How to Make a Pine Tree Brush in Procreate
StyleFrame Team9 min read
To make a pine tree brush in Procreate, paint a pine silhouette in white on a black square canvas, copy it, and paste it into a new brush's Shape source in Brush Studio. Then set Spacing, Jitter, and size limits in the Stroke Path and Properties tabs so each stroke produces a natural row of trees with varied heights. You can also start from a PNG with transparency, desaturate and invert it, and paste it as the shape in the same way.
What you need before you start
- Procreate on iPad, ideally with an Apple Pencil, since pressure can drive size and opacity.
- A square canvas. Brush shapes are square, so a square canvas avoids stretching. 3060 × 3060 px or 4000 × 4000 px is plenty.
- A textured brush for the silhouette. Any brush with some bristle or dry-media character works, because the stamp inherits its edge quality.
If you work in motion graphics, decide now how you will use the brush. A brush for painting a still matte-painted backdrop can be soft and loose. A brush for layered parallax plates should have crisper silhouettes so the trees separate cleanly later.
Step 1: Set up the canvas
Create a new square canvas. Resolution matters more than DPI here, because the shape source is a bitmap stamp. If the source is small, large strokes will look soft. Work at the size you expect to paint at, or larger.
Keep the background layer white while you paint. You will flip it later.
Step 2: Paint the pine silhouette
Draw a faint vertical guide line down the center of a new layer. This is the trunk axis, and it keeps the tree from leaning.
Build the tree outward from that axis:
- Paint tiered branches that get wider toward the base and narrower toward the tip. Pines and firs read as stacked, drooping layers rather than a smooth triangle.
- Leave gaps between tiers. Negative space is what makes the stamp look like a tree instead of a green cone, and it lets the background show through when strokes overlap.
- Use an eraser set to the same brush as your paint brush. This keeps edge texture consistent when you carve into the shape.
- Break symmetry. Make one side slightly sparser, shorten a branch, and add a few stray needles near the tips.
If the tree leans, use Transform with Distort to straighten it. Small corrections are fine, and a slight imperfection helps once the tree is repeated.
Make a few variations
Duplicate the layer and alter it. Scale one version taller and narrower, thin out another, and keep a shorter, wider one. Each variation gives you another potential brush, or another option to combine into a cluster stamp.
Procreate gives each brush a single shape source. If you want one stroke to produce mixed trees, paint several trees on one canvas and import them as one shape. If you want distinct brushes (say, a tall sparse pine and a dense fir), make a separate brush for each.
Step 3: Prepare the shape for import
Procreate reads the shape source as a grayscale mask. White areas deposit paint and black areas stay empty. Your tree therefore needs to be white on black.
- Hide the paper color or any background layers.
- Fill a background layer with black.
- Select your tree layer and use Adjustments → Curves, or simply the Invert option, so the tree becomes white. Alternatively, paint the tree white from the start and skip the inversion.
- Merge the visible layers if you want a cluster, then use Copy from the Actions menu or the three-finger swipe-down gesture.
Check the contrast. Mid-gray pixels become semi-transparent in the stamp, which can be useful for soft needle edges but muddy if overdone. Pure white and pure black give the cleanest result.
Step 4: Build the brush in Brush Studio
- Open the Brush Library and create a new brush set with the plus button at the top, so your custom brushes stay separate. Name it something like "Environment."
- Inside that set, duplicate a simple brush to use as a starting template. Duplicating is safer than building from scratch because you inherit a working set of defaults.
- Open the duplicate to enter Brush Studio and select Shape.
- Tap Edit in the Shape source area, choose Import, and select Paste. Your tree appears as the new shape. Confirm with Done.
- Choose a brush shape orientation that keeps trees upright. A fixed angle is generally better than "follow stroke," which would rotate trees along the path of your pencil.
Name the brush and give it a custom preview if you like. At this point, a single stroke will produce a tight line of overlapping trees, which is not yet what you want.
Step 5: Tune spacing, jitter, and size
This is where the stamp starts looking like a forest.
Stroke Path
- Spacing: Increase it until trees sit side by side with a little overlap. Lower spacing gives dense, overlapping forest; higher spacing gives scattered individual trees.
- Jitter: Add a small amount to offset each stamp slightly from the stroke line. This breaks up the perfectly straight row. Too much and the tree line loses structure.
