How to Make a Fan Brush in Procreate
StyleFrame Team9 min read
To make a fan brush in Procreate, duplicate a brush in Brush Studio, replace its Shape source with a stamp of fanned bristle lines, then raise Stroke Path spacing so each tap leaves a separate dab. Tune Shape rotation, Apple Pencil pressure, and an optional Grain so the bristles break up naturally, then save the brush in your own set. The finished brush works for pine trees, foliage, grass, and painterly texture plates you can bring into a motion pipeline.
What a fan brush actually does
A real fan brush has bristles spread in a thin arc. Painters dab it to stack feathery, uneven marks, which is why it's used for evergreens, grass, clouds, and foliage. A digital version needs to reproduce three behaviors:
- A stamp with gaps. The shape should read as separate bristle lines in an arc, not a solid wedge.
- Dab-friendly spacing. One tap should leave one clear fan imprint, and a drag should produce a repeating, slightly irregular pattern.
- Pressure and angle response. Heavier pressure should widen and darken the mark, and tilt or rotation should change the fan's orientation.
Many Procreate users in community threads report needing a custom fan brush for pine trees, which is why they download shared .brush files or build their own. Building your own lets you match the bristle count and spread to your project.
Step 1: Create a new brush
Open the Brush Library by tapping the paintbrush icon. You have two starting points:
- Duplicate an existing brush. Swipe left on any brush and tap Duplicate. A textured dry-media brush is a sensible base because it already has some grain and pressure behavior.
- Start from scratch in your own set. Scroll to the top of the library, tap the plus to create a new brush set, name it, then tap the plus inside that set to open a blank brush.
Keep custom brushes in their own set. Procreate's stock sets are easy to clutter, and a dedicated set makes exporting and backing up simple.
Tap your new brush to open Brush Studio. The tabs on the left (Stroke Path, Stabilization, Taper, Shape, Grain, Rendering, Wet Mix, Color Dynamics, Dynamics, Apple Pencil, Properties, About) are where all the work happens.
Step 2: Build the fan-shaped stamp
The Shape tab determines what each dab looks like. Think of it as a rubber stamp: white areas leave no paint, black areas leave paint.
Draw the stamp
- Create a new square canvas. A high resolution gives finer bristle detail, so go as large as Procreate allows for the canvas.
- Fill the background with white.
- In black, draw 15 to 30 thin lines radiating from a single point at the bottom center, spread across an arc of roughly 90 to 140 degrees. Vary the line length and thickness slightly; perfectly even bristles look like a comb.
- Add a few shorter strays between the main lines and leave small gaps. The irregularity is what makes dabs look hand-painted.
- Optionally apply a very light Gaussian blur or soft edge to the lines so the stamp doesn't look vector-sharp.
Select the whole canvas, then copy it.
Import it into Brush Studio
In your brush's Shape tab, tap Edit under Shape Source. Choose Import, then Paste (or import from Photos or Files if you saved the artwork). The stamp appears in the shape editor. If the result looks inverted, with the bristles as gaps, use the invert option and check the preview.
Tap Done and test a stroke in the preview pad at the bottom of the screen.
Step 3: Set stroke path and spacing
Open Stroke Path. Spacing controls the distance between stamps along a drag.
- Spacing: For tree dabbing, push it high enough that individual fans remain visible when you drag. For a more continuous feathered stroke, lower it. Expect to adjust this by testing, because the right value depends on your size setting.
- Jitter: Keep it low. A little adds organic variation, but too much destroys the arc shape.
- Streamline and Stabilization: Set these low or off. Fan brushes work through quick dabbing, and smoothing can make marks feel laggy.
- Fall off: Leave at zero unless you want strokes to fade out as you drag.
Community brush shares often mention tweaking spacing and rotation as the main fixes when a downloaded fan brush behaves oddly. The same two settings are the first to check on yours.
Step 4: Control rotation and scatter
Back in the Shape tab, look at the behavior sliders:
- Scatter: Keep it near zero. Scatter moves the stamp off the stroke line, which turns a tidy fan into a messy cloud.
- Rotation: This controls how the stamp follows the direction of your stroke. For dabbing, a fixed orientation (fan opening upward) is useful for trees. For grass and strokes that sweep sideways, let the shape follow the stroke.
- Randomized: A small amount gives each dab a slightly different angle, which helps when you build up evergreen branches.
- Azimuth: If you use Apple Pencil, enabling azimuth lets the stamp rotate with the pencil's tilt direction, which is closest to how a physical fan brush behaves in the hand.
- Count and Count Jitter: Leave Count at 1. Raising it stamps multiple copies and usually makes the shape too busy.
