How to Make a Bubble Letter Brush in Procreate
StyleFrame Team9 min read
To make a bubble letter brush in Procreate, draw a glossy, outlined circle on a large square canvas, copy it, and import it as the Shape source of a new brush in Brush Studio. Then set spacing low, raise stabilization, and map Apple Pencil pressure to size so strokes build into soft, inflated letterforms. The result is a reusable brush you can export as transparent PNGs or frame sequences for After Effects.
What you need before you start
- Procreate on an iPad (the steps below use Procreate's standard Brush Studio)
- An Apple Pencil, or any pressure-sensitive stylus Procreate supports
- A square canvas, large enough that your stamp stays sharp when the brush is scaled up
Bubble letters are rounded, puffy forms with consistent stroke thickness, a clear outline, and a highlight that suggests volume. Keep that in mind as you design the stamp. The brush only has to deliver that look when you drag it along a path.
Step 1: Create a square canvas for the stamp
Tap the plus icon in the Gallery, then the custom canvas option, and set width and height to the same value. A large square such as 3000 × 3000 px gives you headroom, since brush shapes get scaled and soft edges can turn crunchy if the source is small. Name the canvas something like "Bubble Stamp" so you can find it later.
Step 2: Draw a clean circle
Pick a hard, even-weight brush from the Calligraphy set, such as Monoline, and draw a circle. Hold your pencil at the end of the stroke until QuickShape snaps it into a shape, then use the edit option at the top to convert it to a perfect circle. Use the Transform tool to size it so it sits comfortably inside the canvas with a margin on every side. The margin matters because a stamp that touches the canvas edge gets clipped.
Fill the circle by dragging your color into it (ColorDrop). White works well as the base because you can recolor strokes later with Alpha Lock.
Step 3: Build the outline and the soft edge
You want a bold outline with a slightly softened inner glow. A reliable approach:
- Duplicate the circle layer.
- On the top copy, invert the colors so you have a contrasting shape.
- Shrink that top copy slightly so the larger circle shows as a thick rim.
- Apply a light Gaussian Blur (roughly 10–15%) to soften transitions.
Next, add a new layer and use a soft airbrush at moderate size to shade around the inside of the rim and add a small highlight near the top. Keep your touch light. The goal is gentle volume, not a hard 3D render. A single curved highlight is often enough to make a shape read as glossy.
When the layers look right, merge them into one so you have a single flattened stamp.
Step 4: Prepare the stamp for use as a brush shape
Procreate's Shape source works on luminance: white areas paint, black areas don't, and gray gives partial opacity. That has a practical consequence. If you copy a stamp with a black outline on white, the outline will behave as "empty" space in the brush.
So decide what you want:
- A solid, puffy blob brush: invert the stamp so the circle is white on black. The brush paints in your selected color wherever the stamp is bright.
- A shaded, glossy brush: keep the gray gradations in the stamp, so inner shading shows up as variations in opacity.
Merge the layers, then tap the merged layer and choose Copy. Procreate's clipboard now holds your stamp.
Step 5: Create the new brush in Brush Studio
Open the Brush Library, scroll to the top, and tap the plus icon to create a new brush. Brush Studio opens with a list of settings on the left. Work through these:
Shape
Open Shape, tap Edit, choose Import, then Paste. The stamp from your clipboard becomes the shape source. Confirm with Done. If you want the stamp to follow the angle of your pencil, enable Azimuth in the shape behavior options. For a symmetrical circle it makes little difference, but it helps if you later build non-circular stamps.
Stroke path
Drop Spacing close to zero. Low spacing makes overlapping stamps merge into a continuous tube instead of a dotted trail of circles. Raise StreamLine substantially under stabilization. Bubble letters depend on smooth, confident curves, and heavy stabilization removes hand wobble.
Apple Pencil
Under Apple Pencil, raise the pressure response for size so a harder press makes a fatter stroke, and lower the pressure effect on opacity so strokes stay consistent. Test both. Some artists prefer constant size and variable opacity for a watercolor-like gloss, while others want the opposite for crisp sticker-style letters.
Rendering
Rendering mode affects how overlapping stamps combine. Light Glaze is a good starting point for soft, glossy buildup, but try the other modes too. Keep in mind that a mode that looks great on a white canvas may behave differently over a colored background.
