How to Make a File from Procreate Ready to Print
StyleFrame Team7 min read
To make a Procreate file ready to print, set the canvas to the final print size at 300 PPI, add 0.125 in of bleed on every side, and pick the color profile your printer specifies. Then duplicate the file, flatten the copy, and export it as a PDF or a high-quality TIFF or PNG through Share → Save to Files. Check the export at 100% zoom and order a proof before committing to a full run.
The rest of this guide covers each step, plus what to do if the artwork is already finished at the wrong size.
Start With the Print Specs, Not the Screen
Most print problems come from the canvas settings, not the export. Procreate lets you start on a screen-sized canvas, and that looks fine on an iPad. It can fall apart on paper.
Get these details from your printer or print-on-demand service before you draw:
- Final trim size (for example, 8×10 in or 11×14 in)
- Bleed requirement (0.125 in per side is the common standard)
- Accepted formats (PDF, TIFF, PNG, or JPEG)
- Color space (RGB, CMYK, or a specific ICC profile)
If the printer publishes a template, match it. A printer's own specs always override general advice, including this article's.
Canvas Size and Resolution
In the Gallery, tap +, then the custom canvas icon. Switch the unit from pixels to inches and enter your dimensions.
Size the canvas to the trim plus bleed
Bleed lets the artwork run to the edge after trimming, with no white sliver. Add it to the canvas size:
Keep critical elements such as text, faces, and logos about 0.25 in inside the trim line. Procreate has no dedicated bleed tool, so build the extra margin into the canvas and use the Drawing Guide if you want a visual boundary.
If you're prepping for a gallery-wrapped canvas, plan for much more extra image around the edges, since the artwork folds over the stretcher bars. Check the printer's requirement.
Set 300 PPI
Set the resolution to 300 at the physical print size. Lower values like 72 or 132 produce soft edges and visible pixelation in print. At 300 PPI, an 8×10 in print needs 2400×3000 px.
If you're unsure of the final size, go larger. Reducing a large canvas is safe, but enlarging a small one introduces blur.
Choose the Right Color Profile
Advice here conflicts, and the conflict is real. Printing from RGB works fine in many cases, and some printers convert for you. Others require CMYK. Here is how to decide.
When to stay in RGB
- Your printer or service accepts RGB and handles the conversion.
- The work is mainly for screens, and print is a secondary use.
- You're making high-end giclée prints. A wider RGB space such as Display P3 preserves more color, but confirm what your printer expects.
When to use CMYK
- Your printer explicitly asks for CMYK files.
- You want the on-screen preview to be closer to what ink can reproduce.
Procreate offers CMYK profiles, including GRACoL 2006, when you create a canvas. Working in CMYK from the start dulls the most saturated colors, but you see the limits as you paint instead of discovering them after conversion. You can also change the profile on an existing canvas, though colors will shift.
Why saturated colors shift
RGB is light, and CMYK is ink on paper. Neon greens, electric blues, and vivid oranges are the usual casualties. If you're coming from After Effects or video work, where wide-gamut color is normal, expect this to be a downgrade, not a bug.
Your display also lies a little. Full brightness makes artwork look lighter than it will print, so work at reduced brightness and rely on a proof for final color judgment.
Prepare the Layers
Printers generally want a flat file, but you shouldn't flatten your working document.
- Duplicate the canvas in the Gallery.
- Hide anything that shouldn't print, such as guide layers, reference images, and sketch layers.
- Check blend modes and adjustments. Verify that effects like Gaussian blur or Bloom look right at full resolution.
- Confirm the background. Printers usually want an opaque background unless they've asked otherwise.
- Flatten the duplicate only if you need a single-layer file.
Keep the layered original untouched so you can revise later.
Export: Format and Steps
Which format to pick
- PDF: The usual choice for professional printing. Multiple artworks exported together become separate pages of one PDF.
- TIFF: Large but high quality, often preferred for giclée work.
- PNG: Lossless and fine for most artwork, especially simple or flat-color pieces.
- JPEG: Use only at maximum quality, and only if nothing better is accepted. Repeated saves degrade it.
Export steps
- In the Gallery, swipe left on the canvas and tap Share. Or, from inside the artwork, open Actions → Share.
- Select your format and wait for the export to finish.
- Tap Save to Files and choose a destination.
PDF, native Procreate files, and very high-resolution images may not offer "Save Image" to Photos. They have to go through Save to Files, which is the more reliable route in any case, especially if you're sending to cloud storage.
Name the file clearly
Something like Artwork_8x10_300ppi_CMYK.pdf makes it obvious which version you sent. It also saves you from guessing a month later which file went to which printer.
Check Before You Send
Open the export, not the Procreate canvas, and inspect it:
- Zoom to 100%. Look for soft edges, banding, stray marks, and pixelation.
- Check dimensions. Confirm the pixel size matches your bleed-inclusive canvas at 300 PPI.
- Look at the edges. Make sure backgrounds extend fully into the bleed area.
- Test the text. Small type that looked sharp on an iPad can look rough at print scale.
Then order a proof. A digital or physical proof is the only reliable way to catch color shifts, trim problems, and resolution issues. It matters most for limited editions, client work, and anything with saturated color.
Finishing in Photoshop, Affinity, or After Effects
Procreate can produce a print-ready file alone, but a second app is useful in some cases:
- Color conversion: If the printer needs a specific ICC profile, convert and soft-proof in Photoshop or a similar editor.
- Bleed extension: If you forgot bleed, extend the edges in an image editor, though this works only on backgrounds that tolerate it.
- Compositing: If the piece mixes Procreate artwork with 3D renders or photography, assemble it in your compositing tool at full print resolution. In After Effects, set the composition to the bleed-inclusive pixel dimensions and render a lossless still.
- Format conversion: Use an image editor to create a TIFF or PDF/X if Procreate's output doesn't meet the printer's spec.
What If the Artwork Is Already Too Small?
This happens often with key art, title frames, and stills that began life as video-resolution assets. A 1920×1080 canvas prints at roughly 6.4×3.6 in at 300 PPI, which is far smaller than most poster formats.
Your options, from safest to riskiest:
- Redraw or rebuild at larger size if the artwork is vector-like or simple.
- Resample in Procreate, accepting some softness.
- Use a dedicated upscaler and review the result carefully at 100%.
- Print smaller, or reduce the target size to match the pixels you have.
AI upscaling can add plausible detail, but it can also invent textures and smooth linework. For illustration, compare it against the original before you approve it.
Where Styleframe Fits for Motion Artists
Styleframe isn't a print-prep tool, and you don't need it to finish a Procreate print file. It matters when the same Procreate artwork also has to move.
Some motion designers hand-draw boards, character art, or textures in Procreate and then bring them into a video workflow.
One practical note: 4K is 3840×2160 pixels, about 12.8×7.2 in at 300 PPI. That's useful for a frame grab or a small print, but a large poster needs more pixels, so check the math against your target size first.
Quick Checklist
- Canvas at trim size plus 0.125 in bleed, in inches
- 300 PPI at final size
- Color profile matched to the printer's requirement
- Layered original saved; duplicate prepared for export
- Opaque background where required
- PDF, TIFF, or max-quality PNG exported via Save to Files
- Inspected at 100% zoom
- Proof ordered before the full run
Follow that sequence and a Procreate file will arrive at the printer with the right size, resolution, and color. What's left is mostly the printer's own settings.