How to Make a Plaid Brush in Procreate
StyleFrame Team8 min read
To make a plaid brush in Procreate, build a seamless plaid tile on a square canvas by drawing straight monoline stripes in two directions and layering them with Multiply. Then convert the tile to grayscale and import it as the Grain source of a duplicated brush in Brush Studio. Procreate brush sources are grayscale, so a plaid brush gives you plaid structure in whatever color you pick. For a multicolor tartan, clip the tile to a layer instead of painting with a brush.
What a Plaid Brush Can and Can't Do
A Procreate brush has a Shape (the stamp laid down along the stroke) and a Grain (a texture that modulates the stamp). Both are read as black-and-white images, so neither can carry multiple hues. A grain-based plaid brush paints one color, broken up by the light and dark bands of your plaid.
That's often what you want. A single-color plaid brush works well for:
- Fabric and wardrobe detail on character art or style frames
- Overlay texture on backgrounds and props
- Quick tonal plaid inside a mask or selection
If you need red, navy, and cream bands in one stroke, build the full-color pattern on its own layer and clip it to artwork. I cover that below.
Step 1: Build the Plaid Tile
Start with a square canvas. A 3000 × 3000 px canvas gives you room to work and downsizes cleanly into a brush source later.
- Turn on the Drawing Guide. Go to Actions > Canvas > Drawing Guide > Edit Drawing Guide and set the grid to around 150 px. The grid isn't mandatory, but it makes stripe spacing easier to judge.
- Use a monoline brush. Pick a brush with no texture and no width variation. Texture or pressure variation will break the seam match when the tile repeats. Enlarge a native monoline brush if it's too small.
- Draw straight lines. Turn on Drawing Assist for the layer, or hold your stroke at the end so QuickLine snaps it straight. Drawing Assist on the 2D grid is more reliable for true horizontals and verticals.
- Alternate two tones. Draw vertical bands in a lighter and a darker value, spaced unevenly. Irregular spacing reads as plaid rather than a plain grid.
- Duplicate and rotate. Duplicate the layer, rotate it 90°, and set the top layer's blend mode to Multiply. The overlaps darken and create the woven crossing pattern.
- Merge the two layers. Keep a hidden copy of the originals in case you need to go back.
On a dark background, Multiply won't help much. Lower layer opacity instead. For a brush source you'll be converting to grayscale anyway, a light background with Multiply is the simplest setup.
Step 2: Check the Tile for Seams
A plaid brush only looks right if the texture repeats cleanly, so test the tile before you build anything on it.
- Use a three-finger swipe down, then Copy All.
- Swipe down again and paste onto a new layer.
- Duplicate that layer until you have four copies.
- Scale each copy to half size (1500 px on a 3000 px canvas) and snap one to each corner.
If stripe widths and values match across the center lines, the repeat is clean. If you see a visible seam, the problem is usually an edge stripe that was cut short or a line with an inconsistent width. Fix it on the original layers and test again.
Step 3: Prepare the Source Image
Brush sources work best when they're simple and high in contrast.
- Flatten the tile to a single layer.
- Desaturate it. Adjustments > Hue, Saturation, Brightness, with saturation at zero, works.
- Boost contrast with Curves so your lightest and darkest bands are clearly separated. Muddy midtones give a weak brush.
- Keep the canvas square.
Decide now whether you want darker bands to paint more or less. You can flip this later with the Invert option in the source editor, so don't agonize over it.
Step 4: Create the Brush in Brush Studio
Never edit a stock brush directly. Swipe left on a brush in the Brush Library and choose Duplicate. A flat, simple brush such as a monoline or a basic marker is a good starting point.
- Tap the duplicate to open Brush Studio.
- Go to Grain and tap Edit under Grain Source.
- Choose Import and pick Paste (if you copied the flattened tile) or Photos.
- Confirm the source and close the editor.
- Back in the Grain settings, choose the behavior:
- Texturized keeps the grain fixed relative to the canvas, which makes strokes feel like you're revealing a fabric underneath.
- Moving carries the grain with the stroke, which repeats the plaid inside each stamp.
- Adjust Scale to set how large the plaid squares appear, and Depth or Contrast to control how strongly the bands show.
Name the brush in the About tab before you leave Brush Studio, or you'll end up with a library of "Monoline 1" duplicates.
