How to Make a Layered Svg in Procreate
StyleFrame Team7 min read
Procreate can't export SVG directly, so a layered SVG is a two-stage job. Draw each color or moving part on its own Procreate layer, export those layers as transparent PNGs with Share > Share Layers, then vectorize each PNG in Illustrator, Inkscape, or a web tracer such as SVG Trace. Stack the traced results as separate groups or layers in one file and save it as SVG (or AI).
Why Procreate Can't Hand You a Finished SVG
Procreate is a raster painting app. Its layers hold pixels, and its export options are formats like PNG and JPG. Every Procreate-to-SVG method therefore has the same shape: build clean layered raster art, export the layers separately, then convert pixels to vector paths in a second app.
This matters more if you animate than if you cut vinyl. A flattened trace gives you one blob of paths. A properly layered trace gives you separate shapes you can parent, rig, offset, and keyframe in After Effects, Blender, or Cinema 4D. Most of the work is planning your layers before you draw.
Step 1: Set Up the Canvas
- Pick a generous canvas. Tracing quality depends on source resolution. A square canvas around 3000 × 3000 px is a sensible starting point, and you can go larger if your device allows it.
- Match your destination aspect ratio. If the art is headed for a 16:9 comp, set up a canvas with that ratio so you aren't cropping after the trace.
- Keep the background on its own layer. You'll hide it before export so each PNG has transparency.
Step 2: Draw for Vectorization, Not for Painting
Vector tracing rewards simple art. Textured brushes, soft gradients, and heavy shading turn into noisy, bloated paths. For tracing:
- Use flat fills and clean edges. A monoline or hard-edged brush traces far better than a grainy one.
- One color or one movable part per layer. If an arm will swing independently, it gets its own layer. If two shapes share a flat color but will never move separately, you can merge them.
- Overlap shapes slightly. Extend fills beneath neighboring shapes so tiny gaps don't appear when you move pieces apart later.
- Sketch first, then ink. Drop the sketch layer's opacity, draw clean shapes on new layers above it, and hide the sketch before export.
- Name your layers. The exported files inherit your naming, which saves a lot of confusion once you have 20 PNGs in a folder.
Every bump in your line work will show up as a bump in the vector, so smooth your strokes now. Stroke-smoothing and stabilization settings can help here.
Step 3: Export the Layers as Transparent PNGs
- Hide the background layer, and any sketch or reference layers you don't want traced.
- Open the Actions menu (wrench icon) and choose Share.
- Select Share Layers, not Share Image.
- Choose PNG.
- Send the files to your computer via AirDrop, cloud storage, or email.
Each visible layer arrives as its own PNG at the full canvas size. Because every file shares the same dimensions, the pieces line up exactly when you place them at the same origin. Don't crop them in between, or you'll lose that built-in registration.
Step 4: Vectorize Each Layer
You have three common routes. All work, and each has trade-offs.
Illustrator: Image Trace
Place each PNG in its own layer, then run Image Trace. For flat, single-color layers, the Black and White mode with a tuned threshold usually gives the cleanest path. Expand the trace, remove any white fill, and apply the intended color. Tracing each layer separately and recoloring it often beats tracing a merged image in color mode, because shapes keep their exact boundaries.
Inkscape: Trace Bitmap (free)
Drag the PNGs into Inkscape, accepting the default import settings, and run its bitmap trace function on each. Reduce stray nodes with a simplify command, then clean up manually. It's a solid free option for creating SVG files.
SVG Trace (web-based)
A browser-based tracer is the quickest route for simple art. You upload a PNG, tune the settings, and download the vector. The catch is that you'll run it once per layer and then recombine the results in an editor, so a browser tracer alone won't give you one tidy layered file.
For animation work, I'd lean toward Illustrator or Inkscape, because you need an editor anyway to assemble and tidy the final file.
Step 5: Assemble the Layered File
- Create a new document matching your Procreate canvas dimensions.
- Paste or place each traced result on its own layer, aligned to the same top-left origin.
- Order the layers to match your Procreate stack.
- Rename layers and groups so they carry over into your animation app.
- Check for gaps between pieces and fix them by adjusting the paths or adding an underlay shape.
- Save as SVG for web or general use, or as AI if your animation app prefers it.
Check your export settings so layers or groups survive. Some SVG exporters flatten or restructure the hierarchy, so open the saved file again to confirm the structure held.
A Shortcut: Splitting a Flat Image Into Layers
If your art exists as a single flat layer, whether imported or already painted, you can still separate it for tracing. The approach: use Procreate's Reference feature to display the flat image while you build new layers over it, filling each color region on its own layer. Another route is selecting color areas on the flat layer, copying them to new layers, and cleaning up the edges. It takes patience, but it gets you per-color layers without redrawing.
Bringing the Layered Vector Into Motion Work
After Effects
Once your layered vector file is in your animation app, you can animate each piece separately. SVG import support depends on your After Effects version, so if your build doesn't read SVG cleanly, try saving an AI file from Illustrator instead.
Blender and Cinema 4D
In 3D apps, clean paths with few nodes generally extrude much better than noisy traces, which is one more reason to keep Procreate art simple.
Pivot Points and Rigging
Decide on your joints before you trace. Overlap shapes at elbows, knees, and hinges so rotation doesn't expose gaps, and set anchor points deliberately after import.
Troubleshooting Common Problems
- Jagged or lumpy edges: your source resolution was too low or your strokes were shaky. Redraw at a larger canvas size or smooth the vector paths after tracing.
- Too many nodes: lower the trace detail, or use a simplify command, then fix any distortion by hand.
- Halos or white fringes: these come from anti-aliased edge pixels. Use a threshold-based trace and delete leftover white shapes.
- Layers drift out of alignment: you cropped or resized an export. Re-place each PNG at the original canvas size and origin.
- Colors look wrong after tracing: in Black and White mode, the trace is just a shape. Reapply your fill colors from the original palette.
Where Styleframe Fits
An SVG route makes sense when your art is flat and graphic, and you want infinitely scalable shapes to rig. It makes less sense for painterly, textured, or heavily shaded Procreate work, because tracing strips out exactly what makes that art interesting.
For that kind of work, offers a different path. It's an AI video and motion tool built around artist control rather than one-click output. You can bring your Procreate frames in as keyframes and use Frames-to-Video to generate motion between them. Restyle and Ink-and-Paint apply a reference-driven style to footage or frames, 2D-to-3D and Turntable extend a drawing into dimensional views, and Remove Background and 4K Upscale prepare the result for compositing. Every generation is driven by your reference images, clips, and keyframes, and iteration is non-destructive, so you can keep refining without losing earlier versions.
It outputs raster 4K and exports image sequences, so it slots into the same After Effects or Nuke compositing workflow you already use, and an After Effects plugin is on the way. It isn't a replacement for a layered vector file when you need to rig shapes, but it's a useful companion when the look of the original illustration matters more than path-level control.
Quick Checklist
- Large canvas, matching your target aspect ratio
- Flat shapes, clean strokes, one movable part per layer
- Background and sketch layers hidden before export
- Share Layers as PNG, never cropped
- Trace each layer separately, then recolor
- Assemble in a new document at the same origin
- Save as SVG or AI, and re-open the file to verify layers survived
Follow those steps and you'll end up with a layered vector file built from your Procreate drawing, ready to rig and animate in your compositing or 3D app of choice.