How to Make a Planet in Procreate
StyleFrame Team8 min read
To make a planet in Procreate, draw a perfect circle with QuickShape, fill it with ColorDrop, and paint the surface on clipping-mask layers so nothing spills past the edge. Then add shading, an atmospheric glow, and a dark background so the sphere reads as a lit object in space. The whole process takes a handful of layers and the default brushes.
What You Need Before You Start
You only need Procreate and an iPad with an Apple Pencil, or a finger if you prefer. The built-in brushes are enough: Monoline (Calligraphy), Soft Brush (Airbrushing), and a few textured brushes from the Artistic or Spray Paints sets.
Decide what kind of planet you are making before you pick colors. A gas giant needs horizontal bands and swirling turbulence. A rocky planet needs craters, noise, and uneven edges. An Earth-like planet needs continents, clouds, and a thin blue atmosphere. A short reference board of real planetary photography helps, because the most believable planets borrow color relationships from real images.
If the planet is headed for an animation, set your canvas up for that now. Use the pixel dimensions of your After Effects composition, or something larger such as 4000 × 4000 px, so you can crop and scale later without softness.
Step 1: Set Up the Canvas and Guides
Create a new canvas at your target size. For a centered planet, open Actions and turn on Drawing Guide. Edit the guide and set the grid to a size that divides the canvas evenly, such as a quarter of the width. This gives you something to snap to when you center the sphere.
Fill the background layer with a very dark navy or purple instead of pure black. Pure black makes later glow effects look flat, and a slightly colored dark gives the atmosphere something to sit against.
Step 2: Draw a Perfect Circle
Create a new layer and name it "Planet." Choose the Monoline brush and sketch a rough circle. Hold your pen at the end of the stroke and the shape snaps into a smooth curve. While still holding, touch the screen with a finger to lock it into a true circle rather than an ellipse.
Fill it by dragging the color button from the top-right corner into the shape. This is ColorDrop.
Next, open the Transform tool, set it to Uniform, and turn on Snapping. Resize the circle and center it using the orange snapping lines. Use a mid-tone neutral for the base fill, such as a gray-blue or warm tan. You will tint and shade it later, and a neutral base gives you room to push in both directions.
Step 3: Add Surface Color with Clipping Masks
This is the step that makes everything else easy. Add a new layer above the planet, tap it, and choose Clipping Mask. Anything you paint on this layer now appears only inside the circle.
Build the surface in separate clipped layers rather than painting on the base:
- Base coat: Block in the major color regions with a large, soft-edged or textured brush. Do not chase detail yet.
- Mid-tone layer: Add darker and lighter variations to break up the flatness.
- Detail layer: Use a textured brush, such as clouds, spots, or grainy spray, to add fine structure.
Keeping these separate lets you adjust opacity, swap blend modes, or delete a layer without touching the rest. That matters later if you export for animation.
Step 4: Paint the Surface for Your Planet Type
Gas Giants
Paint horizontal bands in alternating warm and cool tones, such as cream, rust, and ochre. Keep the edges soft where bands meet. Then add a few darker oval storms and let their edges blend into the bands around them.
Rocky Planets
Start with a mottled base using a coarse textured brush. Add craters by painting a darker circle, then a lighter crescent on the side facing your light source. Vary crater sizes heavily. A planet with evenly sized craters looks like a pattern, not a surface.
Earth-Like Planets
Paint continents as irregular shapes on a clipped layer over a blue ocean base. Add a second layer for shallow-water tinting around the coastlines. Then add a separate cloud layer with a soft, textured brush at lower opacity. Gaussian Blur, found under the Adjustments (magic wand) menu, softens clouds and removes any harsh edges.
Step 5: Use Liquify to Break Up Perfect Bands
Painted bands can look too tidy. On a flattened copy of your surface layers, or on an individual layer, open Adjustments > Liquify. Use an effect such as Twirl at a moderate size to drag the edges of bands and create turbulence. Work with low pressure and small adjustments. Heavy liquifying turns surfaces into smears.
