How to Make a Square Brush in Procreate
StyleFrame Team8 min read
To make a square brush in Procreate, duplicate a simple hard-edged brush such as Monoline, open it in Brush Studio, and replace its Shape source with a white square on a black background. Then lower the spacing under Stroke Path, switch off rotation and scatter, and set Rendering to a glaze mode so the edges stay crisp. The result is a reusable brush for blocky marks, pixel-style texture, hard-edged mattes, and graphic stamps.
What you need before you start
You only need Procreate and a square shape. Everything else is a setting inside Brush Studio.
- A base brush. Monoline works well because it has no built-in texture or tapering to fight against. Any plain brush will do, but always duplicate it first (swipe left on the brush, tap Duplicate) so you don't overwrite a stock tool.
- A square image. You can draw this in Procreate (steps below), or import one from Photos or Files.
- A rough idea of the use case. A brush for filling large areas needs different settings from one for pixel-art marks or a stamp. Decide first, because it determines spacing and rotation.
Step-by-step: build the square brush
1. Draw the square shape
Create a new square canvas. A high-resolution one keeps the edges sharp when you scale the brush up. Hide the background layer or fill it black, then draw a white square that fills most of the canvas. Use QuickShape (draw a rectangle and hold at the end of the stroke) or the selection tool in Rectangle mode, then fill with white.
Leave a small margin around the square. A shape that touches the canvas edge can clip when the brush rotates or scales.
Copy the canvas using the Actions menu (Add > Copy canvas), or select all and copy.
2. Open Brush Studio on a duplicate
Go to your brush library, duplicate Monoline, and tap the duplicate to open Brush Studio. The attribute list on the left is where the rest of the work happens.
3. Replace the shape source
Tap Shape, then Edit in the Shape Source panel. Choose Paste to bring in the canvas you just copied, or Import to load a file from Photos or Files. Tap Done.
Check the preview at the top of the studio. If the stroke paints the background and leaves a square hole, the shape is inverted. Open the shape editor again and use the Invert option. In general, the light areas of the shape are what get stamped.
4. Set the Stroke Path
Open Stroke Path and lower Spacing. At high spacing, a square brush leaves a trail of separate stamps. At low spacing, the stamps merge into a continuous, flat-edged line. Start near the bottom of the slider and increase it only if you want a deliberately stamped, broken look.
Set Jitter to zero and keep Streamline low for precise control. Increase Streamline later if you want smoother lines for lettering or long strokes.
5. Lock the orientation
Open the Shape settings. This is where a square brush behaves like a square brush instead of a rotating diamond.
- Set Scatter to zero.
- Set Rotation to zero and turn off Randomized.
- Turn off Follow Stroke if you want the edges to stay aligned to the canvas. Leave it on if you want the square to turn with your stroke, which produces a calligraphic, chisel-like edge.
- Keep Count at one unless you want multiple stamps per touch.
- Turn off Azimuth unless you want the tilt of your Apple Pencil to rotate the shape.
6. Choose a rendering mode
Open Rendering. Glaze modes such as Intense Glaze keep the opacity of overlapping stamps consistent and the edges hard. Normal rendering can build up and show faint overlap seams at low spacing. Try both and draw a slow stroke and a fast stroke to see which one you prefer.
7. Tune pressure and size
Under Apple Pencil, set how pressure affects size and opacity. For a graphic, flat-color square brush, turn pressure sensitivity for size down so the square keeps a consistent width. For a more painterly feel, allow some pressure response.
Under Properties, set a sensible maximum and minimum size, then test the preview pad at the bottom of Brush Studio. Name the brush and tap Done. Move it into a custom set so it doesn't get lost among the stock brushes.
Quick settings reference
Variations worth making
A rectangular brush
You don't need a perfect square. Many painters prefer a slightly rectangular flat shape because it behaves like a real flat brush. In the shape editor, you can stretch the shape, or just draw a rectangle in step 1. Pair it with Follow Stroke for a convincing flat-brush effect.
