How to Make a Moon in Procreate
StyleFrame Team9 min read
To make a moon in Procreate, start with a dark canvas, draw a perfect circle with the Ellipse selection tool, and fill it with a pale gray-blue. Then build the surface on separate layers: soft tonal shading, darker maria (the large dark plains), a textured brush for craters, and a blurred glow around the edge. Keep the moon isolated on its own layers so you can export a transparent PNG or layered PSD and drop it into a composite in After Effects or any other pipeline.
What You Need Before You Start
You don't need a large kit for this. A basic setup is enough:
- Procreate on an iPad with an Apple Pencil (a finger works for the selection and blur steps).
- A canvas sized for your final use. If the moon is going into a 4K comp, start at 3840 × 2160 or larger. A square canvas such as 4096 × 4096 gives you room to crop and scale later.
- A small palette of 5–7 colors. Pick desaturated blue-grays from dark to light, plus one warm off-white for highlights.
- Three brush types: a soft airbrush, a hard round brush for shapes, and one textured brush (a grainy, chalky, or industrial-style brush works well) for surface detail.
Photographic moons are rarely pure gray. They lean slightly warm or cool depending on atmosphere and exposure. Choose your tint now so you don't have to correct it across a dozen layers later.
Step 1: Set Up the Canvas and Background
Create your canvas and fill the background layer with a near-black, such as a very dark navy, rather than pure black. This gives you room for glow and atmospheric falloff to read as light instead of clipping. If you plan to place the moon over a different sky later, you can hide the background layer at export.
Create a new layer above it and name it "Moon Base." Naming layers early pays off when you export a PSD for compositing.
Step 2: Draw a Clean Circle
Open the Selection tool and choose Ellipse. Drag out a circle, then use the transform handles and Snapping to keep it centered and proportional. Fill it by dragging the color swatch into the selection, or tap Fill Layer with the selection active.
An alternative is to draw a circle with a brush and hold at the end of the stroke so QuickShape snaps it to a perfect ellipse. Then tap Edit Shape and choose Circle. Either method works, but the selection method keeps the edge clean and makes masking easier.
Keep the selection active, or save it by turning the base into an Alpha Lock layer. You'll constrain every later shading step to the disc, so edges stay crisp.
Step 3: Block in the Base Tone and Sphere Shading
A flat circle isn't a moon yet. You need it to read as a sphere.
- Alpha Lock the "Moon Base" layer (or put a new layer above it and set it as a Clipping Mask).
- Using the soft airbrush, paint a slightly darker tone around the edges and a lighter tone toward the lit side.
- Keep the transition gradual. The real moon looks surprisingly flat at full phase, so you don't need heavy form shading. For a partial phase, push the shading harder.
If you want a crescent or half moon, create a new layer clipped to the base. Paint the shadow side with a deep blue-black and soften the terminator, the line between light and dark, with a small amount of Gaussian Blur or a soft eraser. The terminator on the real moon isn't a razor edge, because crater walls and mountains catch light unevenly. A slightly broken, irregular boundary looks more convincing than a clean arc.
Step 4: Add the Maria
The dark patches on the moon's face are what make it recognizable. Create a new clipped layer named "Maria."
- Choose a mid-dark gray-blue, just a few steps darker than your base.
- Use a medium soft brush to dab in large, irregular shapes. Think of them as connected lakes with ragged boundaries, not tidy blobs.
- Lower the layer opacity to somewhere between 50% and 70% so the base shows through.
- Smudge or blur the edges lightly so the shapes sit into the surface rather than on top of it.
Reference matters here. Pull up a real lunar photograph, place it in a reference window (Canvas > Reference), and match the general distribution of dark regions. You don't need to copy it exactly, but believable proportions help viewers' eyes accept the shape instantly.
Step 5: Build Craters and Surface Texture
Texture is where most Procreate moons succeed or fail. Work in layers and keep each pass subtle.
Fine grain. On a new clipped layer, use a grainy or chalky brush with a light gray at low opacity. Dab across the disc with varied pressure. Don't cover everything evenly. Leave calmer areas and denser areas.
Large craters. On a separate layer, paint a few key craters with a small hard brush. For each one, draw a dark crescent on the side facing away from the light and a thin bright rim on the side facing it. Keep the light direction consistent with your shading from Step 3. Mismatched crater lighting is the quickest way to make the moon look pasted together.
