How to Make a Heart Brush in Procreate
StyleFrame Team9 min read
To make a heart brush in Procreate, draw a symmetrical black heart on a square canvas, copy it, and paste it into a new brush's Shape Source in Brush Studio. Invert the shape so the heart is white on black, raise the stroke spacing so each tap lays down a separate heart, and turn off Apple Pencil opacity pressure so every stamp renders at full strength. Add Stamp Color Jitter if you want each heart to shift slightly in hue.
This guide walks through the full process, the settings that matter most, and how to carry the finished stamp into motion work in After Effects and other compositing tools.
What you need before you start
- An iPad running Procreate (the steps below follow the Procreate 5 interface)
- An Apple Pencil, or a capable stylus. A finger works for stamps, but pencil pressure gives you more control over the shape's size.
- About ten minutes
If you only need a heart shape in a motion project, you can draw one directly in After Effects with a shape layer. A custom Procreate brush is more useful when you want hand-drawn variation: scattered hearts, textured stamps, or illustrated elements that feel less geometric than a vector.
Step 1: Draw a symmetrical heart
A brush stamp is only as clean as its source shape, so symmetry matters.
- Create a new square canvas. Square avoids distortion when Procreate turns the artwork into a stamp.
- Set your color to pure black (hex #000000) in the Value tab of the color panel.
- Choose a simple, even-width brush. The Monoline brush in the Calligraphy set works well.
- Open the Actions menu (the wrench), go to Canvas, and switch on Drawing Guide. Tap Edit Drawing Guide, choose Symmetry, and open Options. Select Vertical symmetry, leave Rotational off, and turn Assisted Drawing on. Tap Done.
- Set brush opacity to 100%, and use a moderate size. Starting around 20% size gives a solid outline.
- Starting at the top center, draw half of the heart. The other half mirrors automatically.
If you want a filled heart instead of an outline, fill it with ColorDrop after drawing the outline. Drag the black color into the closed shape. For brush stamps, a filled heart usually reads better at small sizes, while an outline heart works well as a decorative accent.
Center and scale the shape
Use the Transform tool (the arrow) with Uniform selected to center the heart and scale it up so it fills most of the canvas. A larger source shape gives you a sharper stamp when you paint at big sizes. Leave a small margin around the edges so the shape does not get clipped.
Step 2: Copy the canvas
Open the Actions menu, tap Add, and choose Copy Canvas. This puts the whole canvas on your clipboard, which you will paste into the brush editor.
Step 3: Create a new brush
- Open the Brush Library and scroll to the top of the list.
- Tap the plus icon to create a new brush set. Name it something like "Hearts" so custom brushes stay separate from the defaults.
- With the new set selected, tap the plus icon at the top right of the Brush Library to add a new brush to that set. This opens Brush Studio.
Step 4: Set the heart as the brush shape
In Brush Studio, the Shape tab controls the stamp itself. The Grain tab controls texture inside the stamp. For a heart, you want to edit the shape.
- Tap Shape in the left sidebar.
- Next to Shape Source, tap Edit.
- Tap Import, then Paste, to bring in the copied canvas.
- Invert the shape with a two-finger tap on the heart. Procreate reads white as painted area and black as empty area, so the heart should end up white on a black background.
- Tap Done.
If your stamp comes out as a heart-shaped hole in a solid block, the shape is not inverted. Return to the Shape Editor and invert it again.
Step 5: Tune the stroke so it behaves like a stamp
Now make the brush place one heart per touch, or a clean row of hearts, instead of a smeared line.
Stroke path
Open Stroke Path and increase Spacing. At the maximum, each heart lands as its own separate stamp. A lower value overlaps the hearts into a ribbon-like stroke, which can be a useful effect, but it is not a stamp. Jitter settings in this panel add random offsets, which scatter the hearts for confetti or particle-style textures.
Apple Pencil response
Under Apple Pencil, check Opacity. By default, pressure changes how transparent the stamp is. For consistent hearts, reduce that pressure response to none.
Size limits
Under Properties, open the Brush Behavior section and set the Maximum Size and Minimum Size. These define the range your brush can reach with the size slider. A wide range lets you use the same brush for tiny background accents and large hero hearts. Set a minimum that stays legible. If it becomes too small, stamps turn into specks.
Rotation (optional)
If you want hearts tilted at random angles, look at the rotation and jitter controls in Stroke Path or Shape. Random rotation helps a scattered pattern feel hand-placed. If you want them all upright, leave rotation off.
