How to Make a Grid on Procreate
StyleFrame Team8 min read
To make a grid in Procreate, open Actions (wrench icon) → Canvas, turn on Drawing Guide, tap Edit Drawing Guide, and select 2D Grid. From there you can drag the blue node to move the grid, drag the green node to rotate it, and adjust color, opacity, thickness, and grid size. Turn on Drawing Assist to have Procreate adjust your strokes to match the direction of the grid lines, then tap Done to commit.
The rest of this guide covers each setting, how to size a grid to match a video frame, how to build a custom grid brush, and how to carry grid-based layouts into a motion pipeline.
How to Turn On a 2D Grid in Procreate
The steps below are for Procreate on iPad. Procreate Pocket uses a slightly different menu path, covered afterward.
- Open your canvas and tap the Actions icon (the wrench).
- Go to the Canvas tab.
- Switch on Drawing Guide.
- Tap Edit Drawing Guide to open the Drawing Guides screen.
- Tap 2D Grid at the bottom of the screen if it isn't already selected.
The grid is a thin-line overlay on top of your layers. It isn't painted into any layer, so you can toggle it on and off without touching your artwork.
Procreate Pocket on iPhone
Pocket puts the same controls under different menus. Go to Modify → Actions → Guides, tap 2D Grid, then tap Guide Settings to open the Drawing Guides screen. Pocket also offers a Units option for choosing the measurement type of your grid, which is useful if you're laying out to a physical or pixel-based spec.
Adjusting Position and Rotation
On the Drawing Guides screen, two nodes control where the grid sits:
- Blue Positional node: drag it to move the entire grid across the canvas. Use this to align a grid intersection with the center of your composition or the edge of a safe area.
- Green Rotational node: drag it to rotate the grid lines. Rotating the grid is handy for angled compositions, diagonal camera moves, or tilted type.
If you drag too far, tap either node and choose Reset to return the grid to its default position.
Customizing the Grid's Appearance
The same screen has four settings that control how the grid looks:
- Color: use the hue bar at the top of the screen. Pick a color that contrasts with your artwork. A bright cyan or magenta reads well over dark frames, while white works on a black canvas.
- Opacity: goes from invisible to fully opaque. Keep it low for working and raise it temporarily when you need to check alignment.
- Thickness: controls how heavy the lines look. Thin lines are less distracting; thicker lines help on a small screen.
- Grid Size: sets the scale of the squares. This is the setting that matters most for production work, so it's worth planning ahead.
When you're done, tap Done to commit the changes. Tap Cancel to return to the canvas without applying them.
Using Drawing Assist to Align Strokes with the Grid
A visible grid only helps you eyeball alignment. Drawing Assist goes further: with it on, Procreate adjusts your strokes to match the direction of the guide lines. That means lines you draw freehand come out aligned to the grid instead of wobbling off axis.
Some practical uses:
- Drawing UI panels, lower thirds, and title cards where edges need to line up.
- Blocking out architecture or set pieces for a 3D scene.
- Sketching icons or glyphs that need consistent proportions.
- Building modular layouts for infographic or data-visualization animations.
Matching the Grid to a Video Frame
Most tutorials stop at "change the grid size," but for motion work you want the grid to divide your canvas cleanly. The trick is to choose a grid size that divides evenly into your canvas dimensions.
A few examples:
- 3840 × 2160 canvas, 120 px grid: 32 columns by 18 rows.
- 1920 × 1080 canvas, 120 px grid: 16 columns by 9 rows.
- 3000 × 3000 canvas, 750 px grid: a clean 4 × 4 layout.
Set the canvas size first when you create a new canvas, then pick a grid size that divides into it with no remainder. That way the grid edge lands exactly on the frame edge, and every cell is the same size.
If you build layouts in After Effects, matching cell sizes means a layout sketched on the iPad can be rebuilt in a comp with predictable positions. Treat any mapping to your comp's coordinate space as something to verify on your first project rather than assume.
