How to Make a Rectangle with Rounded Corners in Procreate
StyleFrame Team9 min read
Procreate has no rounded rectangle tool, so you build one. The most reliable method is to fill a rectangle selection on its own layer, apply Gaussian Blur to round the corners, then use Automatic selection to turn the soft shape back into a hard-edged one and fill it. The alternatives are to assemble the shape from four circles joined by straight lines, or to make a rounded-rectangle stamp brush. All three produce raster shapes, so work at a high resolution, or build anything that needs an adjustable corner radius as a vector in After Effects, Illustrator, or Figma.
Why Procreate doesn't give you a rounded rectangle
Procreate is a raster painting app. Its QuickShape and Selection tools can make basic shapes, but there is no corner-radius control and no live shape you can edit afterward. Users have been requesting a rounded-rectangle selection on Procreate's feedback board for years, and the usual replies are workarounds like the ones below.
The consequence for production work is that every method here bakes the radius into pixels. You can't change it later, and scaling up softens the corners. Decide the final size before you start, and make the canvas larger than you think you need.
Before you start: set up the canvas
Corner quality depends on resolution more than on any other setting.
- Use a large canvas. Tutorials that use this technique recommend at least 300 DPI, and for motion work you should size the canvas to your delivery resolution or larger. If the shape will be a UI card in a 4K comp, build it at 4K or above.
- Work on a dedicated layer. Keep the rectangle on its own layer so you can undo or discard blurred intermediates without touching other artwork.
- Pick a flat, saturated color for the working shape. A solid dark fill on a transparent layer makes the selection step in the blur method easier to judge.
Method 1: Blur and re-select (best for clean results)
This is the fastest route to a usable rounded rectangle, and it gives you reasonable control over the corner radius.
- Make the rectangle. Create a new layer. Open the Selection tool (the S-shaped icon), choose Rectangle mode, and drag out your shape.
- Fill it. Drag a color from the color swatch into the selection, or use Fill Layer from the layer menu, so the rectangle is solid. Then deselect by tapping the Selection tool.
- Blur it. Open Adjustments (the magic wand icon), choose Gaussian Blur, and select Layer. Drag your pencil or finger to the right to increase the blur. More blur rounds the corners more. One tutorial uses about 10% on a high-resolution canvas, but the right amount depends on the shape's size.
- Select the blurred shape. Switch to the Selection tool and choose Automatic. Tap inside the blurred rectangle, then drag to set the selection threshold. A low threshold selects only the dense core and shrinks the shape. A higher threshold reaches further into the soft edge and grows it.
- Fill the new selection. Create a new layer above the blurred one, then fill the selection with your final color. Dragging to adjust the fill threshold lets you control how crisp the edge is. A high value gives sharper edges, and a low value leaves them soft.
- Clean up. Hide or delete the blurred layer. You now have a rounded rectangle with a hard edge on its own layer.
Tuning the radius
Blur strength is your corner-radius control. Increase it for rounder corners, and decrease it for tighter ones. The threshold in step 4 shifts the shape's overall size slightly, so expect a bit of trial and error. If your corners look faceted or stepped, the canvas is too small for the shape or the threshold is too aggressive. Undo, increase the canvas size, and repeat.
The limits of this method
Because the edge is rebuilt from a thresholded blur, the outline can look slightly choppy when scaled up. If you plan to enlarge the shape in your compositing app, work larger than your final output, not smaller.
Method 2: Circles and connecting lines (best for guided precision)
This approach builds the shape geometrically, using circles for the corners and straight lines for the sides. It takes more steps but gives you predictable proportions.
- Turn on the Drawing Guide. In Actions, open the Canvas tab, enable Drawing Guide, and tap Edit Drawing Guide to set a grid size that suits your shape.
- Draw a perfect circle. Use a solid brush such as Monoline. Draw a circle and hold the pencil down at the end so QuickShape snaps it into a clean ellipse. Place it on the grid.
- Duplicate and position. Duplicate the circle layer, open the Transform tool, and make sure snapping and magnetics are on so the copy lands exactly on the grid lines. Merge the two circles, duplicate the merged layer, and move it down to create four circles at the corners of your intended rectangle.
- Connect the corners. On a new layer, draw straight lines between the circles using the same brush size. Hold at the end of each stroke so QuickShape straightens it. The lines and circles must have identical stroke thickness, or you'll see bumps at the joints.