Step 6: Add color variation (optional)
If you use a single color, you can skip this step. For multicolor hearts:
- Open Color Dynamics.
- Under Stamp Color Jitter, raise Hue. A value around 30% shifts each heart slightly from your chosen color.
- Add Saturation or Brightness jitter if you want more variation in tone.
Use small values for a cohesive palette, and larger values if you want rainbow-style variety. Test on a blank canvas and adjust until the result matches your design.
Step 7: Name, test, and refine
Open the Brush Studio's About this brush section to name the brush and set a stamp preview. Then paint on a blank layer.
Check these things:
- Edge quality: If hearts look soft, your source shape may be too small or blurry. Redraw it larger.
- Spacing: Is each heart distinct, or overlapping?
- Size range: Do the smallest hearts still read clearly?
- Pressure behavior: Does pressure change only what you intend it to change?
Save changes with Done. You can duplicate the brush and make variations, such as an outline heart, a rounded heart, or a version with jitter for scatter.
Common problems and fixes
The brush paints a square block. The source image probably has a solid white or black background that was not inverted correctly. Re-open the Shape Editor and check that the heart is white against black.
The hearts look pixelated. Redraw the source on a larger canvas, or scale the heart larger within the square before copying.
Stamps are faint and inconsistent. Pencil pressure is still affecting opacity. Set that response to none in Apple Pencil settings.
Hearts overlap into a chain. Increase Spacing in Stroke Path.
Colors do not change. Color Dynamics settings need to be applied under Stamp Color Jitter. Other jitter options affect stroke behavior differently.
Using your heart brush in a motion workflow
A Procreate brush is a 2D illustration tool, but the artwork it produces can move into a motion pipeline easily.
Export with transparency. Hide the background color layer, then export as PNG to keep the alpha channel. You can also export a layered PSD, which After Effects and Photoshop open with layers intact, so you can animate hearts independently.
Animate with Animation Assist. Procreate's Animation Assist mode lets you hand-draw frame-by-frame animation, such as a heart pulsing or sparkles bursting. You can export those frames as a PNG sequence, which After Effects imports as a footage sequence.
Build particle-like elements. Paint a few dozen varied hearts on one layer, export them, and slice them into separate layers, or use them as sprites in a particle system. Hand-drawn variation helps reduce the repeated look that shows up when you duplicate one vector shape.
Texture for 3D. In Cinema 4D or Blender, a transparent PNG of painted hearts can serve as a decal, an alpha map, or a texture on a surface.
Where Styleframe fits after Procreate
Once you have a set of hand-drawn heart assets or a keyframe illustration, the next problem is often motion and style consistency, not drawing. This is where can sit alongside your existing tools. It is an AI video and motion tool built for artistic control rather than one-click output, and every generation is driven by your own references: images, video clips, and keyframes.
A few practical uses for a Procreate-based workflow:
- Frames-to-Video: Use two or more of your illustrated keyframes, such as a heart in its resting pose and one fully expanded, and let Styleframe generate the motion between them, with you controlling the start and end frames.
- Restyle and Ink-and-Paint: Use your Procreate artwork as a style reference and apply that look to footage or other frames, so the hand-drawn character carries across a shot.
- 2D-to-3D and Turntable: Turn a flat illustrated element into a 3D-style object and generate a turntable view, which helps when a heart becomes a product, a logo element, or a prop.
- Remove Background: Clean up an extracted element.
You keep your compositing pipeline and use Styleframe for the generative part where reference control matters.
It is not a replacement for Procreate. Procreate is where you draw the brush and the artwork. Styleframe is useful when you want that artwork to move or change style while keeping your direction.
Quick checklist
- Create a square canvas and draw a black heart with vertical symmetry.
- Center, scale, and copy the canvas.
- Create a new brush set and brush.
- Paste the heart into Shape Source and invert it, so the heart is white on black.
- Increase Spacing in Stroke Path for separate stamps.
- Turn off pencil pressure for opacity if you want consistent hearts.
- Set minimum and maximum sizes.
- Add Stamp Color Jitter for multicolor results.
- Test, refine, and export as transparent PNG, PSD, or an image sequence for After Effects.
With a clean source shape and a few deliberate settings, a custom heart brush takes minutes to build. It gives you a reusable asset that fits illustration, social content, and motion graphics alike.