How to Make a Clean Trace in Procreate
StyleFrame Team8 min read
A clean trace in Procreate comes from inking on a new layer above a locked, faded reference image, using a stabilized brush and one confident stroke per line. Procreate has no auto-trace, so smoothness depends on StreamLine settings, stroke discipline, and cleanup with an eraser that matches your inking brush. Export on a transparent background, or as a layered PSD, and the line art drops straight into After Effects or any other compositing tool.
Why Procreate Traces Look Messy
Most wobbly traces come from three problems: too many short, overlapping strokes, a brush with no stabilization, and a canvas too small to draw smoothly at the zoom level you need. Fix those and the rest is cleanup.
Procreate also has no vector engine and no Image Trace function. Everything you draw is raster. That's fine for illustration and frame-by-frame work, but if you need infinitely scalable paths for After Effects shape layers, plan an extra vectorizing step (covered below).
Set Up the Canvas Before You Trace
Start with a canvas larger than your delivery size. If the final comp is 1920×1080 or 3840×2160, a canvas at or above that resolution gives you room to zoom in, draw confidently, and scale down later without softening the line.
Match the aspect ratio to your composition now. Re-cropping traced line art later is easy, but re-tracing because the framing was wrong is not.
Import and Prepare the Reference
- Open Actions (wrench) > Add > Insert a Photo, or import the file from the Gallery.
- Use the Transform tool to position and scale the image. Turn on Uniform so you don't distort it.
- Open the Layers panel, tap the N on the reference layer, and drop opacity to roughly 40–60%. You want to see your ink clearly against it.
- Swipe the reference layer to the right and tap Lock so you can't nudge it by accident.
If your reference is busy, you can also desaturate it (Adjustments > Hue, Saturation, Brightness) or raise its contrast so key edges stand out. Procreate's Reference companion window (Canvas > Reference) is a good option when you'd rather keep the reference off the canvas entirely.
Build a Brush That Draws Clean Lines
The brush matters more than anything else. Pick something with consistent, predictable behavior, such as the Technical Pen, Studio Pen, or Monoline, then tune it in Brush Studio:
- StreamLine: Raise it until your lines glide through small hand jitters. Too high and the line lags behind your pencil.
- Stabilization: Helpful for long, deliberate curves. It averages your stroke over a longer distance, which smooths more but responds more slowly.
- Motion Filtering: Use it sparingly; it can make tight corners feel rubbery.
- Pressure curve: For consistent weight, flatten the Apple Pencil pressure response, or reduce size dynamics on a monoline brush. Variable-width lines look hand-drawn, while uniform lines look technical. Decide which one your project needs before you start.
Duplicate the brush before editing it so the original stays intact. Keep the same brush for inking and erasing (see cleanup below).
Trace in Layers, Not on One Canvas
Create a new layer above the reference and rename it. Then split your line work by function:
- A layer for the main silhouette or outline
- A layer for interior detail
- A layer for secondary elements such as hair, texture, or background
For animators and compositors, this pays off later. Separate layers export as separate elements in a PSD, so you can animate, re-time, or restyle each one independently in After Effects.
Draw With Technique
Good technique keeps the line clean without relying on cleanup.
- Zoom in. Pinch in until the stretch you're drawing fits comfortably under your hand. Lines drawn at the right scale are smoother than lines drawn small and scaled up.
- Draw from the shoulder, not the wrist. Long curves drawn in one pass look cleaner than the same curve built from short segments.
- Use one stroke per line. Resist re-drawing a line over itself. If a stroke is off, undo (two-finger tap) and redraw it. Overlapping strokes create thick, lumpy lines.
- Overshoot and trim. Let strokes pass slightly beyond where they should end, then erase back to clean endpoints. It's faster and sharper than trying to land exactly on a corner.
- Use QuickShape for straight lines and circles. Draw the shape and hold at the end until Procreate snaps it, then use Edit Shape to adjust. Draw a line and keep your finger or pencil down to lock it straight.
- Use Drawing Assist. Turn on Drawing Guide with Assisted Drawing for symmetry or perspective lines on layers where it makes sense.
- Simplify. A good trace isn't a copy of every pixel. Decide which edges carry the form and leave the rest out. Fewer, more intentional lines read as cleaner than a complete but cluttered tracing.
