How to Make a Circle Brush in Procreate
StyleFrame Team8 min read
To make a circle brush in Procreate, create a white circle on a black square canvas, copy it, then open the Brush Library, tap +, and paste it as the Shape Source in Brush Studio. Raise the stroke spacing so each tap or drag lays down clean, separate circles, and turn off scatter, rotation, and jitter. If you only need a circle occasionally, QuickShape (draw a circle, hold, tap Edit Shape, choose Circle) or a single tap with a hard round brush will also do it.
Which method fits your job
Procreate has no dedicated shape tool, so you have three practical options. They suit different situations:
- QuickShape is best for a single, precise circle or ellipse that you'll fill or outline once.
- A hard round brush tap is the fastest way to a solid dot, which you can scale afterward with the Transform tool.
- A custom circle brush is best when you'll stamp circles repeatedly, such as halftone dots, bokeh, particles, or ring marks, and want consistent behavior every time.
The rest of this guide focuses on the custom brush, since that's what the keyword asks for, then covers the faster alternatives.
Step 1: Draw the circle source image
A Procreate brush shape is just a grayscale image. White areas lay down paint and black areas stay empty. That means your source needs to be a clean white circle on black.
- Create a new square canvas. Use a large size so edges stay crisp when the brush is scaled up.
- Fill the background layer with black.
- On a new layer, pick white and draw a rough circle. Hold your Pencil or finger at the end of the stroke until QuickShape snaps it into a perfect form.
- Tap Edit Shape in the notification bar and choose Circle. Drag the edge between the nodes to scale it uniformly.
- Fill the circle with white. Dragging the color swatch into the shape (ColorDrop) is quickest.
- Leave a margin of empty black around the circle. If the circle touches the canvas edge, the stamp can look clipped.
For a ring brush instead of a solid disc, use a thick white outline with a black center. For a soft circle, add a Gaussian Blur to the white layer before copying.
When you're done, tap the Actions menu (wrench), choose Add > Copy Canvas, or flatten and copy the layers so the black-and-white image is on your clipboard.
Step 2: Build the brush in Brush Studio
- Open the Brush Library and tap the + icon to create a new brush. Brush Studio opens.
- Go to the Shape tab and tap Edit under Shape Source.
- Choose Import and select Paste, or pick the image from Photos or Files. The circle appears in the shape editor.
- Tap Done.
If the result looks inverted, with a hole where the circle should be, your source has black and white swapped. Go back and invert the image.
Step 3: Tune the settings so it behaves like a circle brush
A freshly imported shape inherits the settings of the default brush, so you'll want to adjust these tabs:
Stroke Path
- Spacing: Increase it until the stamps no longer overlap if you want separate dots along a stroke. Lower it for a continuous, thick line made of overlapping circles. Test with a quick scribble and adjust.
- Jitter and fall-off: Set both to zero for predictable, uniform circles.
- Streamline: Add a little if you'll drag the brush and want smooth paths. Set it to zero for exact placement.
Taper
- Set both pressure and touch taper to none. Tapering shrinks the stamp at the ends of a stroke, which distorts the circle.
Shape
- Scatter: Zero, so circles land exactly where you tap.
- Rotation and Azimuth: Off or zero. A perfect circle doesn't need rotation, but rotation settings can affect textured or off-center sources.
- Randomized and Count Jitter: Off, unless you want a scattered bokeh or confetti effect.
Apple Pencil and Dynamics
- Decide whether pressure should change size, opacity, or both. For consistent geometric circles, reduce or remove pressure response. For an expressive, hand-made feel, leave size pressure on.
Properties
- Set the Maximum Size high enough for your use. You can always scale up a layer with Transform, but you lose sharpness if you push too far.
- Set the Minimum Size sensibly so the brush doesn't shrink to nothing.
- Rename the brush and create a preview by drawing in the stamp area.
