How to Make a Glass Texture in Procreate
StyleFrame Team8 min read
To make a glass texture in Procreate, fill your shape with a pale tint, erase most of the color from the center with a soft eraser, then add edge shading on a Multiply layer and crisp highlights on an Add or Screen layer. For frosted, rippled, or stained looks, finish with Noise, Gaussian Blur, and Liquify adjustments on separate layers. Keep every element on its own layer so you can export a layered PSD or transparent PNG and reuse the texture in After Effects, Blender, or Cinema 4D.
What Makes Glass Read as Glass
Glass has no color of its own. What the eye reads is a combination of transparency, a bright rim where the thickness changes, hard specular highlights, soft refracted color, and distortion of whatever sits behind it. A flat gray-blue fill won't do it, but a handful of layers, each handling one of those cues, will.
Think of the texture as a stack of separate jobs: tint, edge density, highlights, surface grain, and distortion. Painting them separately matters even more if the asset is headed for motion work, because you'll want to animate or adjust them independently later.
Set Up the Canvas
- Use a mid-light background. Pure white hides white highlights. A light gray or a mid-tone gives you room to judge both the darks and the brights. Switch to a dark background periodically, since glass often ends up over dark footage.
- Work larger than you think you need. If the texture will be scaled in a comp, start at the largest canvas your device handles comfortably. Upscaling a soft gradient is forgiving, but upscaling crisp highlights is not.
- Plan for a square or tileable area if needed. Panel textures, frosted overlays, and ripple maps are often used as full-frame layers, so match your intended comp aspect ratio.
- Turn on Drawing Assist for symmetrical objects. For jars, bottles, and glasses, Symmetry set to vertical saves time and keeps both sides consistent.
Step 1: Draw the Shape and Fill It With a Tint
- Create a new layer and outline the object with a monoline or studio pen in a light blue, aqua, or neutral gray.
- Hold the pencil at the end of a stroke to snap a line straight when you need clean rims or tabletop edges.
- Drag the color swatch into the shape to fill it (ColorDrop). Hold and slide to adjust the fill threshold so no thin gaps remain around the edges.
- Duplicate the filled layer. Hide the original and keep it as a selection source for later.
That hidden layer is your insurance. Tapping it and choosing Select gives you a precise mask for every later pass, so shading never spills outside the glass.
Step 2: Hollow Out the Center
Glass is densest where you look through the most material, which is usually near the edges. Take the duplicate layer, choose the Eraser with a soft brush at full opacity, and remove most of the color from the middle. Leave a band of tint around the perimeter.
Use the side of the Apple Pencil for a broader, softer stroke, and keep the transition gradual. A hard cutoff reads as a sticker, while a gradual falloff reads as thickness.
For an alternative, lower the layer opacity to somewhere around 30–40% and erase from there. This gives you a lighter, more delicate glass, such as a thin tumbler or a window pane.
Step 3: Add Edge Shading on a Multiply Layer
- Create a new layer above the tinted one and set its blend mode to Multiply.
- Select your hidden original layer, with Add and Freehand modes, so painting is restricted to inside the shape. Alternatively, clip the layer to the tint layer.
- Use a flat brush or soft airbrush at reduced opacity, in the same hue as the fill but slightly darker.
- Build up shading along the contours slowly. Layer another Multiply pass with a deeper shade only where the glass curves away from the viewer.
Keep the strokes light and gradual. Heavy, dark edges turn glass into plastic or ceramic. You want a clean rim that thickens toward the corners and bottom, where light has to travel through more material.
Step 4: Paint Highlights and Reflections
Highlights do most of the work in selling the material.
- Add a new layer set to Add (Linear Dodge) or Screen. Use white or a very pale tint.
- Paint one or two long, narrow highlights that follow the form. On a cylindrical jar, that means vertical streaks near one edge and a thinner echo on the opposite side.
