How to Make a Cross Stitch Pattern on Procreate
StyleFrame Team6 min read
To make a cross stitch pattern in Procreate, create a 300 DPI canvas sized to your fabric, build a square grid, set the grid layer as a Reference layer, and fill each cell on a separate layer using a limited thread palette. Then add a 10-stitch guideline, a color legend, and export a PDF or PNG to print at 100% scale.
Plan the Pattern Before You Open Procreate
Two decisions shape the file: your fabric count and your finished size.
Fabric count is stitches per inch. A 14-count Aida gives you 14 stitches per inch, so a 5 x 5 inch piece needs a 70 x 70 stitch grid. Divide stitch dimensions by count to get finished size, or multiply finished size by count to get the grid you need to draw.
Common counts run from 10 to 22. Lower counts give chunkier stitches and are easier to read on a printed chart. Higher counts allow more detail but are harder on the eyes.
Write down three numbers: stitches wide, stitches tall, and fabric count. Everything else in the canvas setup follows from them.
Step 1: Create the Canvas
In the Procreate Gallery, tap + and choose Custom Canvas.
- DPI: set it to 300 if you plan to print the chart.
- Units: use inches, centimeters, or millimeters rather than pixels so you can judge the printed size.
- Dimensions: use a standard paper size if you print at home. A4 is 210 x 297 mm and Letter is 8.5 x 11 inches, both at 300 DPI.
If the chart is large, a single page may not fit it at a readable scale. In that case, work on one big canvas and split it into printable pages at export time.
Step 2: Build the Grid
A cross stitch chart is a square grid, and you have three practical options in Procreate.
Grid brushes. Several Procreate creators publish brush sets that stamp a 10 x 10 block of squares. Installing one is simple: download the .brushset file, tap it in the Files app, and Procreate imports it. Stamp the brush repeatedly to cover your canvas.
Grid templates. Some creators share ready-made Procreate files at fixed sizes, such as 100 x 100, 200 x 200, and 300 x 300 stitches, usually with heavier lines every 10 stitches. You can recolor the grid by changing the fill on its color layer.
Drawing Guide. Procreate also has a built-in Drawing Guide that can display a grid. It can work for sketching, but for a fill-by-cell workflow, use a grid drawn on its own layer.
Whichever you choose, keep the cell size an even, whole number of pixels where you can. Irregular sizes produce soft, uneven edges later.
Step 3: Set the Grid as a Reference Layer and Fill Squares
This step is what makes Procreate quick for charting.
- Put the grid on its own layer.
- Tap the layer and choose Reference.
- Add a new layer above it for your stitches.
- Choose the Selection tool, set it to Automatic, and tap inside a grid cell. Because the grid is a Reference layer, the selection follows the cell boundaries even though you're working on a different layer.
- Fill the selection with your current color by dragging the color swatch into it.
Fix the Most Common Problem
If color floods the whole layer instead of one square, the selection threshold is too high. After tapping inside a cell, keep your Pencil or finger pressed and slide left. A bar at the top shows the threshold percentage. Lower it until the selection stays inside the cell. Somewhere between 30% and 70% usually works, but you may need to undo and retry a couple of times for your grid.
If your fills look jagged or leave gaps when you zoom in, the grid itself is probably soft. A pixelated grid makes the automatic selection unreliable. Use a crisp grid, work at high canvas resolution, and avoid scaling the grid layer after you've drawn it.
Step 4: Build a Thread Palette
A pattern is only useful if you can buy the thread for it. Limit yourself to the colors you can actually stitch.
- Create a custom palette in Procreate's Color panel.
- Name each swatch with the thread brand and code, for example "DMC 310."
- Keep the palette small. Dozens of near-identical colors make a chart tiring to follow.
Put each color on its own layer if your design is complex. That lets you hide everything but one color to check coverage, and it makes later edits easier.
Step 5: Add Pattern Details
A usable chart needs more than filled squares.
- Heavier lines every 10 stitches. They make counting far easier. Many grid templates include them already.
- Center marks. Add arrows or small marks at the middle of each edge so you can align the design with the center of your fabric.
- Symbols. If you want a black-and-white chart, add a unique symbol per color on a separate layer.
- Backstitch and details. Draw outlines or fine details with a monoline brush on a layer above the squares, and keep these distinct from full stitches.
- A legend. List each symbol or swatch, the thread code, and how many skeins or strands you need.
Step 6: Export and Print
Export from Procreate as a PDF for multi-page charts, or as a PNG or JPEG for single images.
Print at 100% scale. If your printer driver shrinks the page to fit, the chart no longer matches your fabric count, and the grid is no longer true to size.
Do a test print before committing to a big project. Check that grid lines are legible, symbols are distinguishable, and the 10-stitch lines read clearly.
Alternative: Start from Pixel Art
If you prefer drawing to charting, you can work in a pixel-per-stitch style.
Create a small canvas where each pixel represents one stitch, for example 80 x 100 pixels. Draw with a hard-edged brush, then enlarge the canvas using a resize method that keeps the edges sharp instead of blurring them. Overlay a grid on the enlarged version and finish the chart.
Pixel art found online is a common starting point, but make sure you have the right to use it, especially if you plan to sell or share the resulting pattern.
Converting an Existing Pattern
Digitizing a pattern from paper is harder than starting from scratch. A photo or scan of a printed chart is rarely perfectly square, so the grid won't align cleanly. Straighten the image first, then resize and position your own grid to match it. Expect to nudge things by hand, because even a small mismatch accumulates across a large pattern.
Using Stitch Patterns in Motion Work
Cross stitch charts are also handy reference material for motion and VFX work. A stitched look, with its hard pixel grid, limited palette, and textile texture, is a recognizable style for titles, transitions, and brand animation. A chart you build in Procreate gives you a clean source asset, and you can bring it into After Effects, Cinema 4D, or Blender as a texture or displacement map.
Quick Checklist
- Know your fabric count and stitch dimensions.
- Create a 300 DPI canvas sized for your paper.
- Build a crisp square grid on its own layer.
- Set the grid as a Reference layer, and fill cells with Automatic selection.
- Lower the selection threshold if color leaks.
- Name palette swatches with thread codes.
- Add 10-stitch lines, center marks, symbols, and a legend.
- Export a PDF and print at 100%.
Once you've built one chart, the same template and palette setup speeds up every pattern after it.