How to Make a Neon Sign in Procreate
StyleFrame Team8 min read
To make a neon sign in Procreate, draw each tube as a single-width colored line on a dark canvas, add a thinner white core on a layer above it, and then stack blurred duplicates of both layers underneath to create the glow. Finish with Procreate's Gaussian Blur or Bloom adjustment, and use Add or Screen blend modes so the light builds on the background instead of covering it. Keep every element on its own layer and you can export the sign for animation in After Effects.
What Makes a Neon Sign Read as Real
Most flat "neon" effects fail because they ignore how the object is built. A real sign is bent glass tubing filled with gas, and that gives you a few rules to borrow:
- Tubes are continuous and open-ended. A letter like "O" needs a small break where the tube starts and stops. Tight angles and sharp corners don't exist; glass has a minimum bend radius.
- Tubes don't overlap. Where lines would cross, break one of them and let the other pass in front, or route the tube behind.
- The color is in the glass, the hot spot is in the middle. Saturated color on the outside, near-white core inside.
- Light spills onto nearby surfaces. A convincing sign lights the wall, not just itself.
Collect two or three photos of real signs before you draw anything. Study how the glow falls off, how the color shifts toward white near the core, and how the tube ends are capped.
Set Up the Canvas and Sketch the Layout
Start with a dark canvas, either solid near-black or a textured background you'll add later. If the piece is headed into a video comp, use a canvas matching your delivery frame, for example 3840 × 2160 for UHD, and work at 300 dpi if you also plan to print it. Procreate limits the number of layers by canvas size, and a neon sign eats layers quickly, so bigger canvases mean fewer layers available.
Sketch on its own layer in a neutral gray. Keep the composition simple: a single word, or a short phrase plus one icon. Draw it as if the tube must be bent by hand. Interrupt lines where they would cross, and leave gaps at the start and end of each continuous run of tube. Lower the sketch opacity once you're happy with the layout.
Draw the Tubes
Create a new layer above the sketch and name it "Tube Color." Pick a bright, saturated color. Neon colors that work well on a dark background include hot pink, cyan, electric blue, and amber-orange. Muddy or desaturated colors will look like colored chalk once the glow is applied.
Use the Monoline brush from the Calligraphy set, or any brush with a consistent width and no pressure variation. Consistency matters because real tubing has a constant diameter. Trace over the sketch with smooth strokes. Use the QuickShape and StreamLine features to clean up curves. Redraw any stroke that wobbles more than a hand-bent tube plausibly would.
Make the tubes slightly thinner than you think they should be. Every glow effect you add afterward will visually thicken them.
Add the White Core
Create a new layer above the color layer called "Core." Using white (or a very pale tint of your tube color), draw a thinner line down the center of every tube. A good starting width is slightly more than a third of the colored tube width. It doesn't have to be perfect, because you'll blur some copies of it.
Duplicate the core layer and hide the original as a backup. On the duplicate, erase small sections where the tube bends or crosses another tube, so the core appears to disappear behind a crossing. This small break sells the illusion that the tube passes over or under another.
Fake the Glass: Crossovers and Shadows
Where one tube passes in front of another, add a subtle dark contact shadow on the lower tube. Put these on a separate layer, painted in black, with the layer set to around 30% opacity. For extra control, duplicate that layer and set the copy to Soft Light, adjusting opacity until the shadows feel natural against your tube color. Tweak by eye, because the right values change with the color you chose.
Optionally, add a thin, dark "mount" behind the sign, such as small wire supports or a backing plate. These details help in motion work, because they give your lighting something physical to interact with later.
Build the Glow
Procreate gives you two workable approaches. You can mix them.
Method 1: Gaussian Blur on duplicate layers
- Duplicate your Tube Color layer twice and your Core layer once.
- Open Adjustments (the magic wand icon), choose Gaussian Blur, and select Layer mode.
- Blur the first color duplicate heavily to make a wide, soft halo. This is your outer glow.
- Blur the second color duplicate lightly to create a tighter inner glow.
- Blur the core duplicate just enough to create a soft white wash over the center of the tube.
- Set the glow layers to Add or Screen so they brighten what's underneath instead of covering it. Adjust opacity until the sign has bloom without losing the sharp tube.
Order matters. From bottom to top, a workable stack is: wide halo, tight glow, sharp color tube, blurred core, sharp core. Use Alpha Lock or a clipping mask when you need to recolor a layer without changing its shape.
Method 2: Bloom
For a faster result, flatten a copy of the sign and apply Bloom from the Adjustments menu. Tune Transition, Size, Pressure, and Opacity until the glow feels right. Bloom is quick, but it works on the whole layer at once. You can't control how much glow each tube gets, which makes it harder to give two different colors different intensities. For production work, the layered blur method gives you more control, and the layers carry over into motion.
Light the Wall
A neon sign in a void looks fake. Add a background such as a brick wall, painted concrete, or a dark glass window. Reduce its brightness and darken the edges with a black layer and a soft eraser to create a vignette.
Then add environmental light:
- Duplicate your blurred color layer, enlarge it, and set it to Add or Overlay above the background to tint the wall.
- Add a faint, wide, low-opacity wash of the tube color across the surface closest to the sign.
- Paint very subtle reflections if there's glossy material nearby.
The wall light should be much softer than the tube glow. If the wall is as bright as the sign, the whole image will look flat.
Export for Motion Work
If the sign is headed into a video project, think about what you'll need to animate before you export:
- Export a layered file. Procreate can export a layered PSD, which After Effects and Photoshop can open with the layers intact. Keep the tube, core, inner glow, outer glow, shadows, and background on separate layers.
- Export transparent PNGs of the sign without the background if you want to place it in a comp or over footage.
- Name your layers clearly. "Glow_Outer," "Core_Sharp," and "Wall_Spill" will save you time later.
- Separate letters or segments if you want parts of the sign to flicker independently. Put each letter on its own set of layers before you finish.
Animating the Neon Sign in After Effects
Once the layered file is in After Effects, the animation is mostly about controlling light:
- Turn-on sequence: Animate the opacity of the core and glow layers in stages. Neon tubes tend to sputter before they hold, so use a few stuttering opacity keyframes instead of a smooth fade.
- Flicker: Link opacity to an expression such as
wigglewith a high frequency, or use a Random Hold keyframe pattern. Apply it to one letter or one tube at a time rather than the whole sign. - Glow: Use the Glow effect on top of your painted glow layers, or build a custom glow with Gaussian Blur and the Add blend mode, for finer control than a single plug-in setting.
- Wall spill: Animate the wall light layer in sync with the tubes so the environment responds to every flicker.
- Camera movement: Add a slight parallax if you've separated the sign from the wall.
Where Styleframe Fits
A hand-built Procreate sign gives you precise control over every tube, and that stays valuable. Styleframe is an AI video and motion tool you can use to take that artwork further in motion without losing control.
Your compositing workflow stays intact, and the generated material is one more layer you control.
Common Mistakes to Avoid
- Glow that's too uniform. Use at least two blur radii, wide and tight, so the falloff looks natural.
- A pure white tube. Keep the color visible at the edges and let only the center approach white.
- Overlapping tubes. Break them, or the sign won't look buildable.
- Skipping the environment. Add wall light, reflections, and a darker surround.
- Flattening too early. Keep your layers until the animation is done.
Build the sign with real tube logic, stack your glow in layers, and keep the file organized. The result works as a standalone illustration and gives you a clean starting point for motion work.