How to Make a Sketching Brush in Procreate
StyleFrame Team8 min read
To make a sketching brush in Procreate, duplicate a pencil or charcoal brush (swipe left on it, then tap Duplicate), open it in Brush Studio, and change the Shape, Grain, Stroke Path, and Apple Pencil settings until a test stroke on the Drawing Pad feels like the medium you want. Import a rough, irregular grayscale shape for the tip and a paper-like texture for the grain, then add light Streamline and pressure-based opacity. Tap Done to save the brush to your own set.
What a sketching brush needs
A sketching brush has to disappear while you work. Whether you're boarding a shot, roughing out a character pose, or painting a styleframe, the brush should respond to pressure and speed the way graphite does. It should also leave a line that reads clearly at a glance.
Procreate builds every brush from a few components:
- Shape: the stamp the brush repeats along your stroke.
- Grain: a texture that shows through the stroke, like paper tooth.
- Stroke Path: spacing, jitter, and falloff, which control how the stamps are laid down.
- Stabilization: Streamline, Stabilization, and Motion Filtering, which smooth or loosen your line.
- Apple Pencil dynamics: how pressure and tilt change size, opacity, and shading.
Most of the work is deciding which of these should be loose and organic and which should stay predictable.
Step 1: Start from a duplicate, not a blank brush
Open the Brush Library and pick something close to what you want. The Sketching set has pencils, and Charcoal and Drawing have useful starting points. Swipe left on the brush and tap Duplicate. Every change you make now affects the copy, and the original stays intact.
Starting from a duplicate is faster than building from scratch. You inherit sensible defaults for spacing, pressure curves, and rendering, and you only change what's wrong. If you do want a fully blank brush, tap the + in the brush set and Brush Studio opens with default settings.
It also helps to create a new brush set first. Tap the + at the top of the Brush Library's set list and name it something like "Sketch." Drag your duplicate into it. Once you start tweaking, brushes multiply quickly, and a dedicated set keeps your production brushes separate from experiments.
Tap the duplicate to open Brush Studio. The settings list is on the left, and the Drawing Pad is on the right. Use the pad constantly. Every change updates there in real time.
Step 2: Set the Shape
Tap Shape. The Shape Source is the stamp laid down along your path. A clean circle gives you a smooth, digital line. A pencil needs something rougher.
- Tap Edit under Shape Source.
- Choose Import, then Source Library for Procreate's built-in shapes. A rough, organic shape such as Ink Dry works well for pencil.
- Tap Done.
You can also import from Files or Photos, or paste an image from the clipboard. Whatever you use, it has to be grayscale. Pure black and white give an opaque stamp, and gray values become partial transparency. Procreate doesn't support full-color stamps.
Back in the Shape settings, Scatter and Rotation control how much the stamp varies. For a sketching pencil, keep these low or off. Too much scatter makes the line look like spray paint. Turn on Randomized only if you want the tip to vary along the stroke.
Step 3: Add a Grain
Grain is what makes a line look like it's sitting on paper. Tap Grain and open the Grain Source editor. The same import options apply: the Source Library, Files, Photos, or paste.
Two settings matter most:
- Movement: slide toward Moving and the texture drags with the stroke, which looks like a smeared stamp. Slide toward Texturized and the texture stays fixed to the canvas, like drawing on real paper. For pencil, Texturized is usually right.
- Scale and Zoom: these decide how coarse the paper feels. Scale relative to the brush size is easier to control. Use a fixed scale if you want the same paper grain at every brush size.
Your own grain sources look better than stock ones. Scan a sheet of cold-press paper, photograph tree bark or a sandy beach, or crop a section of a watercolor wash. Crop to a square, convert to grayscale, and import. If the edges show a visible repeat when you draw, rework the texture so it tiles, or use a pattern that has no obvious features.
Step 4: Tune Stroke Path and Stabilization
Stroke Path controls spacing, jitter, fall off, and distance. For a pencil, keep Spacing low so stamps overlap into a continuous line. High spacing leaves visible dots. A little Jitter adds the slight wobble of real graphite, but too much looks noisy.
Taper controls how the line thins at the start and end of a stroke. Short, subtle tapering gives you pressure-style line endings, which suits gesture sketching.
