How to Make a Pixel Pen in Procreate
StyleFrame Team8 min read
To make a pixel pen in Procreate, create a new brush in the Brush Library, replace its round shape with a solid white square, and then strip out everything that softens a stroke: wet mix, pressure opacity, taper, jitter, and smudge. Set the stroke spacing so the squares tile cleanly, name the brush, and test it on a small canvas. The shape comes from copying a blank white canvas and pasting it into the Shape Editor.
What a "pixel pen" actually is
A pixel pen is a custom brush whose stamp is a hard-edged square and whose dynamics are switched off, so every tap lays down the same opaque block. Tutorials call it a pixel brush, pixel art brush, or pixel pen, but the build is the same.
The brush only gets you part of the way. Convincing pixel art also depends on canvas size, grid alignment, and how you scale the final file. All three matter once the art leaves Procreate and goes into a motion pipeline.
Before you start: set up the canvas
Decide your working resolution first, because the pen's apparent pixel size is relative to the canvas.
- True low-res canvas: a custom canvas such as 64×64, 128×128, or 320×180 px. One brush dab at a small size equals one art pixel, and you scale up on export.
- High-res canvas with a chunky pen: a normal canvas (for example 2048×2048) with a larger square brush. This works for a pixelated look, but you have to keep strokes aligned yourself.
For animation work, I recommend the low-res route. The file stays small and every pixel is intentional. It also scales by clean integer multiples (4×, 8×) later.
Step by step: build the pixel pen
Menu labels shift slightly between Procreate versions, but the flow is stable.
1. Make the square shape source
- Create a new canvas and fill it entirely with white. Fill the whole canvas, so no antialiased edge ends up in your shape.
- Open Actions (the wrench) → Copy Canvas. Alternatively, swipe down with three fingers and choose Copy.
A square canvas gives you a square stamp. If your canvas is rectangular, the stamp will be too, so use a square canvas for this step.
2. Create a new brush
- Open the Brush Library and tap + in the top-right corner. Brush Studio opens with default settings.
- Go to Shape and tap Edit on the Shape Source.
- Tap Import → Paste. The white square becomes the source. Tap Done.
3. Remove everything soft
Work through the Brush Studio panels and neutralize the settings that make strokes look painterly:
- Stroke Path: set Spacing high enough that dabs sit edge to edge without overlapping into a smear, and set Streamline and Jitter to zero. If you want a freehand line that behaves like a pixel line, leave a little Streamline off and rely on short strokes.
- Taper: set both pressure and touch taper to zero so stroke ends stay square.
- Shape: keep Scatter, Rotation, and Randomized at zero, and Azimuth off. You want the square to stay axis-aligned.
- Grain: none. Texture inside a pixel defeats the point.
- Rendering: choose a flat, non-glazing mode, and test it, because some modes soften edges.
- Wet Mix: drag every slider to the minimum. This is the setting that most often makes "pixel" brushes look smudgy.
- Dynamics and Apple Pencil: remove pressure-driven opacity and size so every dab is fully opaque and consistent. If you work with a finger or a stylus without pressure, this matters less, but do it anyway so the brush behaves the same everywhere.
- Properties: set Smudge to zero and drag Maximum Size to the left. A fixed size keeps the grid stable.
4. Name and save
Under About this brush, give it a clear name like "Pixel Pen 1px" and tap Done. Make a few duplicates for the sizes you use most (1, 2, and 4 px blocks), since changing size mid-drawing is a common cause of off-grid pixels.
Test it and fix common problems
Use the Drawing Pad in Brush Studio to try strokes before you leave. Then check these on a real canvas:
- Soft or blurry edges: usually Wet Mix, a Rendering mode, or Streamline. Zoom in far and check a single dab.
- Gaps or overlaps in a line: adjust Spacing. A diagonal drag should read as a staircase of blocks, not dots or a solid smear.
- Faint pixels: pressure is still tied to opacity somewhere in the Apple Pencil settings.
