How to Make a Checkerboard Pattern in Procreate
StyleFrame Team9 min read
To make a checkerboard in Procreate, create a square canvas, fill it with one color, shrink the layer into a corner using Transform with Snapping on, then repeat with a second color in the opposite corners. Merge the result into a 2×2 tile, shrink that tile into one quadrant, duplicate it into the other three, and repeat until the squares are the size you want. Choose a canvas size that divides evenly (2048 px is a safe choice) so every square lands on whole pixels and no hairline seams appear.
What You Need Before You Start
- Procreate on an iPad (an Apple Pencil helps but isn't required, since this is mostly drag and drop)
- Two colors with enough contrast to read at small sizes
- A square canvas at a size that can be halved several times without fractions
Canvas size is worth planning. A 3000 × 3000 px canvas halves to 1500, then 750, then 375, then 187.5. That last step produces a half pixel, which can leave squares slightly misaligned and show up as light lines between them. A 2048 × 2048 canvas halves cleanly to 1024, 512, 256, 128, 64, and so on. If you need a different final resolution, pick any size with enough factors of two for the number of subdivisions you plan to make.
Set the canvas to 300 DPI if the pattern will also go to print. For motion work, DPI doesn't matter. Pixel dimensions do.
Step-by-Step: Build the Checkerboard
1. Create the square canvas
Open a new custom canvas at 2048 × 2048 px. Leave the background layer alone for now. You'll build on separate layers so you can recolor later.
2. Fill the first layer with Color A
Drag the color from the color circle onto the canvas to fill it completely. This fill is the "square" you'll shrink and place.
3. Shrink it into one quadrant
Tap the Transform (arrow) tool and open the Snapping settings. Turn on Snapping and Magnetics. Choose Uniform, then drag a corner handle toward the center until the shape snaps to the exact midpoint guides. The layer should now occupy exactly one quarter of the canvas, top left.
If your version of Procreate exposes numeric position and size fields in the Transform panel, typing exact values is more reliable than dragging. A drag can land a pixel or two off when you lift the Pencil, and that error shows up later as a visible line.
4. Add Color B on a new layer
Create a new layer and fill it with your second color. Transform it down into the quadrant diagonal to the first one (bottom right if the first is top left).
5. Complete the 2×2 tile
You now have two diagonal squares. Merge the two layers by pinching them together. Then duplicate the merged layer and use Transform to flip it horizontally. Place the flipped copy so the empty quadrants are filled and the colors alternate. A second option is to duplicate each square and slide the copy to the opposite corner.
Merge everything into a single layer. This is your 2×2 tile. Before you continue, duplicate it and hide the copy as a backup. You'll be glad you kept it if a later step goes wrong.
6. Subdivide for smaller squares
Take the merged 2×2 layer and shrink it into one quadrant with the same Snapping method. Duplicate it three times and move each copy into the remaining quadrants. You now have a 4×4 checkerboard. Merge and repeat for 8×8, 16×16, or as fine as you need.
Each pass doubles the number of squares per side. Stop when the squares match your design intent. For an 8×8 chessboard-style grid, you need two subdivisions from the 2×2 tile.
7. Check the seams
Zoom in to 400% or more and pan across the borders between squares. You should see crisp, hard edges and no lighter lines. If you do see lines, undo back to the last step and re-enter exact values, or switch to a canvas size that divides evenly.
Variations Worth Knowing
Use a drawing guide as a safety net
Open Actions, then Canvas, and enable Drawing Guide. Edit the 2D Grid and set the grid size to your canvas width divided by the number of squares you want. With the grid visible, you can quickly confirm that every square sits on the lines. Keep in mind that the grid is a visual check and a snapping aid, not a replacement for clean halving.
Make it wavy
Once you've merged the final grid into a single layer, open Adjustments and choose Liquify. Use it at a modest size to nudge the squares into soft curves. Do this last. Once the layer is liquified it is no longer a clean tileable repeat, so keep an untouched copy if you also need the flat version.
Rotate to a diamond (argyle-style) layout
Rotate the finished layer 45 degrees with Transform and scale it up until it covers the canvas edge to edge. This pattern won't tile seamlessly on its own, so treat it as a one-off background. If you need a repeat, work out the tile boundary first or build the diamonds in After Effects instead.
