How to Make a Flyer on Procreate
StyleFrame Team8 min read
To make a flyer in Procreate, create a canvas at your final print size and 300 DPI (for example 2550 × 3300 px for US Letter), then block in the layout with layers, add imagery and type, and export a PDF or PNG. Build the background, image, and text on separate layers so you can revise any of them without redoing the rest. Check your safe margins and bleed before export.
For motion designers and editors, a Procreate flyer is often the start of a larger piece: a social promo, an event teaser, or a title card. This guide covers the build first, then how to carry the artwork into a video pipeline.
Plan the flyer before you open Procreate
Decide four things first, because they set your canvas and are hard to change later:
- Final trim size. Common sizes are US Letter (8.5 × 11 in), half-letter or 5 × 7 in, A4, and A5. For a poster-style flyer, 11 × 17 in works well.
- Output. Print, social, or both. Print needs more pixels and bleed, while screen needs only the pixel dimensions of the platform.
- Bleed and safe area. Printers specify their own bleed requirement past the trim, so confirm it before you build the canvas (0.125 in / 3 mm is used as the example below). Keep text and logos at least 0.25 in inside the trim.
- Hierarchy. One headline, one supporting image, one call to action (date, place, URL or QR code). Everything else is secondary.
Collect your assets up front: logo files, photos, brand colors, and any fonts you've installed on the iPad. Fonts are easy to forget, and swapping them mid-build shifts every text box.
Step 1: Set up the canvas
Tap + in the Gallery and create a custom canvas. Enter the trim size plus bleed, and set DPI to 300 for anything that will be handed out at arm's length. For US Letter with 0.125 in bleed on all sides, that's 8.75 × 11.25 in, or 2625 × 3375 px.
Canvas size is a hard constraint on iPad. Procreate limits the number of layers according to the pixel dimensions and your device's memory, so a very large canvas gives you fewer layers. Community advice from artists doing large posters on an iPad Air is consistent on a few points:
- Pixel dimensions matter more than the DPI number. One user who tested it reports that a canvas of roughly 2000 × 3000 px was crisp enough to print a 24 × 36 in poster that's viewed from a distance.
- If your device can't create the full-size canvas, build at the largest proportional size it can handle and scale up on export.
- On complex files, merge finished layers as you go.
A flyer at Letter or A4 size is much smaller than these poster examples, so you may not need these workarounds for it.
Also check the color profile in the canvas settings. If a printer asks for CMYK, confirm the profile with them before you start, and expect the saturated blues and neons to shift. Test early rather than discovering it at export.
Step 2: Set up guides and layout structure
Turn on Actions > Canvas > Drawing Guide and enable Edit Drawing Guide to adjust grid size and opacity. Use a 2D grid to mark the trim line, the safe margin, and the center axis.
Then create a layer group for each part of the flyer:
- Background (color, texture, gradient)
- Imagery (photos, illustrations, cut-outs)
- Graphics (shapes, dividers, badges)
- Type
- Effects (glows, grain, overlays)
Naming layers is a habit worth keeping from After Effects. A flyer you need to revise next week is only easy to edit if you can find the headline layer in two taps.
Step 3: Build the background and imagery
Backgrounds
For flat color, pick a swatch and drag it onto the canvas to fill a layer (ColorDrop). For a gradient, paint two colors in with a soft airbrush on a layer, or use Adjustments > Gradient Map on a grayscale base for more controlled color. Keep the background simple behind the text, since busy backgrounds are the most common reason a flyer is hard to read.
Photos and cut-outs
Import a photo with Actions > Add > Insert a photo. To isolate a subject, use the Selection tool in Automatic mode and adjust the threshold, then convert the selection to a layer mask rather than deleting pixels. Masks let you reverse a rough cut later, and they work non-destructively like mattes in a compositing app.
Match the image to the palette with Adjustments > Hue, Saturation, Brightness or Color Balance. If your photo and graphics look like they came from different places, a shared color grade fixes most of it.
Illustration and shape work
For hand-drawn elements, work on their own layers with a studio pen or monoline brush. For geometric shapes, use QuickShape by drawing a line or circle and holding at the end of the stroke, then use Edit Shape to refine it.
Step 4: Add and style the type
Use Actions > Add > Add Text. Procreate's text tools let you set the font and size, along with other styling controls, and you can import your own fonts.
A few practical rules for flyers:
- Limit yourself to two typefaces: one for the headline, one for details.
- Make the headline large enough to read from a few feet away, and the date and location clearly second in the hierarchy.
- Keep body text at 9 pt or larger at print size, which is easy to misjudge on a zoomed iPad screen.
- Check contrast against your background by temporarily desaturating the whole file. If the text still reads in grayscale, it works.
Don't flatten type until the copy is approved. Once you convert a text layer to raster (or merge it), spelling errors need repainting. Duplicate the group and keep an editable version.
If you add a QR code, generate it elsewhere, import it as an image, and leave a clear quiet zone around it. Test the scan from a printed or on-screen sample before sending to print.
Step 5: Add finishing effects
Effects sell the flyer, but should support the hierarchy, not compete with it.
- Depth blur: Duplicate a graphic layer, apply Adjustments > Gaussian Blur (Layer mode), lower its opacity, and place it behind the sharp version to get a soft glow or shadow.
- Light: On a new layer, paint with a soft airbrush in a light color and set the blend mode to Add or Screen. Reduce opacity until it reads as light rather than paint.
- Texture and grain: Add a noise or grain layer on top using Overlay or Soft Light, and keep it subtle. Heavy grain can look muddy in print.
- Color shifts: For a stylized, poster-like look, use Chromatic Aberration or Motion Blur under Adjustments, applied to an effects layer or a copy of the imagery, not to text.
Apply these to duplicated layers wherever you can, so you always have a clean version available.
Step 6: Review and export
Before exporting, run through this checklist:
- Zoom to 100% and check edges of masks and cut-outs.
- Confirm all important content sits inside the safe area.
- Proofread names, dates, times, addresses, and URLs.
- Hide guides so you can judge the composition.
Then use Actions > Share:
- PDF for print shops. Choose the best quality option.
- PNG for lossless images and anything with transparency.
- JPEG for quick sharing, social posts, and email.
- PSD if you plan to continue in Photoshop or a motion pipeline. Check that your layers and blend modes come through as expected.
- Procreate file to archive the editable original.
Export a print version and a separate screen version (for example, 1080 × 1350 px for a social post) rather than resizing a single file. Cropping from the print canvas to fit a screen format often reveals margins that no longer work.
Where Procreate falls short for flyer work
Procreate is a strong illustration tool, but it isn't a layout application. Know the limit before you commit:
- Layer caps tied to canvas size.
For a single-page flyer with strong illustration, this limit rarely matters. For multi-page documents or strict brand templates, build the layout in a page-layout tool and use Procreate for the artwork.
Taking the flyer into motion
Many flyers end up as video: an animated announcement, a looping social post, or a title sequence. A layered PSD export is a good starting point. In After Effects, import it as a composition with layers preserved, then animate type, masks, and light layers in your usual way.
This is also where an AI video and motion tool can help, if you want more than keyframing flat layers. Reference-driven tools can use your flyer artwork as the starting reference rather than a loose prompt. You still finish, grade, and composite in the tools you already use.
Quick reference
Start with a clear hierarchy, work non-destructively with masks and duplicated layers, and keep an editable master. Those habits make the flyer easy to revise, and make it easy to reuse in motion later.