How to Make a Hexagon in Procreate
StyleFrame Team8 min read
To make a hexagon in Procreate, turn on the Isometric Drawing Guide with Drawing Assist and trace six equal edges along the 30°, 90°, and 150° guide lines. For a quicker sketch, draw a six-cornered closed shape and hold your Apple Pencil down so QuickShape snaps it, then check the side lengths by eye. Procreate lacks the precision of vector software, so for pixel-exact shapes, grids, or repeats, build the hexagon in a vector or After Effects shape layer and import it as a high-resolution PNG.
The three approaches at a glance
Artists building hexagon grids for maps or patterns tend to run into the same wall: Procreate is a raster painting app, so it won't hold a regular hexagon to exact proportions on its own. The methods below work around that.
Method 1: Draw a hexagon with QuickShape
QuickShape is the fastest route when the hexagon is part of an illustration and doesn't need to be mathematically perfect.
- Create a new layer and pick a hard, round brush.
- Draw a closed six-sided outline with straight edges. Place your six corners roughly evenly around an imaginary circle.
- Finish the stroke at the starting point and keep your Pencil or finger held on the screen.
- After a brief pause, Procreate snaps the stroke into a clean straight-edged shape.
- If an Edit Shape option appears at the top of the canvas, use it to nudge the corner points. Not every snapped shape is editable, so don't count on it.
QuickShape follows the corners you drew. It doesn't force equal sides or equal angles, so a sloppy placement gives you a slightly lopsided hexagon. That's fine for a sticker or a rough layout, but it's a problem if you plan to tile the shape.
Tip: Draw the first stroke slowly and place corners deliberately. Zoom out to check the overall silhouette before you commit.
Method 2: Use the Isometric Drawing Guide for a regular hexagon
This is the best fully native option. A regular hexagon has edges at 60° increments, and the isometric grid's lines sit at 30°, 90°, and 150°. Those are exactly the angles a pointy-top hexagon needs.
Set up the guide
- Open Actions (wrench) > Canvas and switch on Drawing Guide.
- Tap Edit Drawing Guide and choose Isometric.
- Adjust the grid size so intersections are comfortably spaced. A larger grid size makes a larger hexagon.
- Create a new layer, tap it, and enable Drawing Assist. Strokes on that layer now snap to the guide lines.
Draw the shape
- Pick a start point on a grid intersection.
- Draw a line up along the vertical guide, then lines along the angled guides, counting the same number of grid units for each edge.
- Close the shape back at the starting intersection.
Because every edge spans the same number of grid cells, all six sides come out equal. Another way to think about it is an isometric cube viewed head-on. The cube's outer silhouette is a regular hexagon, so you can outline a cube and delete the inner lines.
Get a flat-top hexagon
Isometric drawing gives you a pointy-top hexagon with vertical sides. For a flat-top version, select the layer and rotate it with Transform. With Snapping enabled, rotation jumps in fixed increments, so you can land on a 30° or 90° turn cleanly. Either rotation turns a pointy-top hexagon flat-top.
Method 3: Import a precise hexagon from vector or After Effects
If you're a motion designer, you already have a precise hexagon generator open most days. In After Effects, add a Polygon from the shape layer's Add menu, set Points to 6, and set the outer radius. Illustrator and other vector tools have equivalent polygon tools.
Then:
- Export the shape as a transparent PNG at a size much larger than you'll need.
- In Procreate, use Actions > Add > Insert a photo (or Insert a file) to bring it in.
- Scale it down, never up.
The scaling rule matters. Raster layers lose sharpness when enlarged, and repeated resizing compounds the softness. Starting big and reducing keeps edges crisp. This is also the approach some experienced Procreate users recommend for hexagon grids. Vector software gives you precise, editable geometry, and Procreate handles the painting, texturing, and finishing.
Getting the proportions right
Whatever method you use, it helps to know the geometry. For a regular hexagon with side length s:
- Pointy-top: height = 2 × s, width ≈ 1.732 × s
- Flat-top: width = 2 × s, height ≈ 1.732 × s
That 1.732 factor is the square root of 3. If your hexagon's width-to-height ratio is noticeably off from 0.866 (pointy-top) or 1.155 (flat-top), your sides aren't equal.
