How to Make a Noise Brush in Procreate
StyleFrame Team8 min read
To make a noise brush in Procreate, build a tile of random white dots on a black square, copy it, and import it as the Shape Source of a new brush. Then set Spacing to about 40%, Scatter to about 125%, and Rendering Mode to Uniform Blending. You can also generate a noise layer with Adjustments → Noise and import that as the brush's Grain Source for a texture that fills the whole stroke. The first method gives you a stamped, speckled grain shader, and the second gives you a film-like texture you can tune with Scale, Octaves, and Turbulence.
Two Kinds of Noise Brush
"Noise brush" can mean two different things in Procreate, and the build differs for each.
- Shape-based grain brush: The brush stamps tiny dots along your stroke. Scatter, count, and spacing control the density, so it behaves like a stipple or grain shader. It's good for shading, dimension, and dot-work effects.
- Grain-based noise brush: A noise texture is loaded into the Grain Source, so any stroke reveals that texture. It's good for filmic grit, paper-like surfaces, and texture overlays.
Most artists end up with both in their library. The shape-based version builds up shading, while the grain-based version adds a final tooth to the piece.
Method 1: Build a Stipple Grain Shader Brush
This method creates the noise pattern by hand, then turns it into a brush.
Step 1: Draw the noise tile
- Create a square canvas.
- Set the background to pure black.
- Choose a stipple-style brush, such as Stipple Light from the default library, and set the color to pure white. A small monoline brush with casual dabbing also works.
- Scatter white dots across the whole canvas without touching the edges.
- Erase clusters or overlaps so the spacing feels even. Clumps will read as repeating blotches once the brush is in use.
Pure black and pure white matter here, so the stamp has clear contrast.
Step 2: Copy the artwork
Swipe down with three fingers and tap Copy All. This puts the flattened canvas on your clipboard.
Step 3: Create the brush
- Open a brush library and tap + to create a new brush.
- In Stroke Path, set Spacing to around 40%.
- In Shape, tap Edit beside Shape Source. In the Shape Editor, tap Import → Paste, then tap Done twice to save.
- Under Shape Behavior, set Scatter to around 125% and Rotation to Follow Stroke.
- Under Rendering, set the mode to Uniform Blending.
- Under Apple Pencil, set Pressure Opacity to None. Pressure should change size, not transparency, or the grain will look faded rather than denser.
- Under Properties → Brush Behavior, raise Maximum Size to around 300%. This lets you paint wide patches of noise without the brush hitting its size ceiling.
Step 4: Add density and pressure response
- Raise Count under Shape Behavior to around 4 for a denser grain.
- If you want pressure to change dot size, set Pressure Size under Apple Pencil to around 50%, or whatever response suits your hand.
Name the brush, test it on a blank layer, and adjust from there. The values above are starting points, not rules.
Method 2: Generate Noise With the Adjustments Menu
Procreate has a built-in Noise adjustment that makes procedural patterns. You can use it to produce the source image for a more organic brush.
Step 1: Make the noise layer
- Create a new layer and fill it with a mid-tone color or black.
- Open Adjustments → Noise.
- Choose a style:
- Clouds is the coarsest and looks cloud-like at large scale.
- Billows is similar but finer and more textured.
- Ridges is the most detailed, with harder edges at large scale.
- Adjust the sliders:
- Scale sets the size of the noise features.
- Octaves adds detail and complexity.
- Turbulence warps and twists the pattern.
- Under Channels, choose Single for monochrome noise or Multi for colored noise. For a brush source, Single is almost always the better choice.
- Drag across the canvas to set the amount, then tap Apply to commit.
The Additive toggle decides whether the noise stays transparent over your image or fully covers it at 100%. For a brush source on its own layer, the opaque setting is usually what you want.
Step 2: Use it as a grain
- Copy the noise layer.
- Create a new brush and open Grain.
- Tap Edit beside Grain Source, then Import → Paste.
- Choose a grain behavior and test how the texture responds as you paint.
- Adjust Scale and Depth until the grain reads at the size you need.
You can also paste the same image into Shape Source for a brush that stamps a noise patch. Pair it with high Scatter and low opacity for a soft, painterly speckle.