- Streamline: Add a little to smooth wobbly strokes if you are painting treelines by hand.
Shape behavior
- Use Scatter sparingly for depth. It spreads stamps off the stroke path, which helps when you want a hill covered in trees rather than a single row.
- Enable Randomized if available for your template, to vary how each stamp is placed.
- Keep rotation small. A few degrees of variation feels natural; large rotations make trees fall over.
Properties
- Set Maximum Size and Minimum Size to control how much the tree size can vary. A wide range gives uneven treelines that look natural, while a narrow range keeps the stamp consistent for foreground trees.
- Map size to Apple Pencil pressure in the Pressure settings so you can press harder for large, close trees and lighter for distant ones.
Color dynamics
Under Color Dynamics, add slight Stamp Hue, Saturation, or Brightness jitter. Pine forests are rarely one uniform green, and small shifts in value help the stamp read as separate trees. Keep it subtle if you intend to color-grade later.
Step 6: Test, then refine
Open a fresh canvas and paint a few test strokes at different sizes, with a mid-tone background and a light one. Look for:
- Repetition: If you can spot the same branch pattern across the row, add more jitter or swap in a more complex shape.
- Edge quality: If edges look soft at large sizes, re-import a higher-resolution shape.
- Clumping: If trees merge into solid blobs, increase spacing or open up the gaps in the source.
- Hard cutoffs: If the base of each tree looks like a flat stamp, paint overlapping strokes from back to front, or follow with a hand-painted ground shadow.
Iterate on the shape and settings together. Many artists end up with two or three variants (sparse, dense, distant) rather than one universal brush.
Alternative: build the shape from a PNG
If you do not want to paint the tree yourself, you can start from a pine silhouette image with a transparent background. Make sure the image license allows your use. Save it to Photos, open it in Procreate, and convert it to a high-contrast white-on-black version using Adjustments such as Hue, Saturation, Brightness, and Curves. Copy it, then paste it as the shape source as above.
Silhouettes work well for distant tree lines. For closer trees you will usually want a painted shape with texture and visible branch structure.
Bringing Procreate trees into a motion pipeline
If these trees end up in a motion project, treat the Procreate file as a layered asset rather than a flat image.
- Paint foreground, midground, and background trees on separate layers so you can parallax them later.
- Hide the paper color and export as PNG with transparency, or export the layered file as PSD, so layers open as separate elements in After Effects.
- Paint slightly beyond the frame edges so camera moves do not reveal empty margins.
- Keep a clean sky layer separate from tree layers for easier color grading and atmospheric haze in compositing.
Once the layers are in After Effects, you can set up a multiplane camera, add fog or depth-based blur between layers, and animate wind with subtle displacement or puppet pins.
Where Styleframe fits after the brush work
A Procreate brush gives you control over a still illustration. Turning that illustration into moving, stylized footage is a different job, and that is where Styleframe can help. Styleframe is an AI video and motion tool built for artistic control rather than one-click output, and every generation is driven by your own references, clips, and keyframes.
Some practical uses for a painted pine forest:
- Frames-to-Video: Use two or more of your painted frames as keyframes, such as the same forest at dawn and at dusk, and generate the motion between them.
- Restyle and Ink-and-Paint: Use your Procreate painting as a style reference and apply that look to live-action or 3D footage, so a plate shot in the woods picks up your brushwork.
- 2D-to-3D and Turntable: Convert a painted element, such as a single hero tree, into a 3D asset and rotate it for camera moves.
- Remove Background: Isolate painted elements for compositing.
Styleframe is meant to handle the generative step rather than replace the tools you already use, so your compositing workflow stays intact.
Quick troubleshooting
- The brush paints solid squares: The shape has no black background or the invert step was skipped. Check that the mask is white on black.
- The tree appears inverted or as a hole: Invert the shape source again.
- Trees are rotating along the stroke: Switch the shape orientation to a fixed angle.
- Strokes look too uniform: Raise jitter, widen the size range, and add subtle color dynamics.
- The brush feels laggy: Reduce the shape resolution or lower the spacing density.
Final thoughts
A good pine tree brush comes from the silhouette: clear tiers, honest gaps, and slight asymmetry. After that, the Brush Studio settings do the rest. Spend your time on the source shape, build two or three variants, and export your paintings as layered assets so they can carry straight into your motion pipeline.