- Rounded corners: your shape source wasn't a fully filled white square, so re-copy the canvas.
- Off-grid strokes: turn on the Drawing Guide, choose a grid, and match the grid size to your pixel size. Use it as a visual reference even if you don't enable Drawing Assist.
Work at true pixel scale
Having a pixel pen is not enough if the file gets resampled badly afterward.
- Resizing: when you change canvas size, use nearest-neighbor resampling if your version offers it, because bicubic or bilinear will blur the edges you just drew.
- Export format: use PNG for stills. For animation, Procreate's Animation Assist can export your frames, and a PNG sequence is the safer choice for production because it keeps alpha and avoids compression artifacts.
- Scale in integers: export at 1× and scale up in your compositing app by 2×, 4×, or 8×. Non-integer scaling produces uneven pixel sizes, which show up as shimmer in motion.
Take Procreate pixel art into After Effects and other tools
For a motion designer, the pixel pen is the start of the job. The important part is keeping hard edges through every stage of the pipeline.
After Effects
- Import the PNG sequence and set the frame rate in Interpret Footage. Pixel animation is often on twos or threes, so match that to your intended cadence.
- Scale the layer up by an integer multiple. To avoid smoothing, switch the layer to Draft quality or apply a nearest-neighbor approach, and test it on a zoomed-in preview. Do not rely on Best quality sampling for pixel work.
- Turn off continuous rasterization on precomps unless you've confirmed it isn't resampling the art.
- Check output at 100% and 200% in the viewer before rendering, since motion can reveal blur that stills hide.
Premiere Pro: Scaling pixel art in the Effect Controls panel uses smooth interpolation, so do the scale-up in After Effects and bring in the result as a rendered clip or sequence.
Blender and Cinema 4D: Pixel art used as a texture needs its filtering set to nearest or "Closest" (in Blender, the Image Texture node's interpolation option). Otherwise the texture will blur at close range. In Cinema 4D, check the texture's sampling and filtering settings for the same reason.
Nuke: Choose a nearest-neighbor filter in Transform or Reformat nodes so the pixels survive scaling, then check the result against the source at 1:1.
Where Styleframe fits
A pixel pen gives you hand-drawn pixel assets. A lot of motion work needs the opposite problem solved: taking existing footage, 3D renders, or key art and getting it into a pixel-art or illustrated look without redrawing every frame.
is an AI video and motion tool built for artistic control rather than one-click output. Generations are driven by reference images, video clips, and keyframes, and iteration is non-destructive, so you can step back and adjust instead of re-rolling a black box. Practical ways it relates to a pixel-art workflow:
- Restyle and Ink-and-Paint: use reference-driven style transfer, with a frame or two you drew using your Procreate pixel pen as the style reference, to push footage or a render toward that look.
- Frames-to-Video: set keyframes, such as pixel-art poses you drew, and have the motion generated between them, with the keyframes controlling where the animation lands.
- 2D-to-3D and Turntable: turn a pixel character or prop into a 3D view and a turntable pass for reference or compositing.
- Remove Background and 4K Upscale: isolate a subject cleanly and deliver production-ready 4K output.
Be realistic about the result. A generative style pass won't necessarily land on a strict pixel grid, so you may still want to quantize or clean up the look in your comp, for example by downscaling and re-upscaling with nearest-neighbor filtering. Styleframe exports image sequences and sits alongside After Effects and Nuke, so you keep your compositing workflow.
Quick checklist
- Fill a square canvas with white and copy it.
- Create a new brush and paste the square as the Shape Source.
- Zero out Wet Mix, Smudge, Taper, Jitter, Scatter, and Grain.
- Remove pressure-driven size and opacity, and fix Spacing so the dabs tile.
- Work on a low-res canvas with a matching grid.
- Export PNG sequences and scale up in integer multiples with nearest-neighbor filtering.
Once the pen behaves the same way on every stroke, the rest is just drawing. The main work for a motion project is keeping those hard edges intact all the way through the composite.