How to Make a Procreate Brush in Photoshop
StyleFrame Team8 min read
To make a Procreate brush with Photoshop, build the brush tip or texture as a square grayscale image, export it as a JPG (or a PNG on a solid background), and import it into Procreate's Brush Studio as a Shape or Grain source. Procreate reads white as opaque and black as transparent, so your artwork should be white-on-black. Photoshop brush dynamics don't carry over, so you rebuild pressure, spacing, and jitter inside Procreate. To go the other way and use a Procreate brush in Photoshop, convert the .brush file to .abr first, since Photoshop can't read .brush files.
Which workflow do you need?
People searching this phrase usually mean one of three things, and each has a different path:
- Design a brush tip or texture in Photoshop, then use it as a Procreate brush. This is the main workflow below.
- Bring an existing Photoshop .abr brush into Procreate. Covered after the main workflow.
- Get a Procreate brush's look inside Photoshop. Covered near the end, including a conversion route and a manual rebuild.
The two apps use different brush engines. Procreate's is proprietary, which is why a brush never moves between the apps as a perfect copy. What moves reliably is the image data: the tip shape and the grain texture.
Step 1: Build the brush source in Photoshop
Photoshop is a good place to make brush sources because you have precise control over tone, cleanup, and scanned material.
Start with a square canvas. Use a high-resolution square (1024 or 2048 px per side is a common choice). A higher resolution keeps large brush sizes crisp. A square also avoids stretching in Procreate's shape and grain slots.
Create or gather your source art. Options include:
- Scanned ink or texture. Roll ink, dab a sponge, or press a screen onto paper, then scan in black and white at a high DPI (600 DPI is a good target for large brushes).
- Painted marks. Stamp a single dab with a Photoshop brush onto a clean canvas.
- Procedural patterns. Use filters, noise, or clouds, then process them into a usable texture.
Work in grayscale. Convert with Image > Mode > Grayscale. Procreate's brush engine only needs luminance.
Clean up with Levels. Add a Levels adjustment layer and pull the black and white sliders in until the background is pure white and the darkest marks are pure black. Crisp edges matter. A soft, muddy edge on the source produces a soft, muddy stroke.
Decide what is "paint." Procreate treats white as opaque and black as transparent. Most scans are dark marks on white paper, so you will need Image > Adjustments > Invert (Cmd/Ctrl + I) to flip them. You can also skip this step and invert inside Procreate (see Step 3).
Step 2: Export without the transparency trap
Format matters here, and it's the most common reason a new brush shows up blank.
If you save a PNG with a transparent background and your design is black, Procreate sees black as transparent. The result is an effectively empty square. To avoid this:
- Export as a JPG on a solid background, or
- Keep the PNG but make the design white, or
- Put black artwork on a solid white layer before exporting.
Save the file where your iPad can reach it: iCloud Drive, Dropbox, AirDrop, or the Photos library.
Step 3: Import it into Procreate's Brush Studio
- In Procreate, open the Brush Library and tap + to create a new brush.
- Open Shape and choose Edit under the Shape Source. Import your image from Photos, Files, or the clipboard.
- If the stroke looks inverted (a box with your design knocked out), tap the source with two fingers to invert it.
- Open Grain and set a Grain Source if you want texture inside the stroke. For a plain stamp, a blank white square works well.
- Open Stroke Path and increase Spacing for a stamp brush, so each dab reads as a distinct mark. Lower spacing gives a continuous line.
- Open General and turn on Orient to Screen if you want the stamp to stay upright regardless of stroke direction.
Then add dynamics:
- Apple Pencil settings control how pressure and tilt affect size and opacity.
- Stabilization, Taper, and Streamline shape how the line behaves.
- Properties sets the maximum and minimum size and opacity.
Test on a scratch canvas, adjust, and rename the brush. You can export it from the Brush Library and reuse it across devices.
Stamp brush vs. texture brush
- Stamp brush: Shape source is your artwork, with high spacing. Good for foliage, leaves, stars, and repeated marks.
- Texture brush: Shape source is a simple round tip, and your artwork goes in the Grain slot. Good for charcoal, ink, and paper-tooth effects.