Step 5: Tune the Brush Behavior
The grain does the plaid. The rest of the brush determines how it feels to use.
- Stroke Path: Lower spacing for solid coverage. High spacing produces dotted stamps that break up the plaid.
- Taper and Pressure: Reduce or remove these if you want clean, even fills. Heavy taper makes plaid look like a worn pencil texture.
- Rendering: Keep it simple while testing. Complex rendering modes can hide whether your grain is working.
- Properties: Set a sensible maximum size so the brush opens at a usable scale.
Test on a blank layer with a mid-tone color. If the bands are too faint, raise Depth. If the plaid looks too large or small, change Scale before touching the source image.
Optional: A Plaid Stamp Using the Shape Source
You can also import the tile under Shape instead of Grain. This gives you a stamp that places a plaid square on every dab, and it suits pattern-like marks, such as labels, patches, or repeated swatches. The tradeoff is that the stamp edges are visible, so it's less seamless for fills. Shape sources treat white as the painted area, so you may need to invert the source if the stamp appears as an empty square.
When a Brush Isn't the Right Tool
For anything beyond tonal plaid, skip the brush and use the tile directly:
- Clipping mask: Place the full-color tile above your artwork layer and clip it. Your plaid shows only where the artwork exists, and it stays editable.
- Alpha Lock: Fill a shape with the pattern by pasting the tile onto an Alpha Locked layer.
- Selection plus paste: Select a region, then paste the tile and scale it to taste.
One Procreate artist who teaches plaid workflows points out that Photoshop offers more precision for tartans and gingham. If you need specific thread counts or exact repeat geometry, build the tile there and import it into Procreate afterward. The Procreate method is best when speed matters more than exactness.
Moving Plaid Into a Motion Pipeline
Most motion work needs the plaid outside Procreate. Export the flattened tile as PNG and treat it as a texture asset.
- After Effects: Place the tile in a comp and apply Motion Tile to extend it, then animate the Tile Center for scrolling fabric or backgrounds. Match the tile's pixel dimensions to your comp scale to avoid soft edges.
- Cinema 4D and Blender: Use the tile as a color or bump texture, with tiling set in the material. Keep a grayscale version for roughness or displacement.
- Nuke: Bring the tile in as a Read node and use it as a texture source or matte for compositing.
Export the grayscale source alongside the colored tile. Having both makes it easy to drive color and displacement separately.
Where Styleframe Fits
A hand-built plaid texture gives you a precise, repeatable asset. Styleframe is useful when you want to carry that look into moving imagery without rebuilding it frame by frame. It's an AI video and motion tool built around artistic control: generations are driven by reference images, video clips, and keyframes instead of a one-click prompt.
In practice:
- Restyle and Ink-and-Paint let you use a reference image, such as a swatch or a painted plaid frame, as the style target for footage or animation.
- Frames-to-Video builds motion between keyframes you define, so a plaid-textured start and end frame stay under your control.
- 2D-to-3D, Turntable, and Remove Background help turn a flat illustration with plaid clothing into a rotating or isolated asset.
- 4K Upscale gets finished output to production resolution.
Iteration is non-destructive, so you can revisit a generation without losing earlier versions. Output exports as image sequences and works alongside After Effects and Nuke, so you composite the results in your existing setup. Treat it as a way to extend a texture you've designed, and keep final compositing decisions in your usual tools.
Troubleshooting
- The plaid looks blurry: The source image is too small or the Grain Scale is too large. Re-import at a higher resolution or reduce scale.
- The pattern appears inverted: Use Invert in the source editor.
- Visible seams in the grain: The tile wasn't seamless. Return to Step 2 and fix mismatched edges.
- Strokes look like noise: Contrast is too low or the grain is too fine. Strengthen the bands and enlarge Scale.
- I need multiple colors: Use a clipped pattern layer rather than a brush.
Quick Recap
- Draw a seamless plaid tile with straight monoline stripes and Multiply.
- Verify the repeat by copying, pasting, and scaling into the four corners.
- Convert the tile to high-contrast grayscale.
- Duplicate a simple brush and import the tile as its Grain source.
- Tune Scale, Depth, and spacing until strokes read clearly as plaid.
- For full-color plaid, clip the tile to your artwork instead.