How to Make a Realistic Box in Procreate
StyleFrame Team8 min read
A realistic box in Procreate comes from three things: correct perspective, a single consistent light source, and a believable material. Set up a perspective guide, block in each face of the box on its own layer, shade the faces by their angle to the light, then add contact shadows, edge wear, and surface texture. If you need to rotate the box or light it from different angles, paint it as a UV-unwrapped 3D model instead and use Procreate's Lighting Studio.
Pick a method: 2D painting or 3D painting
Procreate offers two valid routes, and the right one depends on what the box is for.
- 2D painting in perspective suits a single hero still, a storyboard frame, a texture plate, or a matte-painting element. You have full control over every edge and shadow, but the angle is locked once you commit.
- 3D painting on an OBJ or USDZ model suits cases where you need to see the box from several angles, or want to hand off a texture to a 3D app. You paint directly on the surface and can relight the object, but the model must already have UVs.
Motion designers often use both: a quick 2D paint to find the look, then a 3D pass when the box has to turn in space.
Method 1: Paint a realistic box in 2D
1. Set up the perspective guide
Open Actions → Canvas → Drawing Guide → Edit Drawing Guide and choose Perspective. Place your vanishing points by dragging them on the canvas. Use two points for a classic three-quarter view, or one for a front-on shot. Turn on Drawing Assist so strokes snap to the guide lines.
Keep the vanishing points wide apart. A box drawn with points too close together looks distorted, like it was shot with an extreme wide-angle lens. If you are matching a plate, put the horizon line where the plate's horizon sits.
2. Construct the box on its own layer
On a new layer, draw the nearest vertical edge first, then run the top and bottom edges toward the vanishing points. Close the back edges the same way. Treat this layer as a construction layer. You will lower its opacity or delete it later.
Real boxes are not perfect. Once the structure is correct, turn off Drawing Assist and add small deviations: slightly rounded corners, a faint bow in the flaps, a tiny gap where two flaps meet.
3. Block in each face on a separate layer
Put the top, the left face, and the right face on separate layers, each filled with a flat base color. Keep these in a group. Separate layers let you adjust values per face, which matters because a box is essentially three planes, each receiving a different amount of light.
Use Alpha Lock or clipping masks for everything you add afterward, so shading and texture stay inside the shape of each face.
4. Decide on the light, then shade by plane
Choose one light direction and write it on the canvas as a note, then delete it later. The face pointing most toward the light is the lightest, the top is usually bright if the light comes from above, and the face turned away is darkest.
On clipped layers above each face:
- Set a layer to Multiply and paint a gentle gradient to darken areas farther from the light. A soft brush works well.
- Add a second layer set to Overlay or Soft Light for subtle color variation, such as warm bounce light from a table surface.
- Keep the value range narrow. Beginners tend to push the darkest face too dark, which makes the box look like a cutout rather than an object in a room.
5. Add the material
For a cardboard box, texture does most of the work:
- Import a paper or cardboard photo texture into a clipped layer and set it to Multiply or Overlay at low opacity. Use your own photos or textures you have the license for.
- Paint faint corrugation lines on the cut edges of flaps. They should follow the perspective, converging toward the correct vanishing point.
- Add tape with a slightly glossy, lighter strip, a thin highlight along its edge, and a faint shadow underneath it.
- Add printed labels or stamps, and warp them with Transform → Warp or Distort so they follow the face's perspective.
For other materials, change the rules. A glossy box needs sharp reflections and a high-contrast highlight, a matte box needs soft falloff, and a wooden crate needs grain that wraps around each plank.
6. Ground the box with shadows
A box without a shadow floats. Add two types:
- Contact shadow: a thin, dark, tight shadow where the box meets the surface. Paint it on a Multiply layer beneath the box and keep the edge crisp near the contact line.
- Cast shadow: a longer, softer shadow pointing away from the light. Project it using the same perspective guide, then apply a Gaussian Blur from the Adjustments menu. Blur it more with distance from the box, since real shadows soften as they travel.
Also add a bit of ambient occlusion in the corners where the flaps fold, using a soft dark brush at low opacity.
7. Finish with edges and imperfections
The last 10 percent sells the realism. Add a thin highlight along the edges that catch light, scuffs and slight color loss on corners, fingerprints or dust on the top face, and a few uneven creases. Keep them subtle, and avoid placing wear evenly across the whole box, because real damage clusters around corners and handling points.
Method 2: Paint a box as a 3D model
Procreate's 3D painting works on OBJ and USDZ files, and the model must have UV maps.
- Prepare the model. Build a box in Blender, Cinema 4D, or any 3D app, and give it a clean UV unwrap. If Procreate reports "missing UVs," the model has no UV layout and needs one before import. Procreate also ships a model pack you can use for practice.
- Import and open it from the Gallery.
- Paint directly. Use the Apple Pencil to paint on the surface. Tap to select a mesh part, and use Paint through mesh when another mesh blocks the area you want to reach.
- Edit the 2D texture. Under Actions → 3D, toggle Show 2D texture to see the unwrapped map. This is the best place to lay in base colors, large textures, and details like tape lines or printed labels. Toggle it off to return to the 3D view.
- Light the object. Edit Lighting opens Lighting Studio, where you can add lights, adjust their hue, saturation, and intensity, and add environmental lighting.
- Preview in AR if you want a quick sense of scale. Note that AR uses the iPad camera's ambient light, not your Lighting Studio setup.
The advantage of this route is that your texture lives on a proper UV layout. You can send the same model back to Blender or Cinema 4D and shade it with your own renderer. Treat Procreate as the texturing step, then do final lighting in your 3D app.
Quick checklist for a convincing box
- All edges converge to the correct vanishing points.
- Three distinct values across the visible faces.
- One light direction, consistently applied.
- Contact shadow plus a softened cast shadow.
- Surface texture that follows the perspective of each face.
- Wear concentrated at corners and edges, not spread evenly.
- Slight irregularities in the geometry.
Getting the box into a motion pipeline
If the box is going into an After Effects comp, export a layered PSD so you can separate the box, the shadow, and the texture. Keep the shadow on its own layer so you can set it to Multiply in the comp and move it independently. For a 3D-painted model, export the model and textures and relight them in Cinema 4D or Blender.
For a still, 2D box, a few extra steps help:
- Export the box with a transparent background so it can sit on any plate.
- Paint at the final delivery resolution, or higher, to avoid resampling later.
- Match grain and color to your plate in the comp, not in Procreate.
Where Styleframe fits after the still is done
A painted box is a strong starting point for motion work, and this is where can fit. Styleframe is an AI video and motion tool that can work from your reference artwork.
Depending on your needs, you could use your painted box as a reference or keyframe to explore motion or alternative views. Check Styleframe's current documentation for its specific features, export formats, and compositing integrations.
For precise product geometry or exact dimensions, real 3D remains the right tool. Styleframe is most useful when you want motion or alternative views derived from artwork you have already painted.
Common mistakes to avoid
- Using pure black for shadows. Tint them with the color of the surface and the ambient light.
- Over-sharpening everything. Soften far edges and distant shadows.
- Ignoring scale. Texture detail should match the box's real-world size; a large box with tiny corrugation looks wrong.
- Painting without a light plan. Inconsistent highlights are the fastest way to break realism.
Start with a plain cardboard box, get the perspective, values, and shadows right, and the same workflow carries over to any other rectangular object you need to paint.