Pick a side length that gives whole-pixel dimensions where possible, or at least that rounds with minimal error. Fractional pixel widths cause hairline gaps in tiled patterns. If the numbers won't come out clean, work larger and downsample at the end.
Fill, stroke, and clean up
Once you have an outline:
- Fill it: Drag the color from the top-right color disc into the shape (ColorDrop). If the fill leaves a fringe at the edge, raise the ColorDrop threshold slightly or increase it by dragging before releasing.
- Keep edges clean: Use Alpha Lock on the fill layer so later texture and shading stay inside the hexagon.
- Make a stroke-only hexagon: Use the Selection tool to select the shape, then stroke along the selection with a brush on a new layer. Or simply trace your outline on its own layer, separate from the fill.
- Smooth hand-drawn lines: Raise the brush's StreamLine setting in Brush Studio, or use a higher stabilization value. This helps when you're drawing freehand without Drawing Assist.
Keep the outline, fill, and shading on separate layers. If the hexagon needs to change size or color later, you'll avoid redrawing it.
Hexagon patterns and grids
Procreate can display grids, but its built-in 2D Grid is square, not hexagonal. Several practical options exist:
- Hex brush stamps: Convenient for loose sketching, but alignment depends on painting in a single stroke. Scaling the brush changes the cell size and can break alignment.
- Duplicate and snap: Build one hexagon, duplicate the layer, and drag copies into place with Snapping and Magnetics on. This works for small clusters. Row offsets for a pointy-top layout are half a hexagon width, with row spacing of 1.5 × s.
- Tile in vector, paint in Procreate: Generate the full grid in a vector app or After Effects, export it as a high-res PNG, and use it as a reference layer or a base to paint over. For finished maps or exact repeats, this is the more reliable path.
For repeating pattern work, a pointy-top hex tile repeats cleanly in a rectangle that's 1.732 × s wide and 3 × s tall. The second row sits offset by half the width. Building the tile at exact dimensions keeps it seamless.
Common problems and fixes
- Sides look uneven: QuickShape followed your corners. Redo it with Drawing Assist on the isometric guide.
- Edges are blurry: You enlarged a raster layer. Redraw or re-import at a larger size and scale down instead.
- Hexagons don't line up in a grid: The shapes were placed by eye or brushed at different scales. Use a vector-built grid or Snapping.
- Strokes won't snap to the guide: Drawing Assist is a per-layer setting. Check that it's enabled on the active layer.
- The shape is pointy-top when you need flat-top: Rotate the layer with snapping, as above.
Taking Procreate hexagons into a motion pipeline
A hexagon drawn in Procreate usually ends up as an element in a bigger piece: a title design, a UI backdrop, a sci-fi graphic, or a texture pass. A few habits make that handoff easier:
- Export layers deliberately. Save the artwork as a PSD to keep layer structure, or export flattened PNGs with transparency for individual elements.
- Match your comp resolution. Paint at or above your final comp size. Hexagon edges are unforgiving when scaled.
- Decide what stays vector. If the hexagon will be animated by scale, rotation, or trim paths, keep a native shape layer in After Effects and use the Procreate art as texture or overlay.
- Use Procreate for the hand-made look. Rough edges, ink bleed, and uneven fills are hard to fake procedurally and easy to paint.
Where Styleframe fits
Once you have a hexagon design you like, the next question is often how to bring it to life without abandoning the look you've built. is an AI video and motion tool that can be used to generate and stylize material from your own reference images. It's an extra tool, not a replacement for your comp.
Quick recap
For a quick, loose hexagon, use QuickShape. For a regular, clean one drawn natively, use the Isometric Drawing Guide with Drawing Assist. For anything that has to tile, align, or match exact dimensions, build it as a vector or After Effects shape, import it large, and paint on top in Procreate. Know the 1.732 ratio, keep layers separate, and avoid upscaling raster art, and your hexagons will hold up in the final composite.