How to Make a Multi Colored Brush in Procreate
StyleFrame Team7 min read
To make a multicolored brush in Procreate, duplicate an existing brush, open its Brush Studio, and go to Color Dynamics. Raise Stroke Color Jitter (Hue) so each new stroke starts on a different color, and raise Color Pressure (Hue) so the color shifts as you press harder. Then clear the Drawing Pad and test with a bright, saturated color, since black and white strokes will not change hue. For a controlled two-color blend, use the Secondary Color slider instead. For an outline and fill in a single stroke, combine two brushes into a Dual Brush.
Three Ways a Procreate Brush Can Carry Multiple Colors
"Multicolored" can mean different things, and each meaning uses a different Procreate feature:
- Hue-cycling (rainbow) brush: Color Dynamics shifts hue per stroke, with pressure, or with tilt. The result is random or pressure-driven, not a fixed palette.
- Two-color brush: the Secondary Color setting blends between the two swatches in your color panel as pressure or tilt changes.
- Outline-and-fill brush: a Dual Brush merges two brushes, each with its own shape and settings, so one stroke lays down two looks.
The methods below do not load three or more arbitrary colors into one brush, and they do not simulate physical paint mixing from a multi-pigment palette. If you need exactly three colors tied to pressure, you will likely have to approximate it or build the effect in layers.
Method 1: Build a Hue-Shifting Rainbow Brush
This is the fastest route and works from nearly any brush. Color Dynamics has been available since Procreate 4.2, so update if you are on something older.
Step 1: Duplicate a brush
Open the Brush Library, swipe left on a brush you like, and tap Duplicate. Edit the copy so the original stays intact. If you want a safety net, open the copy's Brush Studio, go to About this brush, and create a reset point so you can roll back after experimenting.
Step 2: Set up the stroke path for smooth color
Rainbow brushes look best when the color transitions read as continuous rather than as separate dabs. In the Stroke Path settings, set Spacing to zero. In Stabilization, raise Streamline to roughly 80%. These are style choices, not requirements, but they give a clean, ribbon-like stroke that makes the hue shift easy to see.
If you want a flatter, calligraphic look, swap the shape source to an oval. In the Shape tab, tap Edit, choose Import, then Source Library, and pick an oval. Confirm with Done.
Step 3: Open Color Dynamics
This is where the color behavior lives. Start by zeroing every slider so you know exactly which setting is causing which effect. Then change two things:
- Stroke Color Jitter, Hue: push this to about 99%. Each new stroke starts on a different hue, so lifting your pencil between letters or marks gives you a new color.
- Color Pressure, Hue: push this to maximum. As you press harder within a stroke, the hue travels further around the wheel. Lower values give a gentle gradient. Higher values give a full spectrum sweep.
Step 4: Test on the Drawing Pad
Tap the Drawing Pad in Brush Studio, clear it, and choose a saturated color in the color panel. Draw a few strokes with varying pressure. Adjust the sliders until the spread feels right, then tap Done.
If your pressure response feels off, check the Apple Pencil section of Brush Studio.
Understanding the Controls
It helps to know what each group of sliders does, because you can mix them:
- Stroke Color Jitter randomizes the starting color per stroke.
- Color Pressure ties the shift to how hard you press within a stroke.
- Color Tilt ties the shift to pencil angle.
- Hue, Saturation, Brightness are the three axes you can move. Hue alone gives you a rainbow. Adding Brightness or Saturation variation gives you a more painterly, organic spread.
A practical approach: keep hue variation high, but keep saturation and brightness variation small if you want the brush to feel intentional. Max everything and you get noise.
Method 2: Make a Two-Color Brush with Secondary Color
If a full rainbow is too unpredictable, Secondary Color gives you control over exactly which two colors appear.
- Duplicate a brush and open Brush Studio, then go to Color Dynamics.
- Reset every slider to zero for a clean slate.
- Under Color Pressure, raise Secondary Color to maximum. Also raise Saturation to maximum.
- Tap Done, open the color panel, and set both swatches at the top right to the colors you want. Most panels except Palettes show these two swatches.
- Draw. Light pressure gives you the primary color and heavier pressure moves toward the secondary.
For tilt control, repeat the same two changes (Secondary Color and Saturation) under Color Tilt. Now angling the pencil also shifts the color, which is handy for shading effects with one brush.
This is the closest Procreate gets to a gradient-driven brush, and it is the better choice for brand palettes, since you can lock in specific colors instead of letting the wheel decide.
Method 3: Make an Outline-and-Fill Brush with Dual Brush
A Dual Brush merges two brushes into one, and you can edit each component separately. That makes it a good way to get two visual layers in one stroke.
- Duplicate a simple brush, such as a monoline, so you have two copies. Put both in the same brush set. Procreate only combines brushes in the same set, and it cannot combine a brush that is already a Dual Brush.
- Edit each copy before combining. Give one a wider shape or a different stroke path so it reads as the outline, and keep the other narrower as the fill. Adjust rendering settings per brush to taste.
- In the Brush Library, tap the first brush to set it as Primary, then swipe to select the Secondary. Tap Combine at the top right.
- Open the new brush in Brush Studio. You will see both components at the top left. Tap one to edit it independently. The Combine Mode works like a layer blend mode and changes how the two brushes mix.
The new brush takes the Primary brush's name, and you can rename it. If it does not behave as you hoped, tap the Secondary preview and choose Uncombine to separate them again.
To get two different colors out of a Dual Brush, you can experiment with Color Dynamics settings on each component.
Troubleshooting Common Problems
- No color change at all: you are probably painting with black or white. Hue shifts have nothing to act on. Pick a saturated color.
- Colors look faded or muddy: the output depends on your starting color. Pastels stay washed out and dark browns or deep purples go muddy. Neon, well-saturated colors give the most vivid result.
- Nothing happens with pressure: Color Pressure depends on pressure input, and some users without an Apple Pencil report that it does not work for them. Try Stroke Color Jitter instead.
- Light-pressure strokes look dull: try raising the Saturation slider under Color Pressure so low-pressure marks stay more vivid.
- Dual Brush will not combine: check that both brushes are in the same set and that neither is already a Dual Brush.
Taking Procreate Brushwork into a Motion Pipeline
For motion designers and animators, a custom multicolor brush is usually a texture generator rather than a final deliverable. Hand-painted color-shifting strokes work well as animated overlays, title treatments, wipes, and stylized mattes. A workable pipeline looks like this:
- Paint on separate layers in Procreate with a transparent background.
- Export layered files or PNGs and bring them into After Effects, Nuke, or Blender.
- Animate, track, or composite them as you would any other element.
Quick Recap
- Rainbow brush: Color Dynamics, with Stroke Color Jitter (Hue) near 99% and Color Pressure (Hue) at max.
- Two controlled colors: Secondary Color and Saturation at max under Color Pressure and, optionally, Color Tilt, with two swatches set in the color panel.
- Outline plus fill: build two brushes, put them in the same set, and combine them into a Dual Brush.
- Always test with a saturated color on the Drawing Pad, and keep an untouched duplicate or reset point as a fallback.
Start with the rainbow method to learn how the sliders behave, then move to Secondary Color once you want palette control. Dual Brush is worth the extra setup when a stroke needs structure as well as color.