Clean Up the Line Art
Once the trace is down, hide the reference and look at the lines on their own. That's when problems show.
Fix Ends and Joins
Zoom in on every intersection. Gaps in closed shapes, overshoot at corners, and small dots at stroke starts all show up here. Use the Eraser with the same brush you inked with. Using a different eraser brush often leaves a different edge texture, which is visible on tapered or textured lines.
Smooth Wobbles
For a lumpy curve, redraw it rather than trying to fix it. If you must correct a small bump, select the segment, then use Liquify (Adjustments > Liquify) with a small brush in Push or Smooth mode and low pressure to nudge it into shape. Heavy Liquify use can distort line weight, so use it only for small fixes.
Close Shapes for Color
If you plan to fill with color, check that every shape is fully closed. Use ColorDrop or Selection on a separate layer beneath the line art. A single gap will cause the fill to leak. Zoom in and close it, or use a fill threshold adjustment so the fill respects edges more precisely.
Unify Line Weight
If lines vary unintentionally in thickness, select the layer and use Gaussian Blur plus Curves to thicken or tighten the line. This is a blunt tool and softens detail, so apply it only on layers where it helps. For most work, redrawing a few problem strokes is cleaner than processing the whole layer.
Export for Motion Work
How you export determines how well the art survives in your compositing pipeline.
- Transparent PNG: Hide the background color layer and the reference, then Share > PNG. Procreate preserves transparency when the background layer is off.
- Layered PSD: Share > PSD keeps each layer as its own element. Open it in After Effects as a composition with retained layer sizes, or import as footage and work with the layers individually.
- Match color space. Check your document's color profile in Canvas settings against your project profile so blacks and midtones don't shift on import.
- Frame-by-frame work: If you're tracing over live-action or 3D renders for rotoscope-style animation, trace each frame on its own layer. Procreate's Animation Assist can export an image sequence or an animated file, but keep your own file naming consistent so the sequence imports in order.
If You Need Vector Paths
Procreate can't output vector shapes. If you need paths for After Effects shape layers or for scaling beyond the canvas, export a high-resolution, high-contrast PNG of your line art and run it through Illustrator's Image Trace, or another vectorizer. Expect to clean up nodes afterward. Smoother, single-stroke lines vectorize far better than lumpy or doubled lines, so the technique above makes this step easier.
Where Styleframe Fits After the Trace
A clean trace is often the start of a pipeline, not the end. Once you have solid line art, Styleframe can carry it into motion without taking creative decisions away from you. It's an AI video and motion tool built for artistic control, and every generation is driven by your own reference images, video clips, and keyframes.
Here's how that works in practice:
- Ink-and-Paint and Restyle: Use your traced line art or a painted frame as a style reference, then apply that look to footage or other frames through reference-driven style transfer. Your traced linework defines the look rather than a generic preset.
- Frames-to-Video: Set your start and end keyframes, such as two traced poses, and let Styleframe generate the motion between them. You choose the keyframes, so you control the poses.
- 2D-to-3D and Turntable: Turn a traced character or object design into a 3D view, or rotate it for a turnaround reference, which helps when you're building a consistent model sheet.
- Remove Background and 4K Upscale: Isolate a traced element cleanly, and bring outputs up to production-ready 4K.
Iteration is non-destructive, so you can try different references or keyframes without losing earlier versions. Output comes out as image sequences, so it slots into After Effects or Nuke the same way any other footage would, and an After Effects plugin is on the way. Your compositing workflow stays where it is. The Procreate trace supplies the design intent, and Styleframe extends it into motion you can still direct.
Quick Checklist for a Clean Trace
- Create a canvas at or above delivery resolution.
- Insert the reference, fade it to about 50%, and lock it.
- Build or tune a brush with StreamLine and stable pressure.
- Ink on separate, named layers, one stroke per line.
- Zoom in, overshoot, and trim ends with a matching eraser.
- Close shapes, fix wobbles by redrawing, and avoid heavy Liquify.
- Hide the reference and export as a transparent PNG or layered PSD.
- Vectorize externally only if you need paths.
The cleanest traces don't come from a single setting. They come from stabilized brushes, deliberate strokes, and a willingness to redraw one line rather than patch five. Get those habits down and your line art will hold up whether it ends up in a layered After Effects comp, a vector pass, or a style-driven motion pipeline.