How to Make a Grain Brush in Procreate
StyleFrame Team8 min read
To make a grain brush in Procreate, tap the + in the Brush Library, then build the brush from two parts: a Shape (the stamp, such as scattered dots) and/or a Grain (a texture that shows through each stroke). Create the source art on a square canvas in pure black and white, copy it, paste it into the Shape or Grain editor, then tune Spacing, Scatter, Rotation, Scale, and Rendering Mode until strokes read as fine, even noise. Save it and test it on a blank layer at several sizes before you rely on it.
Shape grain vs. texture grain
Procreate gives you two ways to build a grain brush, and they behave differently.
- Shape-based grain (a "grain shader"): The stamp is a field of tiny dots. Each dab lays down a patch of speckle, and Scatter, Count, and Spacing decide how dense and random it looks. It works well for shading, stippling, and adding grit to specific areas.
- Texture-based grain: The Grain source is a texture that sits "behind" the stroke, like paper tooth. It suits brushes that should feel like charcoal, chalk, or risograph ink.
You can also combine them. A dotted Shape gives you controllable shading, and a subtle Grain adds consistent surface texture. Start with one method, then layer in the other.
Set up the source canvas correctly
A few setup rules prevent most of the problems artists run into with custom brushes:
- Use a square canvas. Non-square sources distort inside the brush editors.
- Work large. Something like 10 × 10 inches at 300 dpi keeps the stamp or texture from going soft when you scale the brush up.
- Use pure black and white for opaque results. Mid-gray or color in the source produces a semi-transparent brush. That's useful when you want it, but it's frustrating when you don't.
- Keep edges clear for shape stamps. Dots that run off the canvas edge will clip into hard, visible shapes in every dab.
Method 1: Build a stipple-based grain shader brush
This approach makes a brush that sprays fine speckle and responds well to size changes.
Draw the dot field
- Create a square canvas and set the background to pure black.
- Pick a stipple-style brush from your library (a light stipple brush works well) and set the color to pure white.
- Dot across the canvas until you have a fair amount of white specks, keeping them inside the edges.
- Erase clusters or overlaps so the spacing between dots looks even. A small monoline brush at a tiny size, tapped casually around the canvas, works too.
Turn it into a brush
- Copy the artwork: swipe down with three fingers and tap Copy All.
- In the Brush Library, choose a set and tap + to create a new brush.
- Open Shape, tap Edit beside Shape Source, tap Import, and choose Paste. Tap Done twice to save the selection.
Starting settings
These values are a solid baseline, not a rule. Adjust to taste:
Why these matter: higher Scatter breaks up any visible pattern, Follow Stroke rotation stops dots from lining up the same way in every dab, and Uniform Blending keeps overlapping dabs from stacking into harsh dark patches. Removing pressure-to-opacity gives you consistent grain density, so the texture doesn't vanish when you lighten your touch.
Method 2: Build a texture-driven grain brush
If you want a brush that reads like paper tooth, grit, or film-like noise, use the Grain panel instead.
- Tap + in the Brush Library to start a new brush.
- In Shape, choose a simple source (a basic round or square) or import a custom one.
- In Grain, choose a built-in texture, or import a photo or your own black-and-white texture.
- In Stroke Path, set Spacing. Tighter spacing yields a more solid stroke, while wider spacing gives a broken, scattered look.
- Use Scatter and Jitter for randomness. These add unpredictability to placement and angle.
- In the Grain settings, use Scale to change grain size. Experiment with the Movement option, which changes how the grain behaves as you draw.
- Adjust Depth and Contrast to control how visible the grain is and how sharply it separates from the surrounding paint.
- Test on a new layer, refine, then name the brush so you can find it later.
Generate a grain source with Procreate's Noise
You don't need to draw your own texture. Procreate's Adjustments → Noise produces procedural noise with three styles (Clouds, Billows, Ridges), plus Scale, Octaves, and Turbulence sliders. Single mode keeps it black-and-white, which suits a grain source. Fill a square layer with a neutral value, apply Noise in Single mode with Additive on or off depending on what you need, and tune Scale for the grain size you want. Then copy the result into the Grain editor.
Clouds gives coarse, soft variation. Ridges gives harder, more detailed structure. For fine film-like grain, keep Scale small and push Octaves up for complexity.
Make the grain seamless
Visible seams are a common complaint with custom grain brushes. If you see a repeating tile edge in long strokes, the source isn't tiling cleanly. The usual fix:
- On a square canvas, paint your grain pattern (a speckle brush in mid-gray works; very dark values may not register as grain).
- Duplicate the layer and use Move/Transform with Magnetics and Snapping enabled to shift copies exactly to the canvas edges, so content wraps across left/right and top/bottom.
- Flatten, then clean up any hard line where the copies meet by retouching the center cross.
- Import the result as the Grain source and test with a long, fast stroke.
If you can still spot the repeat at large scale, make the source bigger or add more irregular marks.
Tune the brush
- Too uniform: Increase Scatter or Jitter, or add a second, differently scaled grain.
- Too faint: Raise Depth/Contrast, or increase Count for shape-based brushes.
- Too heavy: Reduce Count, widen Spacing, or lower the brush Opacity.
- Blurry at large sizes: Your source is too small. Rebuild it at higher resolution.
- Pattern visible in strokes: Increase Scatter, switch to Follow Stroke rotation, or fix the seamless tile.
- Grain changes with brush size in ways you don't like: Check the Grain Scale and Movement settings and match them to how you paint.
Test every brush at small, medium, and huge sizes, and on both light and dark backgrounds. A brush that looks perfect at 50 px can fall apart at 800 px.
Use hand-made grain in a motion pipeline
For motion designers, a custom grain brush is a quick way to create textures that don't look like everyone else's stock overlays. Practical workflows:
- Texture plates: Paint grain, dust, stipple shading, or edge wear on separate layers and export them with transparency. Bring them into your compositing software as overlays and experiment with different blend modes.
- Matte and mask texture: Use painted grain as a luma matte or track matte to roughen edges, break up gradients, or drive a displacement.
- Animated boil: Paint several variations of the same grain and cut between them at a low frame rate to get a hand-drawn "boil." Even four to six distinct frames can read as organic.
- Seamless tiles: If you made a seamless grain, export it at high resolution and tile or scale it in your compositing or 3D software without visible repeats.
- Resolution: Paint at a size that survives your delivery resolution. If the final comp is 4K, a texture painted small and scaled up will soften.
Where Styleframe fits
Hand-painted grain is great for stills and plates, but extending that look across moving footage is where it gets time-consuming. Styleframe is an AI video and motion tool you can explore for carrying a hand-made look onto moving footage. Check its current documentation for supported inputs, features, and export formats.
A reasonable workflow is to design the grain and texture language in Procreate, use those frames as style references in an AI video tool such as Styleframe, bring the results into your compositing software, and finish with your usual grain management, color, and blend-mode control. The look starts from your own artwork.
Quick checklist
- Square canvas, large (about 10 × 10 in at 300 dpi)
- Pure black and white source for opaque results
- Paste into the Shape or Grain editor
- Set Spacing, Scatter, Rotation, and Rendering Mode
- Remove pressure-to-opacity for consistent density
- Make the source seamless if you're using Grain
- Test at multiple sizes and backgrounds
- Export transparent, high-resolution plates for compositing
Once you have one grain brush you like, duplicate it and vary Scale, Spacing, and Count. A small family of grain brushes, from fine dust to coarse grit, will cover most texture needs without leaving your own style behind.