How to Make a Large Welcome Sign on Procreate
StyleFrame Team8 min read
To make a large welcome sign in Procreate, create a custom canvas at the sign's final physical size, work in RGB or CMYK depending on your printer, and build the design in separate layers for lettering, decoration, and background. Sketch the layout first, letter with the Monoline brush or a font through the text tool, add depth with duplicated and blurred layers, then export a high-resolution PNG, PDF, or layered PSD. For a printed sign, check your canvas against the print shop's resolution requirements before you start. For an animated welcome screen or video title, export the layers and build the motion in After Effects.
Decide What "Large" Means Before You Open Procreate
Procreate is raster-based, so the canvas size you choose at the start is the maximum quality you can get. Changing it later means resampling, which softens edges on lettering.
Work out three things first:
- Final dimensions. Welcome signs come in many sizes; 24×36 inches (portrait) or 36×24 (landscape) are examples. Event banners and backdrops can be much larger.
- Viewing distance. A sign read from several feet away does not need the same pixel density as a print held in your hands. Many large-format printers accept lower resolutions for big pieces, but confirm their requirements rather than guessing.
- Final use. A physical print, a digital screen at an event, and a video title card all have different resolution and color needs.
For a 24×36 inch sign at 300 DPI, you need 7200×10800 pixels. That is a heavy canvas for an iPad. Larger canvases generally leave room for fewer layers, so keep an eye on your layer count. A 150 DPI canvas (3600×5400) gives you more room for layers, and it is often enough for a sign viewed from a distance.
Set Up the Canvas
- In the Procreate gallery, tap the + icon and choose Custom canvas (the folded-corner icon).
- Set units to inches or millimeters, then enter your width and height.
- Set DPI to your target. Keep your layer needs in mind as you adjust.
- Choose a color profile. RGB is fine for screens and most print shops. If your printer asks for CMYK, use a CMYK profile from the start so colors don't shift at export.
- Name the canvas and create it.
If the layer count is too low for the way you work, drop the DPI before you drop the design complexity. You can always upscale reference art or finished output separately.
Plan the Layout With Rough Sketches
Large signs fail more often from weak hierarchy than from weak rendering. Before you commit to final lettering, block out the composition on a low-opacity sketch layer.
- Make "Welcome" the clear primary element. It should be readable from the farthest point where guests will see it.
- Limit secondary text. Names, dates, or a short line like "to our celebration" should be visibly smaller and quieter.
- Reserve margins. Leave at least a few inches of safe space around the edges in case of trimming or framing.
- Use drawing guides. Go to Actions > Canvas > Drawing Guide > Edit Drawing Guide and set up a grid or symmetry guide. Symmetry is useful for centered, formal layouts.
Don't worry about polish at this stage. The sketch only needs to tell you where each element sits and how big it is.
Create the Lettering
You have three practical options, and you can combine them.
Hand lettering
The Monoline brush (in the Calligraphy set) gives clean, even strokes suited to script and sign-painter styles. Letter on a new layer above your sketch, and zoom in to keep curves smooth. Use StreamLine in the brush settings to stabilize wobbly lines, which matters more on a big canvas where long strokes show every hesitation.
Fonts through the text tool
Tap Actions > Add > Add text to type with installed fonts. This is the fastest route to crisp, consistent lettering. When you want to alter the letterforms, such as extending a swash or merging letters, tap the text and choose Rasterize, then edit it like any other layer.
Hybrid
Set the word in a font, then trace over it on a separate layer with your own modifications. You keep the structure and add handmade character.
Keep each major element on its own layer or layer group: "Welcome," secondary text, flourishes, and background. When the client asks to move the date, you won't have to repaint anything.
Add Depth and Effects
Flat lettering can look thin at large sizes. A few techniques add weight without clutter.
Drop shadow. Duplicate the lettering layer, fill it with a dark color (use Alpha Lock), apply a Gaussian Blur from the Adjustments menu, and offset it slightly down and to the right. Reduce the opacity until it's subtle.