Ray systems and highlights. Add a few bright, soft streaks radiating from a prominent crater using a small airbrush at low opacity. This reproduces the ejecta rays visible on the real moon.
Detail restraint. Vary crater size dramatically, with a few large ones, more medium ones, and many tiny ones. Keep the contrast of small details low. If you plan to scale the moon down in a final comp, most of that detail will vanish anyway.
Step 6: Fix the Edge and Add Depth
Create a new layer above everything, clipped to the moon, and set it to Multiply or Soft Light. Using a large soft brush with a dark blue-gray, gently darken the outer rim. This is limb darkening, a subtle falloff toward the edge that helps the disc feel like a sphere.
Then check the silhouette. If the edge looks too sharp against the background, apply a very small Gaussian Blur to the moon layers or erase a hair of the boundary with a soft eraser. Only a pixel or two of softness is usually enough at 4K.
Step 7: Build the Glow
Move to a new layer below the moon layers but above the background. Name it "Glow."
- Pick a pale blue or warm off-white, depending on the mood.
- With a very large soft airbrush, paint a halo around the disc.
- Apply a heavy Gaussian Blur to smooth it out.
- Set the layer to Screen or Add (Procreate calls this blend mode Add) and adjust opacity until the glow feels like atmosphere, not a sticker.
A second, tighter glow layer close to the edge combined with a wider, fainter one gives you a more natural falloff than a single halo. If you plan to add glow in After Effects instead, skip this step and keep the moon clean. Compositing glows with Glow effects, Curves, or Lumetri gives you more control over intensity and animation.
Step 8: Color-Grade and Check at Final Size
Group all moon layers into a folder. Use the Adjustments menu (Curves, Color Balance, or Hue/Saturation/Brightness) on the group to shift temperature and contrast without touching individual layers.
Then zoom out to the size the moon will occupy in your final frame. If it is only 300 pixels wide in a 4K shot, the fine texture matters far less than the overall tonal shape and glow. Adjust accordingly instead of polishing details nobody will see.
Exporting the Moon for After Effects and Other Tools
Procreate gives you several useful export options:
- PSD keeps your layers intact. Import it into After Effects as a composition with layers retained, so the glow, maria, and craters remain separate and animatable.
- Transparent PNG is useful for a quick drop-in. Hide the background layer before exporting.
- TIFF is a good choice when you want a higher-quality still without compression artifacts.
Because the moon is built from separate layers, you can animate in After Effects:
- A slow scale or position drift using the Transform properties.
- A subtle glow pulse by animating the opacity of the glow layer.
- Cloud passes by layering fractal noise or painted cloud plates in front with blend modes.
- Parallax against foreground elements for a 2.5D sky.
If your pipeline involves Cinema 4D or Blender, you can also use the painted moon as a color map on a sphere. Keep in mind that a flat painting is not a true spherical map, so there will be distortion at the poles unless you paint in an equirectangular layout.
Taking the Painted Moon Further with Styleframe
A static painting often needs to become motion. Styleframe is an AI video and motion tool aimed at artists who want direction over the result. You can bring a moon you painted in Procreate into a tool like this to explore movement, restyling, or other treatments. Check Styleframe's current documentation for the features and export options it supports.
Procreate stays the place where you art-direct the moon, and your comp stays the place where it gets finished.
Common Mistakes to Avoid
- Pure gray everywhere. Add subtle blue or warm shifts so the surface has life.
- Uniform texture. Real surfaces have clustering and empty areas. Vary density.
- Inconsistent light direction. Check craters, terminator, and glow against one imagined light source.
- Over-detailing small moons. Match detail to final screen size.
- Flattening too early. Keep layers separate until you are sure about the grade and glow.
- Hard-edged glow. Use large brushes and blur so the halo feels atmospheric.
Quick Workflow Summary
- Create a high-resolution canvas with a near-black background.
- Draw a circle with the Ellipse selection and fill it.
- Shade the sphere with clipped, soft layers.
- Paint maria with low-opacity irregular shapes.
- Add craters and grain on separate layers with consistent lighting.
- Darken the limb and soften the edge.
- Build or defer the glow, depending on where you'll finish.
- Export a layered PSD or transparent PNG for compositing and animation.
A convincing moon comes from restraint: believable tonal shapes, consistent light, and layers you can adjust later. Build it that way in Procreate and it becomes a reusable asset for any night sky you need to composite, animate, or restyle.