How to Make a Procreate Grid Brush
StyleFrame Team8 min read
To make a grid brush in Procreate, draw your grid pattern (dots or lines) in white on a black square canvas, export it as an image, then import it into a duplicated brush as either a Grain source (for a full-canvas pattern brush) or a Shape source (for a stamp brush). Turn off Offset Jitter, set the grain scale, and test the stroke so the grid stays continuous. The whole process takes a few minutes once you know where the settings live.
What a Procreate grid brush actually is
Procreate's built-in Drawing Guide gives you a 2D grid overlay, but it's a guide, not paint. A grid brush turns the grid into real pixels you can lay down on any layer.
There are two common versions:
- Pattern (grain) brush: one stroke fills an area with a repeating dot or line grid. This suits backgrounds, lettering practice sheets, and layout underlays.
- Stamp (shape) brush: each dab places a complete grid cell or set of lines. This suits ruling a specific block, such as a text box or a character-sheet panel.
Choose the pattern brush if you want a dotted page. Choose the stamp brush if you want precise, repeatable lines you can position by hand.
Before you start
You need Procreate on iPad and a square canvas. Square matters because grain textures tile cleanly when the source is square and the grid divides evenly. A 3000 × 3000 px canvas is a practical size: it divides neatly into a 4 × 4 grid with 750 px cells, and it's large enough that the pattern stays crisp at small scales.
Keep the artwork simple. A brush source only needs two values: the marks in white and the background in black. Grayscale works too, but start with pure black and white.
How to make a dot grid pattern brush
1. Set up the canvas and guide
- Create a new 3000 × 3000 px canvas.
- Open the Layers panel, tap the Background color layer, and set it to black.
- Add a new layer on top.
- Go to Actions → Canvas and turn on Drawing Guide.
- Tap Edit Drawing Guide, choose 2D Grid, and make the lines white so you can see them against black. Lower the opacity if the lines are distracting.
- Set Grid Size to 750 px (3000 ÷ 4). Tap Done.
If you work at a different canvas size, divide the pixel width by the number of cells you want across. Procreate's grid size field accepts pixel values directly, and you can switch units to centimeters, millimeters, or inches if your canvas was built for print.
2. Draw and place the first dot
Pick a clean round brush, such as Monoline from the Calligraphy set, and make sure your color is white. Draw a circle and hold at the end of the stroke so QuickShape snaps it to a perfect shape. Tapping a second finger while holding refines it to a true circle.
Next, use the Transform (arrow) tool with Snapping on and move the dot so its center sits exactly on a grid intersection. This is the step that determines whether your final pattern looks even, so zoom in and check.
3. Duplicate the dot across every intersection
Duplicate the layer, snap the copy to the neighboring intersection, then merge the two layers. Duplicate the merged pair, snap it over, and merge again. Doubling up this way is much faster than placing each dot individually.
Dots that sit on the canvas edge will be cut in half. That's fine, and it's actually what you want: when the texture tiles, the half-dots on opposite edges meet and form whole dots.
4. Export the source image
Turn off the Drawing Guide and hide anything you don't want in the brush. Then export through Share as a PNG or JPG. Alternatively, you can use Copy All (three-finger swipe down) and paste straight into the grain editor, which skips the camera roll.
5. Build the brush
- Open the Brush Library and swipe left on the Grid brush in the Textures set, then tap Duplicate. Starting from an existing texture brush saves you from configuring every setting.
- Open the duplicate to enter Brush Studio.
- Tap Grain → Edit → Import, then choose Import a photo (or Paste) and select your exported image. Tap Done.
- Turn Offset Jitter off. If it stays on, each dab shifts the pattern randomly and your grid breaks into a mess.
- Adjust the grain scale. The original tutorial this method is based on used 20%; adjust to taste.
- Rename the brush and, if you like, put your name on it as the creator.
If the dots appear as the "negative" of what you expected, invert the grain source by two-finger tapping in the grain editor so the marks sit on a black background.
How to make a line grid stamp brush
A stamp brush works the opposite way: instead of tiling a texture, it stamps a shape.
