How to Make a Fishnet Brush in Procreate
StyleFrame Team8 min read
To make a fishnet brush in Procreate, draw a seamless diamond-lattice tile on a square canvas, then import it into a new brush as the Grain source in Brush Studio. Set the grain behavior and scale so the net fills whatever area you paint. For a net that follows your stroke instead, use the tile as the Shape source and tune spacing and rotation.
Choose the Right Type of Fishnet Brush
Two builds look similar but behave very differently. Pick one before you draw anything.
- Grain (texture) brush: The fishnet fills any area you paint, like a stencil revealing a repeating pattern. It's ideal for stockings, mesh fabric, netting, or a texture overlay. It doesn't follow stroke direction, and it's a poor fit when the net has to hit a specific length or width.
- Shape (stamp) brush: The fishnet tile is stamped along your stroke path. This can follow the direction you draw, which suits nets that wrap around a limb or run along a curve. It takes more tuning to avoid visible seams between stamps.
Most people want the grain version, so that's the main walkthrough below.
Step 1: Build a Seamless Fishnet Tile
The brush is only as good as the tile. If the pattern doesn't repeat cleanly, you'll see seams in every stroke.
- Create a square canvas, such as 2048 × 2048 px. Square dimensions make tiling predictable.
- Turn on the Drawing Guide (Actions > Canvas > Drawing Guide > Edit Drawing Guide). Use the 2D Grid and set a grid size that divides evenly into your canvas.
- Draw the diagonal lines of your net in black on a white background. Every diagonal that leaves one edge should re-enter the opposite edge at the same height. That alignment is what makes the tile seamless.
- Keep line thickness consistent. Thin lines read as delicate tulle, and thick lines read as heavy industrial mesh.
- Flatten the artwork or hide the background layer so you have clean black-on-white shapes.
To test the tile, offset it. Duplicate the layer, move it by exactly half the canvas width and height, and check the center for breaks. Fix any mismatch before moving on.
If you'd rather not draw it, use your own photo or scan of a net, or a pattern with a license that permits commercial use. Pattern brushes sold or shared online often carry personal-use-only terms, and a brush built from someone else's artwork inherits those limits.
Step 2: Create the Brush in Brush Studio
- Open the Brush Library, tap + to make a new brush, and Brush Studio opens.
- Go to Grain and tap Edit under Grain Source.
- Choose Import and pull in your tile (from Photos, Files, or a copied image). Procreate uses the luminance of the image, so the black lines become the part of the net that paints.
- If the net is inverted (the holes paint instead of the threads), use the Invert option in the grain editor.
- Tap Done.
Before you continue, duplicate an existing basic brush and edit the duplicate rather than modifying an original. That way your starting point stays intact.
Step 3: Tune the Grain Behavior
This is where the net starts to feel usable.
Texturized vs. moving
- Texturized locks the pattern to the canvas, so overlapping strokes reveal the same net underneath. This is the right choice when you want one continuous mesh across a large painted area.
- Moving ties the grain to the brush, so each stamp carries its own texture and the pattern responds to brush size. Use this if you want the net scale to change as you resize the brush.
A common question is how to keep the net from looking identical at every brush size. With texturized grain, the scale is a fixed setting, so you adjust it manually. With moving grain, the Zoom and Scale controls determine how much the pattern crops or scales as the brush changes. Test both on a scratch canvas, because the behavior is easier to see than to describe.
Settings worth adjusting
- Scale: Controls the mesh size. Lower values give a tighter net.
- Depth and contrast: Raise these if the net looks faint or muddy. Lines should be crisp at your working size.
- Brightness: Nudge this up if the grain is eating too much of your color.
- Blend mode: Leave on Normal at first. Multiply works well when you want the net to darken whatever is beneath.
Step 4: Set Up the Stroke Properties
A fishnet brush behaves more like a reveal tool than a drawing tool, so adjust the stroke to match.