A textured square
A clean square is useful, but it can look mechanical. Under Grain, pick a paper or canvas texture so the stamp picks up surface variation. This is a good way to get an organic, screen-printed or dry-media look while keeping hard geometry.
A one-tap stamp
If you want to stamp squares at a set size instead of drawing with them, raise Spacing well above the low values used for solid lines and keep Jitter at zero. Each tap or drag then drops clean, separate blocks. Do this on its own layer, so you can use the Transform tool to move, skew, or rescale the marks afterwards.
Straight edges without a custom brush
If you only need a few hard-edged shapes rather than a brush, you may not need Brush Studio at all. Draw a rough shape and hold the stroke for QuickShape, or use the selection tool in Rectangle mode and fill it. Tapping with the selection tool, rather than drawing, also gives you perfectly straight edges. For sharp corners on graphic or retro-style artwork, selecting and filling often beats brush work because a single brush can't produce every corner treatment cleanly.
Troubleshooting
- The stroke looks like a dotted trail. Spacing is too high. Lower it under Stroke Path.
- The corners look rounded or soft. The shape image may be low resolution or blurred. Rebuild it at a larger size with a crisp edge, and avoid anti-aliased, semi-transparent borders.
- The brush paints a hollow square or the wrong area. The shape is inverted. Invert it in the shape editor.
- The brush rotates unexpectedly. Turn off Follow Stroke, Azimuth, and any randomized rotation.
- Overlapping strokes show visible seams. Switch Rendering to a glaze mode, or lower the brush's opacity and build up gradually.
- The edges flicker at small sizes. Increase Streamline slightly, or make the base shape larger and rely on the size slider instead.
Using a square brush in a motion pipeline
A square brush is more than a drawing curiosity for animators and designers. It is a quick way to make blocky mattes, grid-based textures, glitch fragments, pixel-style overlays, and hand-built shape elements that feel less vector-perfect than anything generated inside a compositing app.
A few practical habits help when the artwork is headed for After Effects, Premiere Pro, or Nuke:
- Work on separate layers. Keep each pass (marks, texture, highlights) on its own layer, then export a layered PSD so you can control them in the compositor.
- Export with transparency. PNG preserves alpha, which matters for overlays and mattes.
- Match your delivery resolution. Set the canvas to the pixel dimensions of your comp so the hard edges stay sharp. Scaling a hard-edged square brush after the fact introduces softness.
Where Styleframe fits
Hand-painted frames can also be an input for AI-assisted work, as long as you keep control of it. is an AI video and motion tool. If you've painted a few key frames with your square brush, you can try using them as reference images and keyframes.
When the result is ready, you can bring it into your existing compositing workflow, so the painted look you built in Procreate moves through your normal pipeline rather than replacing it. It's an optional step for when a still style needs to become motion, not part of making the brush itself.
Frequently asked questions
Can I make a square brush in Procreate without importing an image?
Yes. Draw the square on a canvas, copy it, and paste it into the Shape Source. You never have to leave Procreate.
Why does my square brush look like a diamond?
Rotation is probably following your stroke direction or being randomized. Set Rotation to zero and switch off Follow Stroke, Randomized, and Azimuth in the Shape settings.
How do I get perfectly crisp edges?
Use a large, high-contrast source shape with no soft edge, keep Spacing low, and pick a glaze rendering mode. Match your canvas resolution to your final output size.
Can I share the brush?
Yes. Swipe left on the brush in the library and choose Share to export a .brush file you can send to teammates or import on another device.
Do I need Apple Pencil?
No, but pressure and tilt settings only matter if you use one. With a finger or stylus, set pressure response to a fixed value so the brush behaves consistently.
Wrapping up
Making a square brush in Procreate comes down to three decisions: the shape source, the spacing, and the rotation behavior. Get those right and you have a flexible tool that can be crisp and graphic or textured and painterly. Save a few variations (solid, chisel, stamped, textured) in one custom set, and you'll have a small kit you can reuse across illustration, texture, and motion projects.