Tap Done, then test on a blank layer. If circles come out oval, check that your source image is truly square and that no tilt-based shape behavior is turned on.
Step 4: Make variations
Once one circle brush works, duplicate it rather than starting from scratch. Swipe left on the brush and tap Duplicate. Then:
- Ring brush: Replace the shape source with an outline circle.
- Halftone or dot brush: Raise spacing and keep size constant so strokes lay out an even row of dots.
- Ink or grunge circle: Keep the same shape, then add a grain texture in the Grain tab and enable texture movement settings that suit a printed or hand-inked look.
- Bokeh or particle brush: Turn on scatter, count, and size jitter, and lower opacity so overlapping circles build up soft light.
- Tracing guide: Stamp a perfect circle on one layer, lower its opacity, and hand-draw over it on a new layer with any expressive brush. This gives organic linework with accurate proportions.
Faster ways to get a circle
QuickShape
Draw a rough circle and keep your Pencil on the canvas at the end of the stroke. The line snaps to a shape. Tap Edit Shape and select Circle to force a true circle. If QuickShape doesn't trigger, open Actions > Prefs > Gesture controls, go to the QuickShape tab, and make sure hold-to-snap is enabled.
The single-tap method
Choose a hard round brush, such as a hard airbrush, set the size, and tap once. The stamp is a solid circle. Place it on its own layer and resize it with Transform. This is a quick way to create punch-out shapes or mattes, and it's simple enough that many artists never build a custom brush.
Imported shape brush packs
Free shape brush sets include circles, squares, polygons, and stars. Import the brush file via Files, and it appears in your library. These are handy, but building your own gives you control over edge quality, spacing, and behavior, and you know exactly how it was made.
Getting a clean circle larger than the brush limit
Brushes have a maximum size. If you need a larger circle than the slider allows, stamp it at the maximum size on its own layer, then use Transform in Uniform mode to enlarge it. Start from a high-resolution canvas to avoid soft edges. For pixel-sharp results at any scale, build circles as vector shapes in another tool and bring them in, and use the Procreate brush for textured, hand-made circles.
Troubleshooting common problems
- Circle looks like a flat or cropped disc: The source image has no margin, or the canvas isn't square.
- Jagged edges: The source resolution is too low. Rebuild it at a higher resolution.
- Overlapping stamps create a messy line: Spacing is too low for your intent.
- Opacity builds up unevenly: Check Rendering settings and use a flow or opacity setting that fits how you want stamps to combine.
- Circles are tinted or have a gray cast: The source isn't pure white. Use white (#FFFFFF) on pure black.
Using Procreate circles in a motion pipeline
If you work in After Effects, Premiere Pro, Nuke, Cinema 4D, or Blender, a custom circle brush is a handy way to create hand-made assets: ink dots for transitions, grungy rings for HUD elements, textured mattes, and bokeh overlays.
A few habits help:
- Draw elements on transparent backgrounds and export as PNG. Turn off the background color layer before exporting.
- Work at the final delivery resolution or higher so scaling in compositing doesn't soften the edges.
- Keep each element on its own layer so you can export, retime, and composite them independently.
- Use grayscale versions as mattes or luma inputs for track mattes and displacement.
Where Styleframe fits
Hand-drawn circles also work well as reference material for AI-assisted motion work. is an AI video and motion tool that works from your own reference images, video clips, and keyframes, so you can bring circle sketches or textured ring frames from Procreate into it.
Quick recap
- Draw a white circle on a black square canvas, using QuickShape and Edit Shape for accuracy.
- Copy it and import it as the Shape Source in a new brush in Brush Studio.
- Set spacing, taper, scatter, and pressure so stamps behave consistently.
- Duplicate the brush to create rings, halftone dots, textured circles, and bokeh.
- For one-off circles, use QuickShape or a single tap with a hard round brush and scale with Transform.
With one reliable circle brush saved in your library, you can build graphic elements in seconds and bring them straight into your compositing pipeline.