How to Make a Portrait in Procreate
StyleFrame Team8 min read
To make a portrait in Procreate, start a high-resolution canvas (around 4000 × 5000 px at 300 DPI) and keep your reference visible beside it. Sketch the big proportions loosely on a low-opacity layer, then refine on a new layer, block in values and a base skin tone, and build features and edges last. Keep every stage on its own layer so you can correct proportions with Liquify or Transform at any point, and so the finished file can be pulled apart later for animation or compositing.
Set Up the Canvas and Reference
Resolution is the one decision that's hard to undo, so make it first. Tap + in the gallery and choose a custom size. Many portrait artists land on something like 4000 × 5000 px or 3500 × 4000 px, RGB, at 300 DPI. That gives you room to zoom into eyes and hairlines without the file turning to mush, and enough pixels to crop or reframe in a video timeline later.
Before you commit to a size, think about how many layers you'll need. A portrait that you plan to split into skin, hair, eyes, and background passes needs more layers than a quick study.
Then sort out your reference:
- Pick a clear photo. Even lighting and readable features make proportion checks easier. Strong, simple light helps you see the large shapes of light and shadow.
- Keep it on screen. Put the photo in Split View beside the app, so you can compare as you paint without switching views.
- Check your time-lapse settings. Time-lapse is useful for reviewing where a drawing went wrong, and for sharing your process.
If you're painting from a photo you didn't take, treat it as study material only, and use your own or licensed references for anything client-facing.
Build the Sketch in Two Passes
Don't try to draw the final line on the first try. Work in two passes.
Pass 1: Loose Proportions
Create a layer and choose a soft, light-colored brush. A pale red or light blue works well because it won't compete with your darker line later. Draw the overall head shape and the largest forms first: the skull, the jaw, the hairline, and any hat or hair mass.
A few reliable construction habits:
- Start with a circle for the cranium and split it into halves.
- Divide the face into thirds using the brow line and the base of the nose.
- Draw the jaw by deciding how far it drops from the ear before it angles in. Check both sides so the curve is consistent.
- Use an object you can measure, such as a hat, to compare heights. If a beret fits twice into the visible face, check that ratio on your canvas.
For three-quarter views, remember that the eyes, nose, and mouth shift in perspective, so the frontal view is easier to practice first. In a straight-on view, both eyes should be the same size and sit the same distance from the center line.
Pass 2: Refined Line
Lower the opacity of the first layer and add a new layer above it. Switch to a darker, pencil-like brush such as a dry ink or 6B pencil. Now you can think in smaller shapes: the planes inside the cheek, the shape of the lids, the corners of the mouth.
If the likeness feels off, check these first:
- Distance between the eyes and from eyes to brow.
- Nose width relative to the eye spacing.
- Mouth width and its position between nose and chin.
- Ear placement against the brow and nose lines.
Fix problems with Adjustments → Liquify (Push) or by selecting a feature and using Transform. The advantage of digital work is that you can shift an eye by a few pixels in seconds. Spend your time on this stage, because errors in the sketch become more obvious once color goes on top.
Choose a Background Color and Block In Values
A white canvas makes thin color look unfinished, because the white shows through along edges like the hairline. Fill the background layer with a mid-tone that suits the mood of the portrait. A color picked from the environment behind your subject often works naturally, and a darker background will make lighter skin pop.
Next, work in big value shapes rather than outlines:
- Create a layer below your line art.
- Pick a midtone skin color that leans slightly light.
- Fill the whole face shape, then use Alpha Lock or a clipping mask so later shading stays inside it.
- On another layer, paint the main shadow shapes only where they actually appear in the reference.
Painting shadows only where they belong matters, because removing a wrongly placed shadow is harder than adding one later. Many painters shift shadows toward purple or a cool red instead of simply darkening the skin color, because layered color shows through and gives the face more depth. A limited palette helps: five or six skin values from highlight to deepest shadow is plenty.
Use the Color panel to save these swatches in a palette so you can return to the same values on later passes.
Paint the Features
With the value structure in place, move through the features in a consistent order. Work from the largest shapes to the smallest.
Eyes
Treat the eye socket as one form, including the brow, the lid, and the area under the eye, not as an isolated almond shape. Block in the whole eyeball in a slightly dark off-white (pure white rarely appears in skin-lit eyes), then add the iris, the pupil, and the upper lid's cast shadow. Add the catchlight last, and keep it simple.
Nose and Mouth
For the nose, describe the planes: the bridge, the side, the underside, and the nostrils. You rarely need hard lines, so soft transitions and one or two sharp accents do most of the work. For lips, paint the upper and lower lip as separate value shapes, and keep the line between them as the darkest, most defined edge.
Hair and Eyebrows
Block the hair as one mass first, using its overall light and dark shapes. Add strands only at the edges and in a few highlights. Eyebrows should follow the direction of growth, and the best brush for them is a small, hard brush with pressure sensitivity.
Edges and Blending
Variation in edge sharpness is what makes a portrait feel painted instead of pasted. Keep edges soft where forms turn away from light, and keep them crisp near focal points like the eyes. Use a soft airbrush or a blending brush with the Smudge tool to move between values, but avoid blending everything, or the face will look flat.
Finish and Check Your Work
Before you call it done, run a short check:
- Flip the canvas (Canvas → Flip Horizontal) to expose proportion errors you've stopped seeing.
- Zoom out to a thumbnail size and check that the values read clearly.
- View in grayscale temporarily, for example with a black fill layer set to Color blend mode, to verify that lights and darks are well separated.
- Compare against the reference at the same size.
Add final touches such as stray hair, a subtle texture, and color adjustments from the Adjustments menu. If you plan a stylized look like a neon portrait, you can use Add or Glow blend modes on separate layers over your base, and keep these effects separate so they can be toggled.
When you're done, export the finished piece as a PNG for sharing and a layered PSD if the painting will go into another application. Name your layers clearly (sketch, base skin, shadows, eyes, hair, background), since this labeling saves a lot of time downstream.
Taking a Procreate Portrait into a Motion Pipeline
For motion designers, animators, and VFX artists, a portrait often isn't the end product. It might be a character study, a title-card illustration, or a style target for a sequence. The layered PSD works well in After Effects, where you can separate the eyes, hair, and background and animate them with parallax or puppet tools. Procreate is a good source for the art, and After Effects, Nuke, or Blender remain the places where it gets composited.
Common Mistakes to Avoid
- Starting with details. Eyes and lips drawn before the proportions are checked will need to be repainted.
- Painting on one layer. You lose the ability to fix a jaw, shadow, or hair mass without damaging everything else.
- Working too small. Low-resolution canvases limit your zoom and make later upscaling or animation harder.
- Over-blending. A smooth gradient everywhere removes the structure you built in the value pass.
- Ignoring the background. A bare white canvas leaves gaps that make the portrait look unfinished.
Quick Workflow Summary
- Create a large canvas at 300 DPI and open your reference beside it.
- Sketch the big shapes lightly, then refine on a second layer.
- Correct proportions with Liquify and Transform.
- Choose a background color and block in the base skin tone.
- Paint shadow and light shapes in a limited palette.
- Develop eyes, nose, mouth, hair, and edges in that order.
- Flip, zoom out, and check values before finishing.
- Export a PNG and a layered PSD for use in your motion or compositing pipeline.
Practice this sequence a few times with different references and lighting, and the process will become fast enough that you can spend your attention on likeness and style rather than on mechanics.