A practical approach is to make two versions of the brush: one with fixed rotation for upright foliage, one that follows the stroke for grass and sweeping marks.
Step 5: Add grain and wet mix
Grain applies a texture across the shape, and it keeps digital dabs from looking too clean.
- In the Grain tab, pick a subtle paper, canvas, or noise texture from the source library.
- Choose texturized behavior if you want the grain to stay fixed to the canvas, or moving if you want it to travel with the stamp. Fixed grain suits a canvas feel, while moving grain looks more like bristle texture.
- Keep depth low so the stamp's bristle structure stays readable.
For wet-on-wet blending, which many oil-painting-style landscapes depend on, open Wet Mix. Dilution, charge, attack, and pull control how the brush picks up and mixes with existing color on the canvas. Start with modest values, then raise pull gradually until the dabs smear into the layer beneath just enough to look layered rather than pasted.
Step 6: Tie it to Apple Pencil pressure
In the Apple Pencil tab, set pressure to affect size and opacity so a light touch leaves a faint, narrow fan and a firm one a wide, strong mark. In the Properties tab, set the maximum and minimum sizes. A fan brush that scales down too far loses its arc, so set the minimum size to a value where the bristle lines still read. Rename the brush in the About tab and add your name or a note on what the brush is for.
Step 7: Test and refine
Make a test canvas and run through these checks:
- Dab once and confirm you can see individual bristle lines.
- Dab upward in a stack to build a pine tree, rotating the canvas rather than the brush if you need different angles.
- Drag sideways to see how spacing behaves in a stroke.
- Paint over a dark underlayer to check how light and dark values interact.
- Zoom to 100 percent and look for tiling or visible repetition.
If dabs look uniformly mechanical, increase randomized rotation slightly or redraw the stamp with more uneven bristle lengths. If they look blobby, reduce size, increase spacing, or lighten wet mix.
To share or back up the brush, swipe left on it in the library and choose Share. This produces a .brush file you can send to collaborators or move to another device.
Using fan-brush work in a motion pipeline
A Procreate brush is a handy way to produce hand-made texture plates, matte-painting elements, and stylized frames. Here is how that work usually moves into a professional pipeline.
Export for compositing. Export your painted layers as PNGs with transparency, or as a layered PSD, then bring them into After Effects, Nuke, Blender, or Cinema 4D. Painted foliage cards, grass strips, or cloud dabs can be layered with parallax or used as texture maps. Painting at a high canvas resolution gives you room to scale in comp.
Use paintings as style references. This is where a tool like Styleframe can fit. A few frames painted with your fan brush can serve as visual references for reference-driven style tools, so live-action or CG footage can pick up your painted look. Because the style comes from your own artwork, you keep authorship over the aesthetic.
Animate between painted keyframes. If you've painted a start and an end frame of a landscape, keyframe-based video tools can generate motion between them. You stay in charge of the compositions, and the tool handles the in-betweens.
Clean up and finish. Background removal, upscaling, and similar tools can help prepare painted elements for compositing, though you'll want to check the results against your shot requirements.
Keep your compositing workflow. Check which export formats your tool supports, such as image sequences, so output can drop into existing After Effects or Nuke comps without changing how you grade, track, or composite.
Troubleshooting common fan brush problems
- The stamp looks like a solid wedge. The lines in your shape are too thick or too close together. Redraw with thinner lines and clearer gaps.
- Dabs overlap into a blob. Increase spacing or lower the brush size.
- Marks look pixelated at large sizes. Your source shape is too low resolution. Redraw it on a larger canvas.
- The fan points the wrong way. Adjust Rotation, or rotate the stamp 180 degrees in your source artwork.
- Colors muddy together too fast. Reduce Wet Mix pull and dilution.
- The brush feels laggy. Turn down streamline and stabilization, and lower the maximum brush size if your canvas is very large.
Quick recap
- Duplicate a brush or create a new one in your own set.
- Draw a stamp of fanned, uneven bristle lines in black on white and import it as the Shape source.
- Raise spacing in Stroke Path so each dab stays distinct.
- Set scatter low, and tune rotation, randomization, and azimuth.
- Add subtle grain and, if wanted, wet mix.
- Map Apple Pencil pressure to size and opacity.
- Test, refine, and export the brush file for backup.
Once the brush behaves, the same method extends to other bristle shapes: flat brushes, filberts, rakes, and splatter. Each is a different stamp and a few adjusted sliders, and you can export the results as plates for your After Effects or Nuke work or feed them in as style references for the rest of your pipeline.