Stabilization is where you decide how much the brush corrects your hand:
- Streamline smooths the stroke as you draw. Low values clean up shaky lines without making the brush feel laggy. Higher values suit inking and clean line work.
- Stabilization averages your stroke over a distance. It's helpful for long, controlled curves and less so for fast sketching.
- Motion Filtering is another smoothing option that's more noticeable at higher values.
For loose gesture work, use light Streamline and no stabilization. For tighter clean-up passes, make a second brush with higher values rather than changing one brush back and forth.
Step 5: Set Apple Pencil response
Open Apple Pencil in Brush Studio. This is where a brush starts feeling like a pencil.
- Pressure: set pressure to control size and opacity. Pencil lines typically get both darker and wider as you press harder. Adjust the pressure curve until light strokes stay visible and hard presses don't clip immediately.
- Tilt: Procreate's tilt controls let the brush shade when the pencil is held flat, as with the side of a graphite stick. Enable tilt-based size or opacity, then set the Tilt Angle so shading begins at an angle you naturally use.
Test with slow, light strokes, fast scribbles, and a flat shading pass. If one of those feels wrong, go back to that setting. Spend time here, because pressure and tilt shape the brush's feel more than anything else.
Step 6: Choose Rendering and Properties
Rendering decides how stamps combine. For pencil, a light glaze mode keeps the build-up gradual, so repeated strokes darken the line in a natural way. Heavier glaze modes produce smoother, more paint-like results.
Under Properties, set a Maximum Size and Minimum Size that make sense for your canvas. Sketching brushes usually need a wide usable range, because you'll switch between rough blocking and fine detail. You can also set a preview size that determines how the brush appears in the library.
Finally, under About this brush, give the brush a clear name and, if you like, your own signature. Tap Done to save.
Step 7: Test on a real canvas
The Drawing Pad is great for quick feedback, but test the brush on your actual working canvas before relying on it. Check:
- Does the line stay legible at small sizes?
- Do overlapping strokes build up smoothly?
- Does the grain look right at the canvas resolution you export?
- Does it still feel good after twenty minutes of drawing?
Tweak, save, repeat. If the brush needs two different personalities, such as a hard 6H-style pencil and a soft, smudgy one, duplicate it and keep both.
Making a brush from your own drawing
If you want a custom stamp or a more distinctive texture, make it as an image first:
- Create a square canvas at a high resolution. A large square, such as 2048 × 2048 pixels, avoids blurry results.
- Fill the background with black and draw in white or grayscale.
- Pure black and white give an opaque stamp. Gray values produce semi-transparent areas.
- Copy the canvas, then paste it into the Shape Source or Grain Source editor, or export it as a PNG and import it.
Procreate stamps are grayscale only, so a detailed full-color drawing can't become a color brush. You can still keep the shape and use color when you paint.
Common mistakes
- Non-square sources: these distort when imported. Always work square.
- Low-resolution sources: brushes look soft or pixelated at large sizes.
- Too much jitter and scatter: the line stops looking like pencil.
- Editing the original brush: duplicate first.
- Skipping the pressure curve: a brush with the right texture but a wrong response never feels right.
Using Procreate sketches in a motion pipeline
For motion designers and animators, a good sketching brush mostly speeds up the early stages: boards, animatics, character poses, and styleframes. Export your sketches as PNGs or layered files, then bring them into After Effects, Premiere Pro, or Nuke like any other plate or reference.
This is also where Styleframe can fit in. Styleframe is an AI video and motion tool built for artistic control rather than one-click output. You can use your Procreate sketches as references and keyframes, so your drawn poses guide the motion instead of a text prompt.
Styleframe doesn't replace sketching or compositing. It gives your drawn work another way into motion while you keep control of the look.
FAQ
Can I make a sketching brush from scratch? Yes, but duplicating is faster and gives better defaults.
Why is my custom shape not showing correctly? Check that the source is square, high resolution, and grayscale.
Can Procreate brushes use color images? No. Shape and grain sources are grayscale.
How do I share or back up my brushes? Swipe left on a brush and choose Share, or share a whole set from the Brush Library.