How to Make a Grid Brush in Procreate
A drawing guide is a canvas overlay. If you want grid texture painted into your art, such as a dotted lettering guide, a blueprint-style texture, or a stamp of cell lines, build a grid brush. There are two common versions.
Dot Pattern Grid Brush
- Create a square canvas, for example 3000 × 3000 px, and set the background to black.
- Turn on the Drawing Guide, tap Edit Drawing Guide, set the guide color to white, and set the grid size to a quarter of the canvas (750 px for a 3000 px canvas).
- On a new layer, draw a small white circle with a monoline brush, centered on one grid intersection.
- Duplicate the circle until every intersection has one. Turn on Snapping in the Selection tool to place copies accurately.
- Export the artwork as a JPG and save it to your photos.
- In the brush library, duplicate the Grid brush from the Textures set.
- Open the duplicate, go to Grain → Edit → Import → Import a photo, and select your JPG. Tap Done.
- Turn off Offset Jitter so the pattern stays consistent, and adjust the scale to taste. A value around 20% works as a starting point.
Line Stamp Grid Brush
- Create the same square black canvas and turn on the Drawing Guide.
- On a new layer, draw four horizontal lines and as many vertical lines as you like.
- Export as a JPG and save it.
- Tap the plus sign in the brush library to create a new brush.
- Open it, go to Shape → Edit → Import → Import a photo, and choose your JPG.
- Under Stroke Path, set Spacing to 100%.
- In Properties, raise the maximum and minimum size and set opacity to 100%. Zero out the other dynamics so each stamp is predictable.
Each stamp lays down a block of grid lines wherever you tap, which is useful for quickly building tables, panels, or lettering frameworks.
Procreate Grid Tips for Motion and VFX Work
- Keep a dedicated layout canvas. Create a canvas at your delivery resolution so style frames and storyboard panels line up one-to-one with your timeline.
- Export without the guide. Because the grid is an overlay, your exported PNG or PSD carries only your artwork. If you want a grid reference in your comp, export a separate screenshot or draw the grid onto its own layer.
- Use layers for structure. Draw layout elements on separate layers and name them. A layered PSD export is easier to import into After Effects, where each layer can become its own animatable element.
- Lock your grid size per project. Changing grid size midway through a design makes it hard to keep spacing consistent. Note the values you used so you can reuse them.
Where Styleframe Fits After the Grid
A grid-based layout in Procreate usually ends up as a style frame, a storyboard panel, or a keyframe, which then has to be turned into moving footage. Styleframe is an AI video and motion tool that can take your Procreate frames as reference material. Treat it as a way to extend your hand-built layouts into motion, not as a replacement for the design decisions you already made on the grid.
Troubleshooting Common Grid Problems
- I can't see the grid. Check that Drawing Guide is toggled on under Actions → Canvas, and that grid opacity and thickness aren't set to invisible.
- My strokes aren't aligning to the grid. Open Edit Drawing Guide and make sure Drawing Assist is enabled. Without it, the grid is only a visual overlay.
- The grid doesn't line up with the canvas edge. Reset the grid with the node menu, then choose a grid size that divides evenly into your canvas width and height.
- The grid is distracting. Lower the opacity or thickness, or change the color so it contrasts less with your palette.
- The grid didn't appear in my export. That's expected. Guides are an overlay, not pixels. Draw the grid on a layer if you need it in the exported file.
Quick Recap
Open Actions → Canvas, turn on Drawing Guide, tap Edit Drawing Guide, and choose 2D Grid. Use the blue and green nodes to position and rotate it, adjust color, opacity, thickness, and size, and enable Drawing Assist to align strokes with the grid lines. For production use, pick a grid size that divides your canvas evenly, and build a custom grid brush when you want grid texture in the artwork itself. From there, your layouts can carry directly into your motion pipeline as keyframes, references, and layered files.