool to make straight-edged selections, then fill with ColorDrop. This is the cleanest way to get sharp corners.
- Text and fonts: For lettering, a font with squared terminals may beat any brush.
For 80s-style geometric graphics, many artists combine a brush for the base strokes with selection-based cleanup for corners. No single brush will give you every corner type in every direction.
Getting square-line artwork into a motion pipeline
If you're making this brush for animation or title design, plan the handoff early:
- Export at high resolution as PNG or layered PSD, so you can work with strokes or sections separately in your compositing tool.
- Keep line work on separate layers, one per element, so you can add masks or per-layer effects later.
- Consider vectorizing if you need infinite scaling. Procreate is raster, so a vector tracing or a manual redraw may be better for logo-grade work.
- Use the brush for look development. The square monoline style makes a strong reference for a graphic look you'll then build in motion.
Where Styleframe fits
Once you have a square monoline look you like, the next problem is usually extending it across moving footage or frames. is one tool you could look at for that.
It isn't a replacement for drawing the brush or for your compositing work. Use Procreate to define the look, and use Styleframe when you need that look applied across motion.
FAQ
Can I change a Procreate brush's shape without importing an image? No. As of version 5, Brush Studio can't alter the geometry of a shape source. You need to supply the shape as an image.
What size should the shape source be? 2048 × 2048 px is the common choice for making brushes, and the square canvas keeps the shape centered.
Should I use Follow Stroke or Fixed orientation? Use Follow Stroke for constant width and flat ends. Use Fixed for a chiseled, calligraphic feel where diagonals are heavier.
Why does my square brush look dotted? Spacing is too high. Reduce it in Stroke Path until the stamps blend into a continuous line.