Properties
Set a sensible maximum and minimum brush size. Without a minimum, a light touch can produce a nearly invisible stroke, which is frustrating mid-letter.
Name the brush, tap Done, and you're back on the canvas.
Step 6: Test the brush on real letterforms
Open a fresh canvas and write a few characters. Test:
- Straight strokes to check for even thickness
- Tight curves like "S" and "e" to see whether the stroke stays smooth
- Overlaps where two strokes cross, such as in "t" or "k"
- Start and end points to check the stroke tapers or caps the way you expect
If the result looks lumpy or you see scalloped edges, spacing is probably too high. If stroke ends feel abrupt, adjust the pressure curve or minimum size.
Fixing common problems
Inner outlines appear where strokes overlap. A stamp with a built-in dark rim will draw that rim every time it overlaps itself. To avoid this, make the stamp a plain filled shape and add the outline as a separate step: duplicate the lettering layer, fill it with your outline color using Alpha Lock, and enlarge or blur it behind the original layer. This is the more robust approach for production lettering.
Strokes look pixelated. Rebuild the stamp on a larger canvas, or reduce the maximum brush size.
The brush feels laggy. Lower the stamp resolution slightly or reduce the amount of stabilization.
Highlights look flat. Add them on their own layer after the lettering is done instead of baking them into the stamp. A single white swoosh drawn by hand often looks better than a repeated highlight.
Exporting bubble lettering for motion work
Procreate is only the drawing stage. For motion designers, what matters is getting clean assets into your compositing app.
- Transparent PNG: hide the background color layer in Canvas settings, then export as PNG. Keep each letter or word on its own layer and export layers separately so you can animate them independently.
- Layered PSD: export as PSD to keep layers, then import to After Effects as a composition with layers retained.
- Frame-by-frame animation: Procreate's Animation Assist lets you draw letters across frames and export as an image sequence, GIF, or video. For anything headed to a final timeline, a PNG sequence with alpha is usually the safest choice.
Work at a resolution above your delivery size if the lettering will be scaled up in After Effects. Raster artwork doesn't scale up cleanly, and extra pixels give you room for camera moves and punch-ins.
Where Styleframe fits in a bubble letter workflow
A brush gives you the look of one handmade frame. Animating that look is a different problem. Redrawing each frame in Procreate is slow, and simple transforms in After Effects can make hand-drawn lettering feel stiff. is an AI video and motion tool built for artists who want control over the output, and it can pick up from the lettering you've already drawn.
- Frames-to-Video: use keyframes of your lettering, such as a flat pose and a squashed pose, and generate the motion between them. The result is driven by your frames, not a text prompt.
- Restyle and Ink-and-Paint: apply the look of your bubble lettering to other footage or frames by using your Procreate artwork as the style reference.
- 2D-to-3D and Turntable: turn flat lettering into a dimensional asset and generate a rotating view, useful for puffy, inflated titles.
- Remove Background and 4K Upscale: clean up exports and deliver production-ready 4K.
Each generation is guided by reference images, video clips, and keyframes, and iteration is non-destructive, so you can try variations without losing earlier versions. Output comes out as image sequences, which means you can bring it into After Effects or Nuke and keep compositing the way you already do. Treat it as an extension of your lettering process, not a replacement for it: you still design the letterforms and the brush, and the tool helps carry that design through motion.
Quick checklist
- Square canvas, 3000 px or similar
- Clean circle, filled, with soft shading
- Flatten and copy the stamp
- Brush Studio: import to Shape, spacing near zero, stabilization up
- Map Pencil pressure to size, pick a rendering mode
- Test on letters with curves and overlaps
- If outlines double up, separate fill and outline into layers
- Export transparent PNGs, PSD, or PNG sequences for After Effects
FAQ
Can I make a bubble letter brush without an Apple Pencil? Yes, but pressure-based size and opacity won't work, so you'll rely on fixed settings and manual size changes.
Why does my brush paint in the wrong color or look inverted? Shape sources read brightness. White paints and black doesn't, so flip the stamp if the result looks backwards.
Should I use one brush for fill and outline? For clean production work, no. Using separate layers for fill, outline, and highlight gives you more control and avoids overlap artifacts.
What's the best format to send to After Effects? Layered PSD for static lettering, PNG sequences with alpha for frame-by-frame animation.