Importing a Photoshop .abr brush into Procreate
Recent versions of Procreate can import .abr files. Open the Brush Library, tap +, choose Import, and select the file from your Files app. Imported brushes typically land in an "Imported" set, which may be at the bottom of the list.
Set expectations, though. Because of the different brush engines, an imported .abr usually gives you the tip shape but not the original dynamics, texture settings, or color behavior. Packs like Kyle Webster's rely heavily on Photoshop-specific dynamics, so the imported version will look and behave differently.
If the import fails or gives poor results, use the manual route:
- Open the brush in Photoshop and stamp it once on a transparent or white canvas.
- Save it as a PNG or JPG (mind the transparency rule above).
- Use that image as a Shape Source in Procreate.
- Rebuild spacing, jitter, and pressure response by eye.
An .abr viewer tool can also extract the tip images in bulk, which helps if you have large brush sets.
Saving the brush tip in Photoshop
If you want the same artwork available as a Photoshop brush too, select the region and choose Edit > Define Brush Preset. Name it clearly, and it appears in your brush picker. You can then tune scattering, shape dynamics, and angle jitter in the Brush Settings panel. This is a separate brush from the Procreate one, but both come from the same source image, so the textures stay consistent across apps.
Going the other way: Procreate brushes in Photoshop
Photoshop can't open .brush or .brushset files. You have two options.
Convert the file. A converter such as Brushfactory takes a .brush or .brushset file and outputs an .abr that Photoshop imports through the Brushes panel menu > Import Brushes. It maps tip imagery, grain, and pressure and tilt response to native Photoshop controls, and it reports anything that had to be substituted. Its free tier limits monthly conversions. Always compare the result against the original, since some settings have no exact match.
Rebuild by hand. Export the brush's shape and grain images from Procreate (or recreate them), define them as brush presets in Photoshop, and match the behavior with Shape Dynamics, Scattering, Texture, and Transfer settings.
When a brush is really a technique
Some Procreate brushes behave more like effects than marks. A well-known example is a "light pen" style brush that tints only the soft outline of a stroke while leaving the center unchanged. Photoshop has no single brush that does this, but you can approximate it:
- Expand the canvas slightly so edge effects don't bleed into your artwork.
- Add a black-filled layer above the artwork and lower its opacity so the image looks darker.
- Crop back to the original size with Delete Cropped Pixels turned off.
- Add an Inner Glow layer effect to the black layer.
- Use the Eraser with a medium-hardness brush on that layer to reveal the light.
The broader principle is to start from a bright image, darken it with an adjustment or fill layer, and paint the light back in by erasing or masking. It generally gives cleaner results than trying to brighten a dark image, which tends to band.
Troubleshooting
- Brush paints nothing or a blank square: the source is black on transparent. Re-export as a JPG, or make the design white.
- Stroke looks like a box with the design cut out: invert the source with a two-finger tap.
- Dabs overlap into a smear: raise Spacing under Stroke Path.
- Edges look soft or fuzzy: tighten Levels in Photoshop and export at a higher resolution.
- Imported .abr looks wrong: expect to rebuild dynamics. Only the tip shape reliably transfers.
Where this fits in a motion and VFX workflow
Custom brushes are often a means to an end: painterly textures, ink edges, and hand-drawn marks that end up in a composite. If you are making those marks for motion work, the brush is only the first stage. Frame-by-frame painting is slow, and getting a consistent look across a sequence is the harder problem.
That is where Styleframe can sit alongside your paint tools. It's an AI video and motion tool.
Your brush work stays yours. You still design the look in Photoshop or Procreate, and Styleframe helps carry it through motion. Check any generated result against your reference at full resolution before it goes into a delivery pipeline, as you would with any other source.
Quick checklist
- Make a square, grayscale source in Photoshop, cleaned up with Levels.
- Keep paint white and transparency black, or invert in Procreate.
- Export as JPG, or as a PNG with the right tonal setup.
- Import it as the Shape or Grain source in Procreate's Brush Studio.
- Tune spacing, orientation, and Apple Pencil dynamics.
- Convert or rebuild when moving brushes in the other direction.
Once you've built a few brushes this way, keep the Photoshop source files organized. They are the portable part of any brush, and they let you remake the brush quickly when you move between apps.