Liquify can be destructive, so duplicate the layer first. If you plan to wrap the texture in 3D later, keep a clean, un-liquified version too.
Step 6: Light and Shadow
A flat disc becomes a planet when it has one clear light source. Pick a direction, such as upper left, and commit to it.
- Add a new clipped layer set to Multiply. Paint a large soft shadow across the side opposite the light with a deep blue or purple, not black. Shadows with color feel more natural.
- Add another clipped layer set to Add or Soft Light. Paint a gentle highlight on the lit side.
- Soften the terminator, the line between light and dark, with a large Soft Brush at low opacity. Keep it a gradual falloff instead of a hard cut.
- Add a thin rim of reflected light on the shadow side using a desaturated, cooler color. This stops the dark side from looking like a hole.
Lower the opacity of each layer until the lighting looks natural, not dramatic. Subtle usually reads better.
Step 7: Add an Atmosphere and Glow
On a new layer below the planet, paint a soft halo with the Soft Brush from Airbrushing. Use a light blue for an Earth-like world, or a warm tan for a hazier atmosphere. Build it up slowly at low brush opacity, then apply a small Gaussian Blur if the edge still looks harsh.
For a crisp atmospheric rim, duplicate your base circle layer, enlarge it slightly, lock the alpha, and fill it with a bright color. Place it behind the planet, then blur it a little. This produces a thin glow that follows the planet's silhouette more accurately than freehand painting.
Step 8: Finish the Background
Add stars on a separate layer. Use a small, hard brush for the tiny ones and a soft brush for a few larger, glowing ones. Vary size and opacity, and avoid spreading them evenly. Put a few clusters in and leave dark gaps.
A faint nebula wash in one corner, painted with a big soft brush at low opacity, adds depth. Keep the area directly around the planet relatively clean so the sphere remains the focal point.
Taking Your Planet Into Motion
For a motion designer, a Procreate planet is usually a starting asset, not the final deliverable. A few habits make the handoff to After Effects painless.
Export layered. Use Share > PSD to keep layers intact. In After Effects, import as a composition with layer sizes retained, and you can animate the glow, clouds, stars, and shadow separately. Drifting a cloud layer independently, or pulsing the atmosphere, adds life with almost no effort.
Keep the surface texture clean. If you plan to map the painting onto a sphere in Cinema 4D or Blender, paint a flat version of the surface at a 2:1 ratio. Note that a flat circle painted in Procreate is a projected view, not an equirectangular map, so it cannot be wrapped directly. A separate texture layout avoids that problem.
Export at high resolution. Painted edges and grain hold up better when you can scale down rather than up.
Where Styleframe Fits
Once you have a finished planet illustration, is one tool you can explore for moving it toward motion while keeping control of the look. Check the product for its current features and export options before building a workflow around it.
That said, a hand-built 3D sphere with a proper texture is still the more predictable route when you need exact rotation speed, precise lighting, or physically consistent shadows. Treat Styleframe as a way to extend a painted look into motion, not as a replacement for modeling when exactness is the goal.
Common Mistakes to Avoid
- Painting directly on the base circle. Without clipping layers, one bad stroke means redoing everything.
- Using pure black for shadows. Tinted shadows keep the planet from looking dirty.
- Lighting from multiple directions. Pick one source and match the shading, rim light, and glow to it.
- Over-detailing the surface. A few well-placed features read better than uniform noise.
- Forgetting the background. A great planet on a flat gray canvas looks unfinished.
Quick Checklist
- Create a canvas at the size you need and add a dark background.
- Draw a circle with QuickShape, fill it with ColorDrop, and center it.
- Paint surface detail on clipped layers.
- Add Liquify turbulence on a duplicate.
- Set up light with Multiply and Add layers.
- Create an atmospheric glow behind the planet.
- Add stars and a subtle nebula.
- Export as a layered PSD for animation.
Once the process is familiar, you can produce new planets much faster by reusing the same layer structure and changing colors, textures, and lighting direction.