How to Make a Sprite Sheet in Procreate
StyleFrame Team8 min read
Procreate can't export a sprite sheet on its own, so you build one in two stages. Draw or animate your frames at a fixed cell size, export them as individual transparent PNGs, then pack those PNGs into a grid with a Shortcut, Photoshop, ImageMagick, or After Effects. Procreate's team has marked native sprite sheet export as "not planned" on its feedback forum, so a second tool is part of the workflow.
What a Sprite Sheet Needs
A sprite sheet is a single image containing every frame of an animation in an even grid. Game engines and real-time tools read it by slicing the image into equal cells and stepping through them at a set frame rate. That means three requirements:
- Identical cell dimensions. Every frame must be the same width and height.
- Consistent registration. The character's anchor point (usually the feet or pelvis) must sit in the same place in every cell, or the animation will jitter in-engine.
- Transparency. Most sprites need a clean alpha channel with no baked-in background.
Procreate handles drawing and frame-by-frame animation well. The packing step is where you leave the app.
Step 1: Set Up the Canvas for One Cell
Create your canvas at the size of a single frame, not the whole sheet. Common cell sizes are 128×128, 256×256, and 512×512. Power-of-two dimensions are the safest choice for older engines and texture compression, though many modern engines handle any size.
Decide your grid before you draw:
- A 6-frame walk cycle might be a 6×1 or 3×2 grid.
- A 12-frame run cycle might be 4×3 or 6×2.
- The final sheet size is columns × cell width by rows × cell height. Six frames at 512×512 in a 3×2 grid gives a 1536×1024 sheet.
Leave padding around the character. Capes, weapons, and motion arcs need room to swing without clipping at the cell edge. Mark the anchor point with a guide layer (a crosshair or a ground line) that you hide before export.
Turn off the background color layer so the canvas is transparent.
Step 2: Build the Animation
You have two practical options inside the Procreate family.
Frame-by-frame in Animation Assist
Use Animation Assist for frame-by-frame work. Use onion skinning to see neighboring frames, and keep your guide layer set as a background frame so the anchor point stays fixed.
If you draw each frame as several layers, say line art, color, and shading, group them so each frame is easy to flatten before export.
Rigged animation in Procreate Dreams
If your character is drawn as separate parts (head, cape, forearm, hand, weapon), Procreate Dreams lets you import the layered file, give each layer its own timeline track, and animate with keyframes for position, rotation, scale, and opacity. A sword swing becomes a rotation on the weapon layer rather than a redraw.
Two practical notes from this approach:
- Draw parts that overlap past their joints, such as a cape extending beyond the head, so rotation doesn't reveal gaps.
- A new Dreams document starts at a large default size. Change the canvas in the document properties to your cell size before exporting.
Dreams can export "Frames as Images," which gives you an image sequence. That is the closest Procreate comes to sprite-sheet-ready output.
Step 3: Export Individual Frames
Export every frame as a transparent PNG with a numbered filename (walk_01.png, walk_02.png, and so on). Zero-padding keeps the files in the right order when you sort them.
- From Dreams, use the frames-as-images export.
- From Procreate, export your layers as PNGs to the Files app.
Check a few frames at 100% zoom before packing. Fringing on the edges, a stray background fill, or a shifted anchor is much cheaper to fix now than after the sheet is built.
Step 4: Pack the Frames into a Grid
Pick the method that matches the rest of your pipeline.
Option A: An iOS Shortcut
A workable on-device route is a Shortcuts automation that takes a folder of images and combines them into a grid. Export the frames to Files, run the Shortcut, and save the combined image. It's a good fit if you never want to leave the iPad, though you'll need to build and tune the Shortcut yourself.
Option B: Photoshop
Place the frames onto a canvas of the final sheet size and align each to its cell. Guides or a script that tiles layers speeds this up. It's the usual choice for artists who already have Photoshop in their workflow, and it makes manual cleanup easy.