Rectangular checks
Fill and shrink non-uniformly. Turn off Uniform in Transform and compress the fill vertically or horizontally before placing it. Keep the aspect ratio consistent across every subdivision so the pattern stays regular.
Recolor without rebuilding
Build the pattern using one color layer over a contrasting background so you only change two swatches. Keeping an unmerged 2×2 group makes later color changes far faster than recoloring a flattened grid.
Exporting for Motion and Compositing
Procreate is fast for building a custom tile, and the export step decides whether it's useful in a video pipeline.
- Export as PNG for lossless edges. JPEG compression will smear the hard borders between squares.
- Consider keeping the canvas a power of two if the file is going into a texture workflow, such as Cinema 4D or Blender materials.
- Export the 2×2 tile separately from the finished grid. In After Effects, the Motion Tile effect can repeat a small tile across any comp size, which keeps files light and lets you animate the offset for scrolling backgrounds.
- Mind your color space. Check how your comp or project handles color management, or the checker colors may look slightly different on import.
A note on scope: if all you need is a flat checkerboard inside After Effects, the built-in Checkerboard effect under Generate is quicker and resolution independent. Procreate earns its place when you want hand-picked palettes, liquified distortion, texture, or pattern work that starts as a painting and ends as a motion asset.
In Cinema 4D or Blender, load the PNG as a texture and set the tiling in the material rather than baking a huge image. For Nuke, bring it in as a Read node and use a Transform or a tiled lookup to repeat it.
Troubleshooting Common Problems
Thin white or light lines between squares. Often caused by fractional pixel sizes or a slightly misplaced drag. Switch to a power-of-two canvas and use numeric entry or Snapping.
Squares aren't equal. Check that Uniform is on during resizing, and that you merged layers before shrinking them. Shrinking a group with a different bounding box shifts its position.
Colors look muddy or soft at edges. Turn off any layer effects, and make sure you're not scaling a layer by a non-integer factor. Halving is clean. Scaling by 0.6 is not.
The pattern doesn't tile in After Effects. Make sure your tile's edges are a full square of each color with no padding. Then set Motion Tile's Tile Width and Height to match your output size ratio, and enable Mirror Edges only if you want reflections rather than a repeat.
Where Styleframe Fits After the Pattern Is Built
A checkerboard from Procreate is a precise graphic asset. The next question for many motion designers is how to turn it into something that moves or carries a distinct look, without losing control of the design. Styleframe, an AI video and motion tool built for professional artistic control, can serve as a step between the flat pattern and your final comp.
Styleframe works from reference images, video clips, and keyframes rather than a single text prompt. In practice, you might:
- Use your checkerboard as a reference in Restyle or Ink-and-Paint to carry its graphic language onto footage or a rough animation, so the look stays tied to your original design.
- Set start and end keyframes in Frames-to-Video to generate a transition between two pattern-driven frames, such as a flat checkerboard morphing into a warped, painterly version.
- Run a flat pattern through 2D-to-3D or Turntable to explore it as a dimensional object, then use Remove Background to isolate it.
- Finish with 4K Upscale so the result holds up at delivery resolution.
Iteration is non-destructive, so you can keep refining one version without overwriting another. Output is image sequences, which drop straight into After Effects or Nuke. The current image-sequence workflow lets you keep compositing, color work, and final assembly where they are. The pattern stays under your control, and Styleframe becomes one more source of footage and elements inside your existing pipeline.
Quick Recap
- Create a square canvas that halves cleanly, such as 2048 × 2048.
- Fill with Color A, shrink into a quadrant with Snapping and Magnetics on.
- Add Color B on a new layer, place it diagonally, and merge into a 2×2 tile.
- Shrink the tile into one quadrant, duplicate it into the others, and repeat for finer squares.
- Zoom in to check for seams, keep a backup of the 2×2 tile, and export as PNG.
- Repeat the tile in After Effects with Motion Tile, or use the pattern as a reference for stylized motion work.
Once you've built the tile once, the method scales to stripes, plaids, and other repeats. The same halve-and-duplicate logic applies to all of them.