How to Make a Crystal Ball in Procreate
StyleFrame Team7 min read
To make a crystal ball in Procreate, draw a perfect circle, clip a flipped copy of your background photo inside it, and use Liquify's Expand mode to bulge the image so it refracts like a lens. Then add edge darkening, a rim light, specular highlights, and a contact shadow to sell the glass. Build each of these on its own layer so you can export the pieces and animate them later in After Effects.
What You Need Before You Start
- A background photo with depth. A flat surface in the foreground and a distinct horizon or landmarks behind work best, because the ball needs something to refract. Your canvas size should match the photo's dimensions.
- Procreate on iPad with Apple Pencil. A finger works, but the Pencil makes the highlight work easier.
- A basic brush set. The Monoline brush (Calligraphy) for the shape, a soft airbrush for glows, and a hard round brush for highlights are enough.
If this will end up in a motion project, import a photo at the resolution you'll deliver, such as 3840×2160. Plan your layer stack before you start painting.
Step 1: Build a Perfect Circle
- Create a new layer and name it "Ball."
- Draw a rough circle with Monoline. Hold the pen down at the end of the stroke so QuickShape snaps it to a true circle.
- Fill it by dragging a color into the shape. The color doesn't matter, since this layer is only a mask.
- Turn on Snapping in the Transform tool and nudge the circle until the guides confirm it's centered, horizontally and vertically.
Centering matters more than it seems. The refraction effect is radial, so an off-center circle makes the distortion look lopsided.
Step 2: Fake the Refraction
Real glass spheres flip and compress what's behind them. You can imitate that in four moves.
- Duplicate your background photo layer and drag the copy above the circle.
- Clip it to the circle with Clipping Mask. The photo now appears only inside the sphere.
- Flip it vertically with Transform. A real glass ball inverts the scene, and that inversion is the cue viewers read as "lens."
- Scale the copy down with Uniform scaling until the width of the scene roughly matches the circle's diameter, then re-center it using Snapping.
Now bulge it. Open Adjustments > Liquify, choose the Expand mode, and set a large brush size. Press once at the center of the ball and hold until the middle of the image swells. Stop when the horizon curves convincingly. Overdoing it turns the scene into mush, and a subtle bulge usually looks more believable.
Keep the Distortion Editable
Liquify is destructive. Before applying it, duplicate the clipped layer and hide the copy. If a client wants a different background or a stronger bulge, you can redo it without rebuilding the sphere.
Step 3: Paint the Glass
Refraction alone looks like a photo in a circle. The glass reads as glass through several lighting layers. Put each on its own layer and clip it to the ball so nothing spills.
Edge darkening
Create a layer above the refracted image, set it to Multiply, and paint a dark blue-gray soft ring around the outer edge with a large airbrush. Glass thickens toward its silhouette, so the edges absorb more light than the center.
Rim light
On a new layer set to Screen or Add, paint a thin, bright, slightly cool arc along one inner edge, opposite your main light. This mimics light bouncing around inside the sphere and gives the ball its volume.
Specular highlights
Pick a hard round brush and use white on a Normal layer. Add a window-shaped or softbox-shaped highlight near the top left, where the main light sits, and a smaller, dimmer one near the bottom to suggest a secondary bounce. Keep the shapes crisp. Soft highlights make the surface look like plastic or frosted glass.
Inner glow and tint
For a classic fortune-teller look, add a Color Dodge or Add layer and airbrush a soft violet or teal glow in the lower third. Lower the layer opacity until the refracted background still shows through. Tinting the whole refracted layer with a Hue/Saturation adjustment also helps the ball sit apart from the scene.
Step 4: Add Contents and Atmosphere
A crystal ball is usually about what's inside it. You have a few options:
- Swirling fog: Use a smoky or cloud brush on a Screen layer, then smudge it with the Smudge tool in long curved strokes.
- Particles and stars: Scatter small dots with a speckle brush at different sizes and opacities. Place a few in front of the glow and a few behind it to suggest depth.
- A hidden scene: Paint or paste a small image, such as a cityscape or a face, between the refracted background and the highlights. Use a lower opacity and a slight blur so it reads as sitting inside the glass.
Keep the contents beneath your highlight layers. Highlights should always sit above everything, because they represent the glass surface itself.
Step 5: Ground the Ball in the Scene
Floating objects fall apart without grounding, so spend time on these three details.
- Contact shadow. On a Multiply layer beneath the ball, paint a tight, dark ellipse where the sphere meets the surface. Add a wider, softer shadow offset away from the light.
- Caustic glow. Glass focuses light. If the ball sits on a surface, add a small bright, warm patch near the shadow on the side opposite the light source. This is a hallmark of glass spheres in photographs.
- Base or stand. If you want the classic look, paint a brass or wooden stand on its own layer. Clip a texture to it, add a rim highlight, and let the ball's shadow overlap the stand's top edge.
If the ball is floating rather than resting, keep the shadow soft and detached, and add a subtle reflection of the ball on the surface below.
Common Mistakes
- Skipping the flip. Without inversion, the sphere looks like a window, not a lens.
- Perfectly even edge darkening. Make it a little thicker on the shadow side to match your light direction.
- Highlights too soft. Hard-edged highlights are the fastest way to signal glass.
- No color relationship with the scene. Pull the glow and tint colors from the environment so the ball feels lit by it.
- Merging layers too early. Keep your stack intact until the delivery file is final.
Taking the Crystal Ball into Motion
If this is for a motion project, treat Procreate as a layer-based concept painter, not a finishing tool.
- Export your layers. Check how your blend modes look once the file is in After Effects. Name your layers clearly: Ball Mask, Refraction, Edge Multiply, Rim, Highlights, Glow, Shadow, Base.
- Rebuild blend modes in After Effects. Set each layer's mode to match, and use the Ball Mask as a track matte if you want to replace the refracted content.
- Animate the contents separately. Drift the fog layer, twinkle the particles, and pulse the glow with expressions or keyframes. Slightly scale or shift the refracted background over time to simulate camera movement through the lens.
- Add a displacement or lens pass. If you need convincing motion refraction, replace the painted bulge with a displacement map or a spherical lens effect driven by a gradient. A real 3D sphere in Cinema 4D or Blender with a glass shader will also hold up under camera moves, where a painted illusion won't.
A painted crystal ball works well for stills, title cards, and styleframes. If the camera needs to orbit it, move to 3D.
Where Styleframe Fits
Styleframe can be useful once your painted ball needs to move, or when you want to explore variations without redrawing everything. Your layered Procreate file remains the source of truth, and Styleframe can handle motion and variation around it.
Quick Checklist
- Circle drawn with QuickShape and centered with Snapping
- Background copy clipped, flipped, scaled, and bulged with Liquify Expand
- Unliquified backup layer kept hidden
- Edge darkening, rim light, and hard-edged highlights on separate layers
- Contents placed below the highlights
- Contact shadow and caustic glow added
- Layers exported with clear layer names
Follow these steps and you'll have a convincing crystal ball that is also organized for animation, whether you finish it in After Effects, move it to 3D, or extend it with Styleframe.