- Create a 3000 × 3000 px canvas with a black background.
- Using the Drawing Guide for alignment, draw white horizontal and vertical lines on a new layer. For a lettering guide, a few horizontal lines for baseline, x-height, and cap height are enough, plus as many verticals as you need.
- Export the image or copy it.
- Create a new brush using the plus icon in the Brush Library.
- In Brush Studio, go to Shape → Edit → Import and bring in your image. Tap Done.
- Under Stroke Path, set Spacing to 100% so stamps sit edge to edge instead of overlapping.
- In Properties, raise the maximum and minimum size and set opacity to 100%.
- Set the remaining dynamics (pressure, tilt, jitter) to zero so every dab is identical.
Now each tap places an exact copy of your ruled block. Because the stamp is a real raster, you can resize it, rotate it, or clip it to another layer.
Settings that make grid brushes behave
Most problems come down to a handful of settings:
- Grain behavior: Setting Zoom low makes the pattern scale with brush size, so a bigger brush gives you bigger cells.
- Offset Jitter: Keep it off for any grid. Random offset is the usual reason a grid looks misaligned.
- Pressure and opacity: If you want a consistent grid regardless of how hard you press, set the Apple Pencil opacity response to zero. If you want it to fade with light pressure, leave it responsive.
- Rendering: For grayscale sources, a mode such as Light Glaze keeps the value differences visible instead of flattening them.
- Min and max brush size: Pattern brushes can become unusably tiny at small sizes. Raise the minimum size until a small brush still produces a readable grid.
- Continuous strokes: To keep the grid continuous, don't lift the pencil mid-fill. Lifting can restart the texture alignment depending on your settings.
Test the finished brush on a fresh canvas with a light color on a dark layer, then on a light layer with a dark color, since contrast makes alignment errors much easier to spot.
Variations worth building
Once you have the workflow, the same method yields a family of brushes:
- Graph and hatch grids: draw intersecting lines instead of dots for graph-paper fills.
- Isometric or triangular dot grids: switch to the isometric guide and place dots on its intersections for 3D-style layouts.
- Layerable sets: keep a consistent grain scale across brushes so you can stack several grids on different layers without them fighting each other. Community brush sets use this approach.
- Project-specific grids: make a one-off brush for a given aspect ratio, letter height, or storyboard panel.
Using grid brushes in a motion pipeline
Grid brushes earn their place in motion work wherever you need structured stills before you animate:
- Style frames and boards: Block out compositions on a dot grid so type, logos, and focal points sit on consistent intervals, then export layers as PNGs for After Effects.
- Character and prop sheets: A stamped line grid keeps turnaround views the same height and proportion across drawings.
- Type and lettering: A baseline-and-x-height stamp keeps custom lettering consistent before you vectorize or rig it.
- Layout references: Export just the grid layer on transparency and drop it into Premiere Pro, Blender, or Cinema 4D as a reference overlay you can toggle.
Remember that the grid is a drawing aid. Hide or delete the grid layer before exporting final art.
Where Styleframe fits after the drawing
A grid brush gets you clean, deliberate still frames. Styleframe is one option for the next step, when those frames need to move.
A practical flow looks like this:
- Draw your start and end compositions in Procreate using your grid brush for alignment.
- Bring them into Styleframe as reference frames, so the motion follows your layouts rather than a text prompt.
Quick troubleshooting
- Dots look uneven: Your circles weren't snapped to the intersections. Redo placement with Snapping enabled and zoom in.
- Pattern is blurry: The source canvas was too small, or the grain scale is too high. Rebuild at 3000 px or larger.
- Grid breaks between strokes: Offset Jitter is still on, or you lifted the pencil mid-fill.
- Brush paints the inverse: Invert the grain image so marks are white on black.
- Lines vary in thickness: Zero out pressure and size dynamics on the stamp brush and set spacing to 100%.
Build one brush, test it, then duplicate it to make variants. After the first pass, you can produce a new project-specific grid in a couple of minutes.