How to Make a Paint Brush in Procreate
StyleFrame Team7 min read
To make a paint brush in Procreate, open the Brush Library, tap the plus (+) icon to open Brush Studio, and build the brush from a Shape (the stamp) and a Grain (the texture it paints with). Then tune Stroke Path, Taper, Apple Pencil dynamics, and Wet Mix so it behaves like real paint. Test it on a blank canvas, press Done, and it's saved in your brush set. Duplicating an existing brush and editing the copy is the fastest way to start.
What You Need Before You Start
You need an iPad with Procreate and, ideally, an Apple Pencil. Pressure and tilt are what make a custom brush feel like paint rather than a digital stamp. If you want custom textures, collect a few source images beforehand: scans of ink splatters, watercolor washes on paper, sponge stamps, or photos of bark, plaster, or sand.
Three source-image rules prevent most of the "my brush is blank" problems:
- Use a square canvas. Non-square sources distort inside Brush Studio.
- Work large. Something like 3000 × 3000 px or bigger keeps the texture from going soft at big brush sizes.
- Think in black and white. Brush Studio reads white as opaque and black as transparent. Grays give you partial transparency.
Your source image can also come out blank because of a transparent PNG with a black design on it. The engine reads the black as transparent, so you import what looks like an empty square. Put the artwork on a solid white background, save it as a JPG, or make the design white. Once it's imported, a two-finger tap on the source thumbnail inverts it.
Step 1: Create a Brush Set and a New Brush
- Tap the brush icon to open the Brush Library.
- Scroll to the top of the set list and tap + to create a new set. Name it something you'll recognize, like "Paint – Custom." Keeping your own brushes out of the stock sets makes backups and sharing much easier.
- Inside your set, tap + to start a brush from scratch, or swipe left on an existing brush and tap Duplicate.
For a first paint brush, duplicating a stock brush with a painterly feel is usually the better path. You inherit working pressure curves and rendering settings and only change what you need. It also leaves the original untouched, so you can always go back.
Step 2: Choose a Shape
The Shape is the stamp Procreate repeats along your stroke. Open Shape in Brush Studio and tap Edit next to Shape Source. From there you can:
- Import from the Source Library, which has over 150 built-in shapes. Rough-edged shapes like blotches work well for a bristle look.
- Import a photo or file of your own.
- Draw one directly in the shape editor.
For a convincing paint brush, avoid a perfect circle. Real bristles leave irregular edges, streaks, and dry gaps. A shape made of several rough vertical streaks, or a scanned dry-brush mark, gives you that character before you touch any other setting.
Under Shape you'll also find Scatter, Rotation, Randomized, and Azimuth controls. Turn on Orient to Screen if your shape should stay fixed regardless of stroke direction. Leave it off for bristle shapes that should follow the stroke.
Step 3: Add a Grain
Grain is the texture that shows through the shape, like canvas tooth or paper fiber. Open Grain, then tap Edit next to Grain Source and import a texture from the library or your own photo.
- Turn on Auto Repeat so tile edges don't show when you paint.
- Choose Moving grain for a rolling, brush-like texture that travels with the stroke. Choose Texturized for a fixed paper-like surface that you "reveal" as you paint.
- Adjust Scale, Zoom, and Depth to control how strongly the texture bites into the stroke.
Shape plus Grain gives you the basic look. Everything after this is behavior.
Step 4: Set the Stroke Path
Under Stroke Path, Spacing controls the gap between stamps. Low spacing gives a continuous stroke, which is what you want for most paint brushes. High spacing shows individual stamps, which suits stipple or sponge looks.
Other settings to adjust:
- Streamline smooths wobble. Raise it for confident, clean strokes and lower it if you want a more hand-jittered feel.
- Jitter scatters stamps off the stroke line. A small amount can imitate bristle splay.
- Falloff makes the paint "run out" along a stroke, which is useful for dry-brush effects.
Step 5: Add Taper and Pressure Dynamics
Paint rarely starts and ends bluntly. Use the Taper settings (Pressure Taper and Touch Taper) to shape the start and end of each stroke. Then open Apple Pencil and decide what pressure and tilt control:
- Pressure → size, for natural thick-to-thin strokes.
- Pressure → opacity or flow, so light pressure lays down thin glazes and hard pressure gives full coverage.
- Tilt → a flatter, broader mark, like the side of a bristle brush.
Small adjustments make a big difference here. Test after each change rather than moving five sliders at once.
Step 6: Make It Behave Like Paint with Wet Mix
The Wet Mix section is what separates a "textured marker" from a convincing paint brush. It controls how the brush picks up and blends with color already on the canvas. The main controls:
- Dilution thins the paint, which is useful for watercolor and wash effects.
- Charge sets how much paint the brush carries.
- Attack controls how quickly the brush starts picking up existing color.
- Pull controls how far the brush drags color along the stroke.
- Wetness Jitter varies the wetness randomly, which prevents a mechanical look.
Pair these with the Rendering options, which control how overlapping stamps build up. Glaze-style modes suit transparent, layered strokes, and blending-oriented modes suit thicker, mixing paint. Try a few. They change the character of the same brush noticeably.
For a transparent watercolor-style brush, push dilution up, lower opacity and flow, and use a paper-like grain. For thick oil or gouache, keep dilution low, raise charge, and use a bristly shape with a subtle canvas grain.
Step 7: Set Size Limits, Name It, and Test
Under Properties, set the Maximum and Minimum Size so the brush stays usable at the sizes you need. Then in About This Brush, name it and add your signature if you want to share it.
Use the drawing pad on the right side of Brush Studio to scribble, then press Done and paint on a real canvas. Check:
- Does it work at both small and large sizes?
- Do fast, slow, light, and heavy strokes all behave sensibly?
- Do overlapping strokes build up the way you expect, or turn to mud?
- Does the texture tile visibly at large sizes?
If something's off, tap the brush again to reopen Brush Studio. Brushes are editable at any time, and you can share one by swiping left on it and tapping Share.
Common Problems and Fixes
- Blank brush after import: the source is probably black on transparent. Use a white-on-black or JPG source, or invert it with a two-finger tap.
- Blurry stamps: the source was too small. Rebuild it at a higher resolution.
- Visible tile seams in the texture: turn on Auto Repeat or make the source seamless first.
- Strokes look like repeated stamps: reduce Spacing.
- Brush feels dead: add pressure-to-size or pressure-to-opacity response, and a little Wetness Jitter.
Using Procreate Paint Textures in a Motion Pipeline
If you work in After Effects, Nuke, or Blender, custom brushes are a good way to produce original hand-made elements: paint strokes for reveals, dry-brush mattes, ink textures, painted overlays, and frame-by-frame animation. Export your artwork from Procreate as PNGs, or use its animation export for frame-based work, and bring the elements into your compositing application, where you can transform, track, and mask them as usual.
A hand-painted frame or two can also become a style reference for AI video and motion tools such as Styleframe, as one step among others in a larger process.
The aim is to keep your hand-built brush work as the source of the look, with compositing in the tools you already use.
Quick Recap
- Create a brush set and a new brush, or duplicate a stock one.
- Pick or import a Shape with irregular, bristle-like edges.
- Add a Grain, with Auto Repeat on.
- Tune Stroke Path: low Spacing, some Streamline, a touch of Jitter.
- Set Taper and Apple Pencil dynamics for pressure and tilt response.
- Use Wet Mix and Rendering to get paint-like blending.
- Set size limits, name the brush, and test it on a real canvas.
Make one change at a time and keep duplicates of versions you like. After that, you can build a whole set from your own scans, textures, and gestures.