Dimensional layers. Duplicate the lettering several times, offset each copy by a few pixels in one direction, and fill with a darker tone to fake an extruded edge. Merge them behind the top layer.
Neon glow. Duplicate the text layer a few times. Leave one in the base color, blur another heavily and set it to a lighter blend mode for the glow, blur a third lightly for a tighter halo, and put a thin near-white version on top for the tube core. Place it over a darkened background so the glow reads.
Marquee bulbs. Place small circles along letter edges with a hard round brush, then add a light highlight and a soft glow layer. Use the QuickShape or a symmetry guide to keep spacing consistent.
Texture. Apply a grain or noise brush at low opacity, clipped to the lettering. This breaks up the digital smoothness that becomes obvious when a design is blown up to poster size.
Keep an eye on your layer count as you add these. Merge finished effect layers into a single layer once you're sure of the look, but save a duplicate of the file first.
Check Legibility Before Exporting
Zoom out until the canvas fits a small portion of the screen. This simulates viewing distance. If "Welcome" doesn't read instantly, increase contrast or weight. Also check:
- Color contrast between lettering and background, especially for pastel palettes.
- Spacing between letters (kerning), since hand-lettered words often have uneven gaps.
- Whether decorative elements compete with the main word.
Flip the canvas horizontally (Actions > Canvas > Flip horizontal) to spot lopsided shapes you've gone blind to.
Export for Print or Screen
Go to Actions > Share and choose the format that suits the next step:
- PNG for lossless output with transparency, good for screens and many print shops.
- PDF for print; confirm which format your printer prefers. Pick the highest quality option.
- TIFF if the printer asks for it.
- PSD if you want to keep layers for editing in Photoshop or to animate in After Effects.
Before sending a file, look at it at 100% zoom in an image viewer to confirm edges are sharp. If the printer needs a particular color profile or bleed, set it up before sending the final file. Extend your background past the trim line by building that extra margin into the canvas from the start.
Turn the Sign Into Motion
For motion designers, a Procreate welcome sign is often a starting asset, not a final deliverable. It might become an event-opening animation, a wedding video title, a lobby screen loop, or a stylized lower third.
Bring layers into After Effects
Export a layered PSD and import it as a Composition – Retain Layer Sizes. Each Procreate layer becomes an After Effects layer you can animate independently. Common treatments include:
- Trim-path-style reveals using a mask or track matte on script lettering.
- Staggered scale and opacity animation for individual letters.
- Flicker and glow animation on neon layers using expressions or Glow effects.
- Parallax between the background, lettering, and decorative layers using a 3D camera.
Make sure the canvas aspect ratio matches your delivery format. A portrait 24×36 sign won't fit a 16:9 timeline without reframing, so consider creating a second, landscape version of the layout.
Troubleshooting Common Problems
Procreate says you've reached the layer limit. Merge completed groups, lower the canvas DPI for a new version, or split the design into separate files for lettering and background.
Lettering looks pixelated in print. The canvas was probably too small for the print size. Rebuild at the correct dimensions, or ask the printer whether vectorizing the lettering is an option.
Colors look dull after printing. Screens display more saturated colors than most print processes. Ask the printer for a proof and consider a CMYK canvas for future projects.
The app slows down. Close other apps, save and reopen the file, and avoid huge soft brushes at the maximum size. Blur effects on large layers are especially demanding.
The design reads poorly from far away. Increase the weight and contrast of the main word, remove thin decorative strokes, and simplify the background.
Final Checklist
- Canvas matches the physical size and resolution target
- Layout sketched with clear hierarchy
- Lettering on separate layers
- Effects applied and checked at a reduced view
- File exported in the printer's preferred format, with bleed if required
- Layered PSD saved if the sign will be animated
Get the canvas size and layer structure right at the start and everything after it, from the print run to the After Effects animation, gets easier.