How to Make a Blending Tool in Procreate
StyleFrame Team9 min read
Procreate doesn't label any of its preset brushes as blenders, so you build one: duplicate a brush, open Brush Studio, and tune its Wet Mix settings (Dilution, Charge, Attack, Pull, Grade) so it drags existing color instead of laying down new paint. You can then use that brush as a painting brush or assign it to the Smudge tool, which lets any brush in your library act as a blender. For quick whole-layer softening, Gaussian Blur in the Adjustments menu does the job without a custom brush.
What "Blending Tool" Means in Procreate
Procreate offers three built-in ways to blend:
- Smudge tool: pushes pixels already on the layer using the shape and texture of whichever brush you select. It adds no color of its own.
- Wet Mix brushes: brushes whose mixing behavior is built into their settings, so they can both deposit and drag color.
- Gaussian Blur: an adjustment that softens an entire layer or selection uniformly.
When artists talk about making a blending tool, they usually mean a custom brush that behaves like a blender, either used directly or loaded into the Smudge tool. The built-in Turpentine brush, in the Artistic set, is a good reference. It mixes colors on the layer using texture, and it adds a hint of your selected color when used as a normal brush. When you select it under Smudge instead, you get a colorless blending effect with the same character.
That distinction is the key design decision. A blender that deposits color is good for painterly work where you want to push and add at the same time. A pure smudge blender is better for refining transitions without changing your palette.
Step-by-Step: Build a Custom Blender Brush
1. Duplicate a brush as your base
Never edit a stock brush directly. Pick a brush with a texture close to the finish you want, swipe left on it in the brush library, and tap Duplicate. Good starting points:
- A soft airbrush for smooth, subtle transitions. Be aware that soft brushes can go blurry fast.
- A chalk, gouache, or acrylic-style brush for painterly, textured transitions.
- Turpentine if you want a ready-made Wet Mix behavior to modify.
Rename the duplicate right away (for example, "Blend – Dry Chalk") so your library stays organized.
2. Open Brush Studio and find Wet Mix
Tap the duplicated brush to open Brush Studio. The Wet Mix section (listed under Dynamics in some versions) holds the controls that make a brush behave like a blender:
- Dilution: how much color the brush puts onto the canvas. At zero, the brush is effectively colorless, which is what you want for a pure blender.
- Charge: how much color or effect is present at the start of a stroke.
- Attack: how much color or effect continues as the stroke goes on.
- Pull: how strongly existing colors are dragged across the canvas.
- Grade: smoothing of the brush effect.
Start with low Dilution and moderate Pull, then adjust one slider at a time. Changing several together makes it hard to learn what each one does. Raise Pull when you want long, sweeping drags of color. Raise Grade when you want a cleaner, smoother result.
3. Shape the texture with Grain and Shape
Wet Mix controls how colors move, but Grain and Shape control what the transition looks like. A soft, grainless shape gives airbrushed gradients. A textured grain leaves visible tooth, which reads as hand-painted and hides banding in large gradients.
If your blends look muddy or plasticky, the fix is often here rather than in Wet Mix. Add or swap a grain texture before touching Pull again.
4. Set pressure and tilt response
Under the Apple Pencil settings, tie pressure to the effect so you can go from a whisper to a firm drag in a single stroke. Light pressure should barely disturb the underlying color, and heavier pressure should move more paint. This is what lets you blend delicately around highlights without wrecking edges.
5. Test, then save variants
Make a test canvas with two or three adjacent color fields, ideally analogous colors like blue and purple, since they blend most naturally. Drag the brush across the boundaries at different pressures and sizes. Then duplicate the brush again and save variants: a tight "detail blender," a large "sweep blender," and a textured "paint blender." Three well-tuned brushes cover most situations.
Using Your Brush with the Smudge Tool
The Smudge tool is the hand icon in the top toolbar, next to the brush tool. Select it, then choose any brush from the library, including your new blender. Smudge uses the brush's shape and texture but only moves existing pixels.
Some practical habits:
- Use light, sweeping strokes that follow the form of the shape rather than scrubbing back and forth. Scrubbing is the quickest route to muddy color.
- Lower the tool's opacity for delicate work such as soft highlights, clouds, or skin transitions. This gives you gentler control than adjusting pressure alone.
- Match the brush to the result. Soft airbrush smudging gives smooth blur. Textured brushes give painterly transitions.