Option C: ImageMagick (fast and repeatable)
For a clean, scripted result on desktop, ImageMagick's montage command does the whole job:
Change -tile to match your grid (for example 3x2). -geometry +0+0 keeps cells flush with no gaps, and -background none preserves transparency. Because it's a command, you can re-run it whenever you revise a frame.
Option D: After Effects
If you're already in After Effects, you can build the grid without leaving your compositing environment:
- Create a comp sized to the full sheet (for example 1536×1024).
- Import the PNG frames and drag them into the comp as individual layers, in order.
- Apply this expression to each layer's Position, adjusting
cols,w, andh:
- Render a single PNG frame with alpha (RGB+Alpha, straight or premultiplied depending on your engine's expectation).
The expression uses layer index, so reordering layers reorders cells. It also lets you swap in revised frames by replacing footage rather than repositioning anything.
Option E: A dedicated packer
Dedicated texture-packing tools can pack frames into an optimized atlas and output a data file your engine reads. This is worth considering when you have many animations per character and want trimmed, tightly packed sheets rather than uniform grids.
Step 5: Test in the Engine
Import the sheet and set the slice size to your cell dimensions (for example 512×512, 3 columns, 2 rows). Then check:
- Playback order. Frames should run left to right, top to bottom, unless your engine expects otherwise.
- Loop point. The last frame should flow into the first without a doubled pose.
- Edge bleed. If you see slivers of neighboring frames, add 1–2 px of padding between cells or enable your engine's edge-padding option.
- Filtering. Hand-painted sprites usually want bilinear filtering. Pixel art wants nearest-neighbor.
Where Styleframe Fits
Hand-drawing every frame is the slowest part of this process. Styleframe is an AI video and motion tool built for artist-directed control, and it can sit alongside Procreate for the stages before the sheet is packed. It isn't a replacement for drawing your character.
A realistic pipeline looks like this:
- Keyframe-driven Frames-to-Video. Draw your key poses in Procreate, then use them as keyframes so motion is generated between poses you defined rather than from a text prompt alone.
- Restyle and Ink-and-Paint. These are reference-driven style transfers, so you can push a rough animation toward your own line and paint look using reference images, keeping a consistent style across frames.
- Remove Background. Pull a clean alpha from generated footage so frames are ready for a transparent sheet.
- 4K Upscale. Raise resolution when your target needs a larger source than the generated output.
- 2D-to-3D and Turntable. For characters that need multiple angles, these can help produce reference views to draw from.
Every generation is driven by references, clips, and keyframes, and iteration is non-destructive, so you can revise a pose and regenerate without losing earlier versions. Output exports as image sequences, which drop straight into the packing methods above, whether that's ImageMagick, After Effects, or a texture packer. Styleframe works alongside After Effects and Nuke, and an After Effects plugin is on the way, so your compositing and cleanup stay where they are.
As with any generated motion, review each frame for anchor consistency and silhouette drift before packing. Sprite sheets are unforgiving of small registration errors.
Common Mistakes to Avoid
- Drawing at sheet size. Work at cell size, then assemble. Otherwise you'll resample later and soften your linework.
- Letting the anchor drift. Use a locked guide layer and check frames in sequence, not just individually.
- Exporting with a background. A flattened white or colored background means rework, so confirm transparency early.
- Inconsistent canvas sizes between exports. Different cell sizes break grid slicing. Reuse the same document or template for every animation.
- No naming convention. Numbered, zero-padded names save you when you have dozens of animations per character.
FAQ
Does Procreate have a built-in sprite sheet export? No. Frames can be exported individually, but the grid has to be assembled elsewhere.
What canvas size should I use? Use the size of one frame, such as 256×256 or 512×512, based on how large the sprite appears in your game, and design the grid around it.
Can I do the whole process on an iPad? Mostly. You can draw, animate, and export frames on the iPad, and a Shortcuts automation can combine them. Many artists find a desktop tool like ImageMagick or Photoshop faster to iterate with.
Which format should the final sheet be? PNG with alpha is the standard. Check your engine for any compression or atlas data requirements.