How to Make a Large Sign on Procreate
StyleFrame Team8 min read
To make a large sign in Procreate, create a custom canvas at the sign's intended physical size (or a proportional scale) and a modest DPI, then build the lettering, depth, and lighting on separate layers. Procreate is raster-based, so the canvas size you choose before drawing sets the ceiling on sharpness, and you can't scale up later without softening. When the design is done, export a flattened PNG or PDF for print, or a layered PSD if the sign is going into After Effects to be animated.
What "Large Sign" Means in Procreate
The phrase covers two jobs, and they set up differently.
- A physical sign: a banner, shop window graphic, or event backdrop. The sign will be printed at a large size, so resolution and aspect ratio come first.
- A big sign illustration: a neon, marquee, or retro sign that fills the frame of a poster, title card, or video background. Pixel dimensions matter, but composition, lighting, and layer organization matter more.
Motion designers usually need the second one, sometimes with the first as a bonus. Decide which you're doing before you open the canvas, because it determines the numbers in the next step.
Step 1: Set Up the Canvas
In the Gallery, tap the plus icon and choose a custom canvas. Procreate lets you set custom canvas dimensions and DPI.
For print:
- Enter the final physical size, or a smaller size in the same aspect ratio if the sign is very large. A scaled-down canvas is often the practical choice.
- Large-format prints are viewed from a distance, so they don't need the 300 DPI you'd use for a flyer. Ask your print shop for their recommended DPI at final size, then work backward to the pixel dimensions.
- Keep the aspect ratio identical to the final piece so nothing gets cropped.
For video or motion:
- Match your composition. A 3840 × 2160 canvas suits a UHD frame. If you plan to pan or push in on the sign, make the canvas larger than the frame so you have room to move.
- Keep your color settings consistent with your After Effects project, since a mismatch can shift colors.
The Layer Trade-Off
Canvas size and layer count are linked. Procreate limits the number of layers based on your canvas size and your device, and a bigger canvas generally means fewer layers. The device also limits maximum canvas dimensions. After you create the canvas, check how many layers it allows. If a sign needs 40 layers (outlines, fills, shadows, bulbs, glow), a canvas that allows far fewer will frustrate you halfway through.
If you hit the limit, drop the canvas size slightly or plan to build the design in pieces and combine them later.
Step 2: Gather References and Sketch
Look at real signs before you draw. Photograph signage in your neighborhood or collect references online, and decide which type you're making. Neon, marquee bulbs, painted wood, and metal-and-plastic cabinet signs each have different construction rules.
If you're doing neon, keep the physical limits in mind so it looks believable:
- Each glass tube is a continuous run with open ends, so a letter like "O" needs a visible gap rather than a closed loop.
- Glass can't make very tight angles, so sharp corners should be rounded.
- Tubes are drawn as a single line weight, so consistency reads as authentic.
Sketch several compositions on a low-opacity layer. Rough, ugly thumbnails are fine. Their job is to let you test layouts, such as a vertical stack for short words or a wide horizontal layout for a storefront, before you commit pixels. Draw more than one option and pick the strongest, rather than polishing the first idea.
Step 3: Build the Lettering and Shapes
Work on a dark background with a light brush to judge line weight. For clean, consistent strokes, Procreate's Monoline brush (in the Calligraphy set) is a good fit for neon tubes and retro script. Slight wobble in a hand-drawn line can actually help, since real neon is bent by hand.
Some habits that make large signs easier to edit:
- Draw complete shapes, even hidden ones. If an oval sits behind a word, draw the whole oval. Moving elements and casting shadows becomes much simpler.
- Separate by function. Keep outlines, fills, shadows, and lights on their own layers, and group related layers into folders with clear names.
- Use clipping masks for shading and texture. A clipped layer only shows on the content of the layer below, so you can paint shadows or grain without touching the base shape and edit them later.
- Use shape and symmetry tools for clean geometry. Straight edges, circles, and mirrored layouts are easier to keep clean on a large canvas.
- Keep stroke weight proportional. Remember the scale of the finished sign. Effects such as glow will make strokes look thicker later, so draw a bit thinner than your gut says.
Step 4: Add Depth, Color, and Light
A flat outline doesn't look like a sign. Depth and lighting do the work.
Dimension
For marquee or channel-letter styles, duplicate the letter layer, offset it, and darken it to build an extruded side. Fill the gap with a connecting layer. Add a clipped shadow layer on the face of each letter, and a cast shadow on the wall or backing panel.
Color
Pick a limited palette before you fill. Retro signs work well with a handful of saturated colors plus one dark neutral. Use Procreate's color palettes to save the set so every layer pulls from the same swatches.
Glow and Bulbs
For neon:
- Duplicate your tube layer and blur the duplicate.
- Set the blur layer to a blend mode that brightens, so it reads as emitted light.
- Stack a second, wider blur at lower opacity for atmospheric falloff.
- Keep a thin, near-white core on top of the colored stroke so the tube looks lit from inside.
For bulbs, paint small circles on a dedicated layer, add a bright center, and use a soft brush on a separate glow layer for the halo. Putting bulbs on their own layer matters: you can later switch them on and off, which is useful for animation.
Some neon tutorials finish the piece in Photoshop, but you can build a convincing glow from stacked blurred layers.
Step 5: Export for Print or Motion
Export from the Actions menu (Share). The right format depends on the destination:
- PNG: a flat image, good for review and general use.
- PSD: a layered format to use if you'll continue in Photoshop or After Effects.
- PDF: a possible handoff to print shops. Remember that the contents are still raster pixels, not vectors.
- TIFF or JPEG: for specific printing workflows or quick previews.
Before exporting, hide any guide or sketch layers, and name your layers so they make sense to the next person, including you in three weeks. If a printer asks for vector artwork (for cut vinyl, for example), Procreate won't produce it directly. You'd need to trace the design in a vector tool.
Taking the Sign Into Motion
If the sign is destined for a title sequence, a lower third background, or a looping scene, treat the Procreate file as a layered asset rather than a finished image. Import the PSD into After Effects as a composition with layers retained, then:
- Animate the glow layers' opacity for a flicker.
- Turn bulb layers on in sequence for a chase effect.
- Apply slight camera moves or parallax across the extrusion, face, and shadow layers.
You can also use an AI tool for motion that would be tedious to hand-animate. Your Procreate layers stay the source of truth for the design, and the compositing stays in your hands.
Common Mistakes to Avoid
- Starting too small. Enlarging a raster canvas later makes edges soft. Size up front.
- Ignoring the layer cap. Check how many layers your canvas allows before building a complex design.
- Merging too early. Flattening outlines, fills, and glow together removes your ability to recolor or animate.
- Unrealistic neon. Closed loops, razor-sharp corners, and mixed line weights break the illusion.
- Wrong color profile. Colors can look different in print or After Effects than on the iPad if profiles don't match.
- Assuming a PDF is vector. A PDF from Procreate holds raster pixels.
Quick Checklist
- Decide: print sign or sign illustration for video.
- Create a custom canvas at the correct size, DPI, and aspect ratio.
- Check the layer limit.
- Collect references and draw several thumbnails.
- Build lettering with the Monoline brush on organized layers.
- Add dimension, a restricted palette, and stacked glow layers.
- Name and group layers, then export PSD, PNG, or PDF.
- For motion, import the layered file into After Effects and animate the lights, glow, and camera.
A large sign in Procreate comes down to planning the canvas, keeping the file organized, and building lighting in layers. Get those right, and the same artwork serves a print shop, a poster, or a motion piece.