Tuning a Noise Brush
A few settings change the character of a noise brush more than any others.
- Spacing: Tight spacing produces dense, continuous coverage. Wider spacing produces visible individual dots.
- Scatter: More scatter breaks up the line of the stroke so it looks like a spray instead of a path.
- Count: Increases density without needing more strokes.
- Pressure curves: Mapping pressure to size gives you control for dot-work shading. Mapping it to opacity lets you build from faint to solid.
- Jitter: Small amounts of size or opacity jitter stop the pattern from looking too uniform.
Check the brush at several canvas zoom levels, and especially at the resolution you'll deliver. Noise that looks fine zoomed in can look like harsh pixel static once scaled down, or too soft once scaled up.
Common Problems
The strokes look blocky. The imported shape may be too low contrast, or the stamp is being resized too aggressively. Rebuild the tile on a larger square with true black and white.
You can see a repeating pattern. Dots are too evenly placed or the tile is too small. Redraw with more irregular spacing, or increase scatter and rotation randomness.
The brush paints too opaque. Check Pressure Opacity and Rendering mode. If you want it to build up, reduce flow or opacity in the brush settings.
The noise looks gray rather than speckled. Increase contrast on the source image, or reduce the Octaves so the pattern has clearer highs and lows.
Using Procreate Noise in a Motion Pipeline
For motion designers, a hand-built noise brush is useful because it produces textures that procedural generators don't always give you: irregular, hand-placed grain with a believable analog feel. A few ways to use it downstream:
- Texture overlays: Paint noise on a transparent or neutral layer, export a high-resolution PNG, and layer it in After Effects with Overlay, Soft Light, or Multiply, depending on whether the base is light or dark.
- Animated grain: Procreate noise is static, so paint several variations and cycle them in After Effects at a low frame rate, such as 8 to 12 fps, to get a boiling, hand-drawn texture. Time Remap or Posterize Time can help hold frames.
- Matte and mask textures: Use noise artwork as a luma matte or displacement map to break up clean edges.
- Cross-app work: Procreate noise can be brought into Photoshop, Blender, or Cinema 4D as an image texture, or into Nuke as a plate to blend with the rest of the comp.
After Effects also has Fractal Noise, which is fully procedural and animatable. The two approaches complement each other: use Fractal Noise when you need evolving, resolution-independent noise, and use a Procreate brush when you want a drawn, irregular quality.
Where Styleframe Fits
Once you have a distinctive noise texture or a grain-shaded illustration, the next question is usually how to carry that look into moving footage. is an AI video and motion tool built for artistic control. Its Restyle and Ink-and-Paint features are reference-driven style transfer, so a textured Procreate frame can serve as the reference that guides how footage or generated clips are rendered. Frames-to-Video is keyframe-driven, so you define the key poses or frames yourself and Styleframe works between them rather than producing a one-click result you can't steer.
Every generation is driven by your reference images, video clips, and keyframes, and iteration is non-destructive, so you can try variants without losing earlier passes. Output is production-ready 4K, with 4K Upscale available for lower-resolution material, and Remove Background, 2D-to-3D, and Turntable cover common prep tasks. Styleframe exports image sequences, so the results drop into After Effects or Nuke and you keep your compositing workflow. An After Effects plugin is on the way.
A practical pairing: paint your grain and shading keyframes in Procreate, use them as references and keyframes in Styleframe, then bring the exported sequence into After Effects. There you can add your own noise overlays, color treatment, and finishing.
Quick Reference
FAQ
Can I make a noise brush without drawing dots by hand? Yes. Generate noise with Adjustments → Noise, copy it, and paste it into the Grain Source or Shape Source of a new brush.
Should I use Clouds, Billows, or Ridges? Clouds is the coarsest, Billows adds finer detail and texture, and Ridges is the most detailed. For fine grain, start with Billows or Ridges at a small scale.
Why does my brush look different at different canvas sizes? Grain and shape scale are relative to the brush and canvas. Test at your final delivery resolution and adjust Scale or Maximum Size accordingly.
Is a Procreate noise brush good for film grain? It can work for stylized, hand-made grain. For physically based film grain across a full composite, a dedicated grain tool in your compositing app is usually the better match. Many artists use both.