How to Make a Cheetah Print Brush in Procreate
StyleFrame Team8 min read
To make a cheetah print brush in Procreate, draw a square tile of solid black spots on white, rework it so the edges tile seamlessly, then import it as the Grain of a duplicated brush. Set the grain behavior to Texturized so the pattern stays fixed to the canvas instead of dragging with your stroke, and tune the Scale slider until the spot size reads correctly. Once the brush works, you can paint it into clipping masks, export it as a tileable texture, or bring it into After Effects, Cinema 4D, or Blender.
What You Need Before You Start
- Procreate on iPad, with a version that lets you import a custom grain into a brush.
- An Apple Pencil, or a finger if you're patient with small marks.
- A reference photo of a cheetah coat. Cheetah markings are the key detail: solid, round-to-oval spots scattered fairly evenly. Leopards and jaguars have rosettes (rings with a hollow center), so if you draw rings you've made the wrong animal.
- An existing brush to duplicate. Any simple brush will do, because you'll replace most of its settings.
Step 1: Create a Square Canvas
Create a custom canvas of 3000 × 3000 px. A square tile repeats predictably, and 3000 px gives you enough detail that the spots stay crisp when you scale the brush up for large fills. If you plan to use the pattern as a texture on 3D assets or in 4K compositions, don't go much smaller.
Keep the background white and work on a layer above it. Grain textures are read as grayscale, so pure black on pure white gives the cleanest result.
Step 2: Draw the Spots
Use any hard-edged brush, such as a monoline or a basic inking brush, and set the color to pure black. A dark gray will make the final brush look washed out and semi-transparent.
Some guidelines for believable cheetah marks:
- Vary size and shape. Mix small dots with slightly larger oval ones. Avoid perfect circles.
- Keep the distribution even but not gridded. Cheetah spots are loosely spaced, with no heavy clumps and no obvious rows.
- Leave breathing room. Gaps between spots should be about the width of a spot or a little larger.
- Stay off the edges. Don't let any mark touch the border of the canvas in this first pass. You'll deal with the edges in the next step.
Fill roughly the center of the canvas, leaving a margin all the way around.
Step 3: Make the Tile Seamless
You build the wraparound by hand with snapping.
- Set your spot layer's blend mode to Multiply so the white doesn't cover anything beneath it. Hide or keep the white background layer below.
- Duplicate the spot layer three times, for four copies total.
- Open the Transform tool and turn on Snapping in the settings at the bottom of the screen.
- Move each copy by half the canvas width and half the canvas height, so the center of each copy lands on a different corner of the canvas: top left, top right, bottom left, bottom right. Snapping makes this precise.
- You now have the original spot cluster split across the four corners, which means the canvas edges already match when the tile repeats. The middle of the canvas is empty.
- On a new layer, fill the empty middle with more spots. Again, keep every new mark away from the canvas edges.
- Flatten the layers onto white, or merge the spot layers and keep the white background underneath.
Because each corner contains a quarter of a spot cluster that continues on the opposite edge, the tile wraps cleanly. You can confirm that later with a test import or in After Effects.
Step 4: Export the Tile
Flatten the image to black on white and save it as a JPEG or PNG to your Photos or Files app. Keep a copy of the layered file as well. If you need to adjust spot density later, you'll want the editable version.
Step 5: Build the Brush in Brush Studio
- Open the Brush Library and duplicate a simple brush. Never edit your only copy of a brush you like.
- Tap the duplicate to open Brush Studio.
- Go to Grain and tap Edit. Choose Import, then pick your exported image from Photos or Files.
- Confirm the grain preview shows your spots, and use Invert in the grain editor if the pattern appears reversed (hollow spots with a solid field).
- Set Grain behavior to Texturized. This locks the pattern to the canvas, so strokes reveal the same underlying spots in the same place every time. With Moving, the pattern slides along with each stroke, which is useful for scribbly textures but wrong for a pattern.
- Raise Depth to its maximum so the grain shows at full contrast.
- Use the Scale slider to size the spots. Lower values make small, tight spots, and higher values enlarge them. You will adjust this repeatedly while testing.
Settings that make it behave like a fill
For a pattern brush, you want predictable coverage rather than a natural stroke:
- Under Stroke Path, keep spacing low so the stroke is continuous.
- Under Apple Pencil, remove or reduce pressure sensitivity on size and opacity, so a light stroke doesn't thin out the pattern.
- Under Properties, raise the minimum size so a quick tap doesn't shrink the brush to a speck.
- Use a large, hard-edged shape so the brush deposits enough area for the grain to show.
Rename the brush, such as "Cheetah Spots," so it doesn't get lost in your library.
Step 6: Test and Refine
Create a new canvas and paint a few broad strokes in dark brown. Check for:
- Visible seams or repeating lines. If you see a grid, a mark touched the edge of your tile or the corner snapping was off. Revisit the layered file and fix those areas.
- Spots that are too uniform. If a pattern looks obviously tiled, add more size variation to your source tile.
- Fuzzy edges. Tiny grain scales can soften spots. Increase the tile resolution or reduce the Scale amount.
- Pattern showing as flat gray. The grain may be at low depth, or the source was not pure black and white.
Step 7: Add the Base Color
Grain brushes paint in a single color, so a full cheetah coat is a two-step process:
- Fill a layer with a warm tan or golden base.
- Create a Clipping Mask above it and paint your spots in dark brown or near-black with the new brush.
This keeps the pattern inside the shape of your animal and makes it easy to recolor. Many artists also make a companion brush for the base fill with a soft tonal grain, so the base has subtle variation instead of a flat tone. That's the reason some free leopard sets ship as a pair of brushes, one for spots and one for fill.
For the belly and chest, paint a lighter base, and reduce the brush scale or opacity near the legs and face where cheetah markings get smaller.
Importing Free or Shared Brush Sets
If you'd rather start from a shared brush set, a common issue is that the file won't open from a cloud folder. If you get an "unsupported file" message, go to your recent files in the cloud storage app, tap the three dots next to the .brush file, choose Open in, and select Procreate. Sets with more than one brush need each file imported separately.
Using the Brush in a Motion Pipeline
Procreate is a stills tool, but a cheetah pattern is useful downstream in animation and compositing.
Export and tile in After Effects. Export your artwork as PNG or PSD. In After Effects, apply Motion Tile to a layer using your pattern tile to check that it repeats cleanly at larger sizes, and to scroll or scale it procedurally.
Use it as a texture in 3D. Export the tile and plug it into an image texture node in Blender or a material in Cinema 4D with repeat enabled. If you see seams, return to Step 3.
Separate layers for animation. Paint spots and base on different layers and export them separately. That gives you control in After Effects to adjust color, add displacement, or animate spots independently.
Common Mistakes to Avoid
- Drawing rosettes. Rings belong to leopards and jaguars. Keep cheetah spots solid.
- Using gray instead of black. Weak contrast gives a faded brush.
- Letting marks touch the tile edges. This is the most common source of visible seams.
- Leaving grain on Moving. The pattern will smear and swim across the stroke.
- Overwriting your original brush. Always duplicate first.
Quick Recap
- Make a 3000 × 3000 px canvas.
- Draw solid black spots on white, away from the edges.
- Duplicate four times, shift each copy to a corner with snapping, and fill the middle.
- Export the flattened tile.
- Duplicate a brush, import the tile as Grain, set it to Texturized, and adjust Scale and Depth.
- Test, refine, and pair it with a base-color brush or layer.
Once you've made one, the process is fast, so you can build a set of other animal patterns using the same workflow: zebra stripes, giraffe patches, or snake scales. Each starts from a seamless tile and the same grain settings.