- Shape source: Use a plain, solid square or circle with hard edges so the grain is the only texture in play.
- Spacing: Keep it low so strokes fill in solidly.
- Streamline and stabilization: A little helps for clean edges around curved shapes.
- Apple Pencil settings: Set pressure to affect opacity gently rather than size, so the net stays at full density wherever you press.
- Rendering: Try a glazed mode if you see overlapping dark patches where strokes cross.
Rename the brush, set a preview image under About This Brush, and drag it into its own set so you can export it later.
Variation: A Fishnet That Follows Your Stroke
For a directional net, build the tile into the Shape source instead:
- In Shape, edit the source and import a small, tileable section of the net.
- In Stroke Path, increase spacing until stamps butt up against each other without overlapping. Overlap creates doubled lines.
- Under Shape Behavior, set the rotation to follow the stroke direction (the azimuth/rotation controls) and remove scatter and jitter.
- Test on a curved stroke. If you see seams, adjust spacing in small increments.
Expect imperfections at tight curves, since a stamp can't truly deform around a bend. For tight wraps, paint the net flat and use the Liquify or Warp tools afterward.
Make It Work as an Eraser
If you want fishnet-shaped cutouts (for scales or perforated fabric), you don't need a separate brush. Each tool in Procreate keeps its own brush selection, so tap the Eraser and choose your fishnet brush from the library. It then erases in the net pattern.
Troubleshooting Common Problems
- Visible tile seams: The tile edges don't align. Re-run the offset test and fix the mismatch.
- Net looks blurry: The tile resolution is too low for the scale you're using. Rebuild at a higher resolution or reduce the grain scale.
- Net is too faint: Raise contrast and depth, and check that the line color is truly black.
- Pattern is inverted: Use the invert option in the grain editor.
- Brush pattern shifts between strokes: You're likely on moving grain; switch to texturized for a fixed canvas-aligned net.
Taking the Fishnet Into a Motion Pipeline
A Procreate brush is a still-image tool, but fishnet textures are common in motion work: stockings in character animation, mesh overlays on title cards, net-pattern mattes for transitions, or hand-drawn textures for stylized backgrounds.
A few practical habits keep the handoff clean:
- Paint on separate layers. Keep the net on its own layer with a transparent background so you can matte and recolor it later.
- Export at working resolution or above. Export PNG for transparency or PSD to preserve layers, and work at least at your comp's resolution.
- Make the tile reusable. The same seamless tile can be a tiled texture in After Effects, a Cinema 4D or Blender texture map, or an alpha for a displacement or bump channel.
- Animate it in compositing. In After Effects, a painted net layer can drive Displace effects, work as a track matte, or be offset with expressions. Procreate's Animation Assist handles frame-by-frame, but heavier motion is better in your comp.
Where Styleframe Fits
Once your fishnet art exists, the harder question is often how to carry its look across moving footage or a sequence of frames. That's where may be useful. It's an AI video and motion tool.
It doesn't replace Procreate or your compositor. It extends a hand-made texture into motion while you stay in control of the look.
Licensing and Reuse
If the brush may appear in client or commercial work, build the tile from your own drawing or from material you have rights to. Treat downloaded brush sets, free or paid, as separate licenses: check whether they allow commercial use, and whether they permit you to redistribute a brush derived from them. Keep a note of the source of every tile in your project files.
Quick Recap
- Choose grain for area fills or shape for stroke-following nets.
- Draw a seamless tile on a square canvas and verify it with an offset test.
- Import it as the Grain source in Brush Studio on a duplicated brush.
- Tune texturized vs. moving grain, scale, depth, and contrast.
- Adjust stroke properties so the net stays dense and consistent.
- Export on separate transparent layers for use in your compositing pipeline.
Build the tile carefully and the rest is fast. A clean seamless pattern gives you a brush that works at any size and survives the trip into After Effects, Blender, or Nuke.