- Add a small, sharp specular dot or window shape where the light source would hit most directly. Use a hard brush here. Contrast in edge sharpness between soft shading and crisp highlights is what makes the surface feel hard and polished.
- Create another layer in Overlay or Soft Light for subtle reflections. Paint faint shapes that follow the curvature, such as bent window bars or a color cast from a nearby object, and lower the opacity until they barely register.
A good rule is to stop one pass earlier than feels natural. Reflections overwhelm glass quickly.
Step 5: Build Surface Texture
This is where "glass texture" in the sense of a material, rather than an illustrated object, comes together. Pick the variant that matches your need.
Frosted Glass
- Fill a layer with a light neutral tone.
- Open the Adjustments menu and apply Noise at a moderate level, then apply Gaussian Blur at a low value to soften the grain.
- Add a second noise pass on a separate layer set to Overlay for micro-variation.
- Lower the opacity of the stack until it feels milky rather than gray.
For blur behind the frost in a comp, don't paint it in Procreate. Export the frost grain and handle the background blur in After Effects, where it responds to what's actually behind the layer.
Rippled or Hammered Glass
- Create a layer with large, irregular soft shapes in mid-gray, using a round soft brush.
- Use Liquify (Push or Twirl) at low pressure to pull the shapes into wavy, organic forms.
- Apply a light Gaussian Blur and boost contrast with Curves to create defined bands.
- Use this layer as a displacement or normal-style reference in your 3D or compositing tool. In Procreate alone, set it to Soft Light over your tint for the visible effect.
Stained Glass
- Draw dark lead lines on one layer using a monoline brush, keeping the cell sizes varied.
- Fill each cell on a color layer underneath, using saturated, slightly uneven colors.
- Add a texture layer with Noise and Liquify swirls, set to Overlay or Soft Light and clipped to the colors.
- Use an Add layer to simulate light glowing through the thin areas, then a soft Multiply layer for darker cell corners.
Using alpha lock or clipping masks keeps each pass from bleeding into the lead lines.
Step 6: Color Refinement
Use Adjustments > Curves or Color Balance on the group, not on individual layers, so the whole stack stays consistent. Push slight cyan into the shadows and a warmer tone into the highlights for a subtle split that reads as refraction. Chromatic Aberration, applied sparingly to a duplicated flattened copy, can mimic edge dispersion, but keep it subtle if you'll add the same effect in post.
Export for a Motion Pipeline
How you export determines how useful the texture is later.
- Layered PSD for After Effects, so you can separate tint, shading, and highlights and animate them independently.
- Transparent PNG for a single flattened glass element. Hide the background color layer before exporting, or the transparency is lost.
- Separate exports for grain and distortion maps. A gray ripple map exported alone can drive a displacement map.
- Hide your reference layers and check the file on both light and dark backgrounds before delivery.
Use the Texture in After Effects
Once the texture is in a comp, a few standard moves bring it to life:
- Put the tint and shading layers above your footage and set the highlights layer to Add or Screen.
- Use your ripple map as a Displacement Map source on a duplicate of the background to fake refraction, and animate the map position for slow movement.
- Pair a frosted overlay with a Gaussian Blur on an adjustment layer clipped beneath it. Track-matte the adjustment layer to the glass shape.
- Animate highlight layers with slight position shifts to simulate light sweeping across the surface.
The same exported maps can be plugged into Blender or Cinema 4D materials as roughness, bump, or color inputs.
Common Mistakes to Avoid
- Making it too opaque. If you can't imagine seeing through it, remove tint from the center.
- Using only soft brushes. Glass needs a few razor-sharp edges to feel solid.
- Overusing white. Reserve pure white for the brightest specular points.
- Flattening too early. Merge layers only for a final delivery copy.
- Ignoring the background. Always test the texture over the footage or plate it will sit on.
Treat glass as a stack of simple, separate layers, and you'll get a convincing result in Procreate while keeping everything flexible for animation and compositing.