- Merge and fill. Merge the circle and line layers, then fill the interior with ColorDrop.
For an outline-only shape, keep the circles and lines on separate layers. Erase the unwanted part of each circle with the eraser, then merge. For a thicker outline, start with a thicker brush.
This method works well for outlined frames and UI strokes. For large filled shapes, it is slower than Method 1, and patching small gaps leaves edges that need cleanup.
Method 3: A rounded-rectangle stamp brush
If you need the same rounded shape repeatedly, such as a set of buttons or cards, make a stamp brush.
- Make a rounded rectangle with Method 1 or 2 on a square, high-resolution canvas, in black on white.
- Copy it, open the Brush Library, create a new brush, and import the image as the Shape source in the Brush Studio.
- Set spacing high enough that each tap leaves a single stamp, and turn off pressure-driven variation in size and opacity so the stamp is consistent.
- Tap to stamp, then resize with brush size.
This is also the easiest way to get different sizes quickly. The trade-off is that the corner radius scales with the stamp, so a large stamp has a proportionally larger radius than a small one.
Common problems and fixes
- Pixelated or jagged corners. Increase canvas resolution, reduce the amount of upscaling later, and make sure your blur isn't pushing the threshold into stepped values.
- Edges that look soft. Raise the fill threshold when you ColorDrop, or tighten the Automatic selection threshold.
- Visible seams where circles meet lines. Match stroke weights exactly and use snapping. Merge layers before filling, not after.
- Shape shifted or shrunk after the blur step. Adjust the Automatic selection threshold upward, or draw the original rectangle slightly larger.
- Unwanted overlap darkening on strokes. Some brushes build up opacity where strokes overlap, which can leave dark spots at joints. Switch to a brush with a flat rendering mode, such as a Monoline-style brush, and draw closed shapes in a single continuous pass.
Exporting for After Effects and other compositing tools
Once the shape is done, export it as a PNG to preserve transparency, and keep the canvas at the size you plan to use. Hide any background and reference layers first. In After Effects, Premiere Pro, Nuke, or Blender, the PNG imports like any other raster asset.
A few practical notes:
- Don't scale up in the comp. If you need the shape larger, go back and rebuild it at the right size.
- Consider whether Procreate is the right tool. If the rounded rectangle is a mask, a lower third, a UI card, or a track matte, it will almost always be better as a shape layer. In After Effects, the Rectangle path's Roundness property gives you an adjustable, resolution-independent corner radius you can animate. Procreate is the better choice when the rounded rectangle is part of a hand-painted illustration and you want it to share the same texture and edge character as the rest of the piece.
- Name and organize layers before you export, if you're delivering layered files to an animator. Separate fills, outlines, and any texture so they can be rigged and animated independently.
Where Styleframe fits in this workflow
A rounded rectangle on its own is a utility shape. Once it's part of a larger Procreate illustration, such as a card, a phone screen, or a framed panel, you may want to turn it into motion or explore it in other styles. is an AI video and motion tool built for artists who want control over the result, and it can take that artwork from there.
You can use your Procreate frames as reference images and keyframes in Frames-to-Video, so the motion is driven by your artwork rather than by a text prompt alone. Restyle and Ink-and-Paint use reference images and clips to transfer a look onto footage or frames, which is useful if you want a hand-drawn rounded panel to carry through a sequence. Other tools in the same toolset include 2D-to-3D, Turntable, Remove Background, and 4K Upscale. Iteration is non-destructive, so you can try variations without losing earlier versions, and output is production-ready 4K.
Be realistic about what it does for this task. 4K Upscale is for finished output and doesn't replace building your shape at a sensible resolution in the first place. Styleframe exports image sequences, so the results drop into After Effects or Nuke. You keep your existing compositing pipeline and use Styleframe as an extra step for generating and restyling motion, not as a replacement for it.
Which method should you choose?
- Filled shape, quick and clean: Method 1 (blur and re-select).
- Outlined frame or exact grid-based proportions: Method 2 (circles and lines).
- Many copies of the same shape at different sizes: Method 3 (stamp brush).
- Anything that needs an adjustable or animatable radius: Build it as a vector or shape layer in After Effects, Illustrator, or Figma, and bring only the painted artwork from Procreate.
In every Procreate method, the same rule applies: a bigger canvas gives you better corners. Start larger than your delivery size, and you'll have far fewer edge problems when the shape reaches the timeline.