- Check the brush's own Smudge setting. Each brush has a smudge amount, from 0% to 100%, in its settings. At 0%, there is no smudge effect when that brush is used with the tool.
Faster Alternatives When You Don't Need a Custom Brush
Gaussian Blur for whole layers
Open the Adjustments menu (the magic wand icon), choose Gaussian Blur, and drag your Pencil or finger across the screen. The percentage at the top shows the blur amount, and higher values give a smoother result. This is the fastest way to turn stripes of color into a smooth gradient, and it works well for backgrounds.
The downside is that it is uniform. Everything on the layer softens equally, so it's wrong for areas where you need crisp edges.
A hybrid technique: blur, then restore detail
A reliable approach for keeping some edges sharp:
- Duplicate your layers and hide the original set.
- Merge the duplicates into one layer.
- Apply Gaussian Blur lightly to the merged layer.
- Unhide the originals beneath, then use the Eraser on the blurred layer to bring back crisp detail at edges and focal points.
This smooths transitions while keeping focal areas sharp, and everything stays non-destructive because the originals are intact.
Airbrush for edge-softening while you paint
Airbrush-style brushes blend stroke edges as you lay them down. They're good for building gradients directly, with less cleanup afterward.
Layer modes to support blending
Set shadow layers to Multiply and highlight layers to Screen, then smudge those layers into the base. The blending stays contained to each layer, so you can revise shadows without disturbing your underlying color.
Why This Matters for Motion and VFX Work
Procreate isn't a motion tool, but many motion designers, concept artists, and VFX artists use it for styleframes, matte painting elements, hand-painted textures, mood boards, and animation key art. A reliable blender brush helps most in these cases:
- Painted gradients and glows that need to avoid the banding of a flat digital gradient. Texture in the blend helps hide it.
- Hand-painted texture maps for Cinema 4D or Blender, where you want organic variation rather than procedural noise.
- Styleframes that establish color, light, and atmosphere before you build anything in After Effects.
- Roto-adjacent paintwork, such as painting fixes or elements over frames before bringing them into a Nuke comp.
Getting it into your pipeline
Export as a layered PSD when you want to keep your layers for After Effects or Photoshop, or as a PNG for flattened elements and textures. Keep layers separate for anything you plan to animate, such as highlights, shadows, and background gradients, so you can move them independently in After Effects. Check your canvas color profile before you start, and keep it consistent with the rest of your pipeline so colors don't shift on import.
Where Styleframe Fits
Once you have a painted styleframe with controlled blends and a distinct texture, the next question is often how to turn it into motion without losing the look. Styleframe is an AI video and motion tool built for professional artistic control, and it works from your references rather than a single prompt. You can use your Procreate frames as keyframes in Frames-to-Video, so the generated motion travels between images you made. You can also use a painted frame as a style reference for Restyle or Ink-and-Paint, which apply that look to footage through reference-driven style transfer.
Every generation is driven by reference images, video clips, and keyframes, and iteration is non-destructive, so you can refine and compare without overwriting earlier results. Other tools cover adjacent steps: 2D-to-3D, Turntable, Remove Background, and 4K Upscale, with output at production-ready 4K. Styleframe exports image sequences, so the results drop into your existing After Effects or Nuke compositing workflow, and an After Effects plugin is on the way. It's a complement to your pipeline rather than a replacement for your painting or compositing tools, and it doesn't make decisions your keyframes haven't already made.
Troubleshooting Common Blending Problems
- Colors turn muddy. You're probably scrubbing back and forth, or blending complementary colors. Use fewer, longer strokes, lower the opacity, and try analogous colors first.
- Everything looks blurry. The brush is too soft. Switch to a textured brush, or raise the grain.
- The blender adds unwanted color. Dilution is too high. Lower it toward zero, or use the brush through the Smudge tool.
- Blends look flat and digital. Add grain and vary pressure. Combine the custom brush with a light Gaussian Blur and restore detail where needed.
- The brush barely moves anything. Increase Pull, check the brush's Smudge amount, and make sure you're working on the right layer.
Final Thoughts
The simplest route is to duplicate a textured brush, set Dilution low, tune Pull and Grade, and use it through the Smudge tool at reduced opacity. Save a few variants for different jobs, and fall back on Gaussian Blur for large gradients. Once the brushes are set up, you can paint transitions quickly and export clean elements into your motion workflow.